Used Spx Spx 034.Mgs.10.1 for sale (520)

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A56 GW26GA01430, Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers for 100 km/h with confirmation - all players from BSG Chemie Leipzig have signed here; subsequently coated with UV-resistant clear lacquer * Optimum road holding due to stable chassis with safety V-drawbar * Robust rubber spring axle with independent wheel suspension * Maintenance-free compact wheel bearings * Solid side walls with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for securing loads (model-dependent) * Sturdy cast steel toggle-clamp fasteners (model-dependent) * Non-slip, waterproof phenolic plywood floor Blsdeyqdtuepfx Apreh * All-round protected multifunction lights * Incl. lid Low loader by STEMA, type FT 8.5-20-10.1 with lid, gross weight: 850 kg, overrun braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: used, maximum load weight: 630 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2025, loading space length: 2,070 mm, loading space width: 1,145 mm, loading space height: 330 mm, total width: 1,495 mm, total height: 870 mm, A62 GW26RGA30254, type FT 7.5-20-10.1, open platform, WSE01AKC7, gross weight 750kg, 100km/h, jockey wheel installed ...and much more. Vehicle not refurbished. Subject to errors and prior sale. Blodsyqdrkepfx Aprsh

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A57 GW26GA01495, Bodpfx Ajyqdq Hsprslh Signatures of Eintracht Frankfurt players subsequently sealed with clear lacquer Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers approved for 100 km/h with certification* * Optimal road handling due to stable chassis with safety V-drawbar * Robust rubber suspension axle with independent wheel suspension * Maintenance-free compact wheel bearings * Sturdy side panels with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for load securing (model-dependent) * Robust cast steel angle lever locks (model-dependent) * Slip-resistant, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid/cover Low-loader, manufacturer: STEMA, type: FT 8.5-20-10.1 with lid/cover, gross weight: 850 kg, inertia braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Bledsynacyopfx Aproh Weight: approx. 1,000 kg

Condition: used, Year of construction: 2014, fuel type: diesel, color: red, Weights Empty weight: 7.660 kg Blodpov Tiqtefx Aprjh Functional Mast: articulated arm Lifting capacity: 280 kg Working height: 1.740 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1110 m Transport dimensions (LxWxH): 7,51x2,26x2,24 Production country: FR Additional information Please contact Christian Theißen for more information Units: 5314, 5316, 5317, 5318, 5319, 5320, 5321, 5322, 5323, 5324, 5325, 5326, 5327, 5328 Manufacturer: Haulotte Model: HA18SPX Year of build: 2014 Condition: Used Data: Max. working height: 17,37 m Platform height: 15,37 m Max. reach: 11,12 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,80 x 0,78 m Swivel range: 350° Max. climbing capacity: 40% Total dimensions LxWxH: 7,51 x 2,26 x 2,24 m Movable up to working height: 17,37 m Wheel pressure max.: 13 daN/cm² Ground clearance: 0,30 m Drive type: Diesel Own weight: 7.660 kg Special features: Rotatable work basket 2x90°, basket arm/angle of rotation 140°, all-wheel drive.

Condition: good (used), Year of construction: 2014, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 7.660 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.740 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1110 m Max swing of platform in degrees: 350 Transport dimensions (LxWxH): 7,51x2,26x2,24 Production country: FR Additional information Please contact Christian Theißen for more information Blsdpfx Apexxl Tdsrjh Manufacturer: Haulotte Model: HA18SPX Year of build: 2014 Condition: Used Data: Max. working height: 17,37 m Platform height: 15,37 m Max. reach: 11,12 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,80 x 0,78 m Swivel range: 350° Max. climbing capacity: 40% Total dimensions LxWxH: 7,51 x 2,26 x 2,24 m Movable up to working height: 17,37 m Wheel pressure max.: 13 daN/cm³ Ground clearance: 0,30 m Drive type: Diesel Own weight: 7.660 kg Special features: Drehbarer Arbeitskorb 2x90°, Korbarm/ Drehwinkel 140°, Allradantrieb. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Bsdpsrwlwvjfx Aprolh Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: used, functionality: fully functional, Item: DP-0601-Pump APV W+30/80 APV - Centrifugal pump Brand: APV/SPX Type: W+30/80-3220 130 Motor: 4.0 kW Speed: 2860 rpm Year: 1997 Inlet: 4" / Outlet: 3" Blodsx Tuu Ajpfx Aproh

Condition: excellent (used), Year of construction: 1991, machine/vehicle number: 834, The machine is completely operational, ready to work. Moves in 3 axes. Bedpsudyzxofx Aprelh

Condition: used, Used SPX Flow Technology APV model R15-18.56 stainless steel homogenizer. Has three piece valve housing. Maximum capacity 400 l/h with maximum pressure 800 bar. Mounted on stainless steel mobile skid. Unit includes process control skid. Bljdpsyh Nbvsfx Aprjh

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm Blsdpjfbbtlofx Aprjh -Piston diameter: 25 mm -Piston rod: 10 mm -Dimensions: 640/28/H28 mm -Weight: 0.95 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders Bsdpfx Aed Txg Isprolh -Stroke: 80 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 5 pieces -Dimensions: 219/30/H30 mm -Weight: 0.40 kg/piece

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw Blsdpopcmthjfx Aprjh -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 340/30/H30 mm -Weight: 0.6 kg/piece Bodpfod Ty Alex Aprolh

Year of construction: 2008, condition: good (used), Item: D-0611-Pump APV APV - Centrifugal pump Brand: APV/SPX Bsdpfx Apjiq U U Sjrelh Type: W+60/110 200 Year: 2008 3 kW Inlet: 4" / Outlet: 3"

Year of construction: 1996, condition: good (used), Auma actuators Required size please ask individually!!! Condition very good and ready for use. Voltage: 400V Output drive: A and B1-B4 Valve connection: F07; F10; F14; F16; G0; Bledpefdl Szefx Aprsh output speed: 0,52- 125 rpm Motor power: 0,025- 5,5kW Also gearboxes like: GST

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) Bedpfx Aeyg Rfcjprslh This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm Bsdpfxswu Tu De Aprjlh 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made Bledezabx Hepfx Aprsh – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar Bljdpey Tiq Sefx Aprjh - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2015, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Blsdpozak Ikefx Aprjh Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the agitator: 320 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1680 mm Maximum width of a container: 950 mm Floor>-to-agitator height (lower position): 65 mm Floor-to->top height of the agitator (top position): 1740 mm Dimensions: 111 x 130 x 327 cm   Technical documentation available Video showing the machine in operation in our workshops

Condition: excellent (used), load capacity: 5,000 kg, IMG 5-ton Double Column Lifting and Rotating Device with 3rd Axis Multifunctionality Extreme travel distance Blsdpfx Ajxxx Dvoprjh Tilting moment 6,500 Nm Rotary disc torque 1,200 Nm; rotation speed approx. 2 rpm Total load capacity 6,000 kg There are 4 versions: - Mono: single column lifting and rotating device - Duo: double column lifting and rotating device - Duo: double column lifting and rotating device with 5.5 m cross beam for bolting - Duo: double column lifting and rotating device with cross beam for bolting and additional 3rd rotary axis with 5-ton load capacity With EC Declaration of Conformity User manual and technical documentation available Optional: foot switch and cable remote control, as well as speed regulation on request

Condition: excellent (used), power: 2.21 kW (3.00 HP), Var-Spe 10.15/067B/BZ hydraulic variator Input shaft: Ø28mm Output shaft: Ø32mm Power: 2.2 kW 3HP Speed: 0-900 / 0-1430 rpm Installation position: Horizontal B3 Bledpfxorxd Axj Aprsh

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Nedcon Type: NS Technical specifications for installation: Number of rack rows: 1 Length per rack row: 10,100 mm Number of bays per rack row: 5 Number of levels plus floor level: 5 Technical specifications for volume: Pallet spaces per bay: 12 Number of pallet spaces per row: 60 Total number of pallet spaces: 60 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Blsdpfxov T Iwrj Aprjh Weight per pallet (max.): 1,000 kg Delivery includes: 6x pallet rack uprights, used Material color: cream-white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment pitch: 50|50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Upright height: 9,000 mm Upright depth: 1,100 mm 50x pallet rack crossbeams, used Material color: RAL 2008 orange Box profile: 90 x 40 mm Hooks: 4 HK (hooks) Clear width: 1,900 mm Max. load per pair of crossbeams: 2,000 kg at constant load. Distributed load 100x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. Bsdpsw Dnd Sofx Aprslh • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.