Used Wammes Plasma Cutting Machine for sale (67,395)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design Ndsdpfx Abszizkys Uob ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Parameters: Working width 2500 mm Working length 6000 mm Positioning accuracy +/- 0,005mm Thickness of plasma cutting - 35 mm Ndodoqntkiopfx Ab Ueb Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm. Njdstp Dhpjpfx Ab Ujdb  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Ndjdpfxozc Hn Es Ab Usb Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Ndedszd Ur Tepfx Ab Usb Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: ready for operation (used), Dimensions: Width: 180 mm Ndedpfx Ajxfk Dzob Uob Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Machine type: PP15088 AUTO Construction year: 2015 Input voltage: 380 V Phases: 3 Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call. Nsdpfxey Annbe Ab Uedb

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Ndjdpfxsyug Ens Ab Uob

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Cutting range steel up to 30mm, exchangeable head Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Shaft for processing pipes and profiles Nedporurraefx Ab Ujdb (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) Ndodpfx Asy Snwneb Usb - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 4,00,02,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Ndsdpfx Aow Al Rmob Ueb

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec 1530 – Your Ultimate Solution for Precision Cutting! Njdpfx Abjx Ngl Se Uodb Are you looking for the best entry-level cutting machine on the market? Your search ends here! With the kaitec 1530 plasma cutting system, you gain access to a world of unmatched cutting performance and unbeatable flexibility. No longer will you have to rely on external cutting services or deal with long lead times from suppliers. The kaitec 1530 plasma cutting machine is designed to put you in control of your cutting needs. Its intelligent material optimization saves you real money and reduces unnecessary transport costs. Say goodbye to lengthy waits for your orders – you set your own delivery times and work on your own schedule. Our kaitec 1530 cutter has taken the industry by storm for good reason. It combines performance, flexibility, and cost-efficiency like no other. Stop wasting time and money – choose the kaitec 1530 plasma cutting system to boost your productivity, save money, and accelerate your workflow. Welcome to the future of cutting! kaitec 1530 – Precision and Versatility for the Future of Cutting! Our innovative machine combines the power of plasma and oxyfuel processes, enabling you to cut materials up to an impressive 50 mm thick. Precision cutting has never been easier. Thanks to our integrated cutting database for mild steel, aluminum, and stainless steel, you have full control to select the ideal settings for each material. With 50 macros available to create cutting programs directly on the CNC control, your possibilities are virtually unlimited. The kaitec 1530 plasma cutting system not only ensures efficient workflow, but also helps optimize your costs. Our intelligent remnant sheet management and cutting cost module minimize material waste and reduce your production costs. Experience the future of cutting with the kaitec 1530 and increase your productivity, efficiency, and profitability. Welcome to a new era in cutting technology! Cutting area: 1,000 x 2,000 mm 1,500 x 3,000 mm Plasma cutting thickness: 1–25 mm Oxyfuel cutting thickness: 10–60 mm We look forward to hearing from you!

Condition: used, Year of construction: 2011, CNC portal plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2 x 4 m Ndedpey Nqcbsfx Ab Uob 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table 22926ä

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing Ndjdszwl Dmjpfx Ab Ueb - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filtration system: Z-Line 9 ZDC Our own technicians are available for installation, commissioning, and training! Nsdpfxsiff Daj Ab Usdb All spare parts are in stock. 22926ä

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 Nsdpfszp D S Tex Ab Usdb • Supplied new in 2017 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 • 4 m x 12 m bed

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Refurbished in 2026. Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts black steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected while in operation in Vilnius. Njdpfxowinpxo Ab Uedb

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Nsdpfsy Ipb Tjx Ab Uedb Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning Ndjdpfxsvpalaj Ab Ujb system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console including automatic rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Ndjdpfsw Rpvbsx Ab Usb Power: 9 kW Laser diode 22926ä

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. Ndjdpfx Abezpwcfo Usb An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. We look forward to your inquiry.

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm Njdpfx Aey Sxvhjb Ujdb with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Ndedpfx Abori Skao Uob

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 2,200 kg, input voltage: 400 V, total width: 3,000 mm, total height: 1,800 mm, total length: 4,300 mm, workpiece weight (max.): 1,000 kg, power of the servo motor: 750 W, working width: 1,550 mm, positioning speed: 50 m/min, table width: 1,550 mm, cutting current: 100 A, warranty duration: 24 months, working length: 3,050 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, Kompakt plasma cutter manufactured in Poland! Brand new machine, lead time from 8 to 12 weeks. Key features: - robust mechanics based on a welded and stress-relieved frame, - hardened helical rack gears, - fume extraction flap control system for enhanced extraction efficiency, - drawers for small parts and for easy cleaning of the combustion chamber, - one of the fastest machines on the market – 50 m/min, Nsdpfxjykpp Ie Ab Ujdb - ThermaCut EX-TRAFIRE 100SD plasma unit, - intuitive, straightforward controls, - fume extraction fan. Alternative configurations possible: - change of working area - use of a different plasma unit

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Type: HiFocus 80i Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose assembly and torch Manual gas control panel 22926 Ndedpfjzn Hp Ssx Ab Ujb