Used Smg Ds 25 for sale (16,858)

Condition: ready for operation (used), Manual spindle press / 25 tons -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm Pjdpfx Aozcxdlolwsrb -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Errors and omissions excepted.

Condition: used, first registration: 04/2006, Year of construction: 2006, KRONE 7.3 LS4 - CS Tarp/Curtain-sided - / Tautliner demountable body with Edscha convertible top !!! 25 units in stock !!! ● Side sliding tarps ● EDSCHA convertible top ● Portal doors at the rear ● 4-point torsion bar locking system Prjdpfx Aozcaccolwjb ● Wooden floor ● Recessed rails on the right and left sides for securing the load ● Internal / loading dimensions: 7,350 x 2,500 x 2,530 mm (L x W x H) !!ALMOST NO RUST!! - Good condition for its age! - Subject to errors and prior sale!

Year of construction: 2023, condition: ready for operation (used), An industrial Hobart conveyor dishwasher is available. Heating: electric, conveyor width: 612mm, conveyor height: 440mm, working height: 920mm, conveying direction: left-right, total connected load: 81kW, water fill volume: 340l, water pressure range: 1.5bar-10bar, DI water consumption: 220l/h, DI water temperature: 12°C, water hardness: 3°dH, conductivity: 80µS/cm, total machine exhaust air: 1500m³/h. Machine dimensions X/Y/Z: approx. 7550mm/1200mm/2150mm. Documentation available. An on-site inspection is possible. Podpfozmymuex Alworb

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Prodszn N H Tspfx Alwob

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Prodozdk A Uopfx Alwob Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. Pjdpfx Aljznkx Dsworb The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Predpfxsw Dy Rqo Alweb

Condition: like new (used), Year of construction: 2022, Bystronic ByBend Smart Hydraulic press brake Serial number: BYBEND22335SE Year of manufacture: 10/2022 Maximum pressing force: 2250 kN Working length: 4100 mm Maximum stroke: 300 mm Predpfx Asy U I Ryolweb Machine weight: 16,500 kg Equipment: Tools

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Rated force: 12.5 kN Stroke: 100 mm Pjdpez Hlzhjfx Alwsrb Including SCHMIDT PressControl 75 in the two-hand safety version Weight approx.: 45 kg 30926ä

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Iveco 180E32K Wheelbase: 4,185mm, New vehicle, not yet registered. 2-year factory warranty from initial registration. Color: White, Code 50105 IC 194. Transmission (9 gears), Euro 6. Ready for DELIVERY The following accessories are included: 00015 – Axle ratio 5.29 00131 – Differential lock 00166 – Tubular rear bumper 00541 – Battery disconnect switch 08289 – Preparation for toll system 05899 – Right-hand driver's seat armrest 00640 – Mechanical tilting roof 07747 – Dirt-resistant, easy-to-clean interior 00553 – Headlight protection grille 02085 – Trailer socket for 24-volt operation 00430 – Trailer version for towing 05210 – ZF power take-off 06319 – 360 ccm air compressor 06403 – Tipper version 00219 – Two wheel chocks 00568 – 143 Ah batteries 00590 – Seatbelts 00632 – Sun visor 00693 – Electric windows 01483 – Preparation for PTO 02096 – Heated dryer 02181 – Central engine exhaust 02211 – Warning triangle 02463 – Cruise control 02650 – Manually adjustable air conditioning 02662 – Anti-splash mudguards 02688 – Heat-reflecting glass 02714 – Electrically adjustable and heated rearview mirrors 06150 – Rear cross member, D-value 100 KN 02912 – LDWS (lane departure warning system) 02289 – Heated fuel filter 04572 – Expansion module 05456 – Rearview mirrors for body mounting, 2500 mm 05534 – First aid kit 06555 – Fog lights 06620 – Comfort driver's seat 06629 – Headrests 06617 – Passenger seat for 2 persons 06891 – Immobilizer 07440 – Weight limits 7,500-12,000 kg 75181 – Audible reversing alarm 08277 – Heated urea tank 08297 – EVSC (electronic stability control) 75056 – LED daytime running lights 01395 – Bluetooth radio 75499 – 200-liter fuel tank 05267 – 30-liter AdBlue tank 75502 – Air filter unit on the right, in the rear of the cab 77023 – EBS (electronic braking system) 06314 – 70° alternator 06318 – 225 ccm air compressor 20790 – Tires 315/80 R 22.5 07700 – Jack 02443 – Leather steering wheel with controls 00191 – Radiator protection 00160 – Front bumper, sheet metal 00744 – Window behind the cab Pedsxybrrepfx Alwsrb 02210 – Spare wheel 02721 – Spare wheel carrier on the side of the chassis 08554 – Semi-elliptical leaf spring suspension with trapezoidal spring on the rear axle 08551 – Semi-elliptical leaf spring suspension with trapezoidal spring on the front axle Emails will not be answered. If interested, please call us. Sales only to businesses or for export. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 - Standard shafts - Special shafts - Customer-designed shafts - Spare parts - Knives Pjdpfx Ajychwzelwsrb Concrete / Paddle / Star / Metal / Electro and many more!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Prodpfx Alsyz S Ngowsb Dimensions: 5700 x 2610 x 3300 mm

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 14200229, Equipment: documentation/manual, The labeller is equipped with a Domino V 220i thermal transfer printer. Both are in like-new condition. Prjdpsygv Hxjfx Alwsb

Condition: used, System: Mobile dewatering system, decanter, and mobile centrifuge - used Application: Sludge dewatering Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Pedpfx Alswmwrqewsrb Operating hours: 29,200 Generator operating hours: 31,640 (see enclosed nameplate)

Condition: used, Year of construction: 2008, functionality: fully functional, grinding width: 635 mm, grinding height: 133 mm, – Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: – Rated power: 5550 W – Actual power: 3700 W = 3.7 kW – Max. sanding width: 635 mm – Max. workpiece thickness: 133 mm – Min. workpiece thickness: 0.8 mm – Min. workpiece length: 230 mm – Sanding rollers: 2 x ø 152 x 635 mm – Height adjustment for the second roller – Speed: 1400 rpm – Sanding belt width: 600 mm – Two feed rates – Machine dimensions (L/W/H): 110 / 110 / 110 cm – Weight: 332 kg Predpfow Ip Huox Alwob

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Psdpfxjx Apcks Alworb

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Pedpfx Alsz Ekcnewsrb Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. Podpfx Alez Eiigowerb The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Psdpjup Si Hsfx Alwjrb Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, Year of construction: 1987, pressure 125 t Predpfx Ajt Hwuislwjb distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Predpfxoxra Rwj Alweb Working range laser: 8000 x 2500 x 150 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 15000 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 20200 mm Width: 4150 mm Height: 2620 mm Machine weight: 32500 kg

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz Pedpfsz Hfl Hox Alwsrb delivery time: on request terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,000 h, includes 3x Brabender gravimetric dosing units includes stand includes chiller includes temperature control unit includes 1x side feed; a second LSB (lateral screw feeder) is also included, and installation is possible on each cylinder. Pjdpfoz Eu S Tsx Alworb More information available upon request. Inspection is possible in Hilpoltstein.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 212062, functionality: fully functional, cutting height (max.): 1,550 mm, cutting width (max.): 3,300 mm, saw blade diameter: 250 mm, overall weight: 1,250 kg, plate height: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 1,550 mm Maximum horizontal cutting height: 1,510 mm Maximum cutting width: 3,300 mm Maximum cutting depth: 55 mm Maximum saw blade diameter: 250 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6 A Fuse rating: 16 A Power: 2.2 kW Prodpfxoz Eav Re Alweb Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 4,510 x 1,450 x 2,300 mm Unladen weight: 1,250 kg FEATURES CE marking Horizontal cutting Vertical cutting

Condition: like new (used), Year of construction: 2015, operating hours: 8,000 h, functionality: fully functional, We offer this ANAYAK XPERTA 25 fixed-table milling machine, in like-new condition, manufactured in 2015. Manufacturer: ANAYAK CORREA Model: XPERTA 25 Axis travels X-Y-Z mm 2,500 x 1,000 x 1,000 Table mm 2,300 x 1,000 Maximum table load Kg 4,500 Tool holder - ISO 50 Spindle speed Rpm Pjdpfx Aljz Evf Ijwjrb 6,000 Spindle motor Kw 24 Spindle torque N/m 286-382-840 Rapid traverse rates XYZ axes m/min 20 CNC - Heidenhain iTcn 530 Universal indexed head ° 2.5° CTS - Rollers Chip conveyor - Yes Footprint mm 5,200 x 3,500 x 2,800 Machine weight Kg 15,200 Year - 2015 If you have any questions or require further information, please do not hesitate to send us a message or call us.