PMH twin screw extruder25 mm - 32 l/d

PMH Plasticmaschinen handelsgesellschaft PMH DS25-32LD twin-screw extruder

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Csdpfx Aisx Sq I Nj Ssrh Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Csdpfskkiwxox Ai Serh

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Crodpfxsh Ad E Ho Ai Soh Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving 📋 Consisting of: • 24 x frames, pre-assembled / approx. 250 cm high / 80 cm deep / new • 92 x shelves / 128 cm long / 80 cm deep / 250 kg load capacity / used • 8 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €4,320 net, excluding VAT. • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment • Product number: P2601 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale, are reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used and new heavy-duty racking Description: Are you looking for high-quality storage racks to buy? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ READILY AVAILABLE: • Over 10,000 linear meters of racking systems available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a real all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and handover in a clean condition. Cjdpfx Aiod Nf Svj Sjrh Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. Csdpfx Aijwzmcbo Sorh DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. Codpforxt Axex Ai Sjrh • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm Cjdpfx Aijy A H Umo Serh • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Year of construction: 2006, condition: excellent (used), The device is in working order and was only used for testing purposes. Csdpfx Ajh Im Eqoi Sjrh A funnel is included.

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Codpfew Hy Uuox Ai Sorh

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options Crodevri Ddepfx Ai Ssh • Including haul-off • Including cooling bath