Used A.t.i.b. Bale Clamps for sale (9,457)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Djdpfxjzp H R Ej Adrokr Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Overall height: 590 mm Dkodpfozpbrkjx Adrer - 360° rotatable - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Weight: 41 kg Good condition

Condition: used, Year of construction: 2000, length 1000 mm width 1250 mm Dedezpbmnspfx Adrskr height 2600 mm

Condition: used, Year of construction: 2000, length 800 mm width 1250 mm Dkodjzpbmhopfx Adrer height 1500 mm

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Dksdpsthuzpefx Adrjr - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Dkedpfx Asznn Hlsdrer Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: good (used), Clamping angle, clamping aid Djdpfx Ajzn I U Aodrokr -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/160/H280 mm -Weight: 11 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping Dkedpfx Adezn I Upjrer -Groove: 100 x 36 mm -Dimensions: 250/180/H280 mm -Weight: 10.7 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Number: 3x mounting brackets available Dkedpfx Aozn I S Ujdror -Price: per piece -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Condition: good (used), Clamping angle, clamping aid Djdpfx Aozn I Nysdrokr -Clamping angle: for workpiece clamping -Groove width 27 mm -Dimensions: 280/250/H320 mm -Weight: 13 kg

Condition: good (used), Clamping angle, clamping aid Dedpfx Adjzn I Nmjrokr -Clamping angle: for workpiece clamping -Wall thickness: 36 mm -Groove: 72x22 mm -Dimensions: 370/205/H240 mm -Weight: 32.6 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping Dedpjzn I E Uefx Adrekr -Wall thickness: 30 mm -Groove: 45x24 mm / 34x18 mm -Dimensions: 270/145/H200 mm -Weight: 15.5 kg

Condition: good (used), Code: 0455 Brand: VALENTINI - ITALY Model: C 2 P Pneumatic clamp desk for drawers, furniture, frames, cabinet doors and various Technical data: Worktop dimensions 2500 x 1300 mm Worktop height from floor 720 mm N° 8 thrust cylinders with adjustable stroke N° 9 support fences Dodpfx Asznk Ncedrskr Cylinder thrust 586–790 kg N° 2 control panels Operating pressure 6/8 atm Overall dimensions mm 2600 x 1300 x 900 h Weight kg 1100

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Ganter, Aluminum Foot Clamp -Type: GN 473 B12 -Number: 35x holders available -Price: per piece, minimum order 3 pieces -Dimensions: 38/35/H25 mm Dkjdpfxsznu Szo Adrer -Weight: 0.033 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp, foot clamp holder -Manufacturer: Ganter, Aluminum Foot Clamp -Type: GN 473 B20 -Number: 28x holders available -Price: per piece, minimum order 2 pieces -Dimensions: 50/44/H35 mm -Weight: 0.076 kg/pc. Dkodpfxeznu Sne Adror

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp Dsdpfoznu Agsx Adrjkr -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece -Manufacturer: Rose Krieger, Flange clamp pipe connector flange, aluminum, one-piece for round tubes Dkedpfx Adsznt Diorer -Type: Size 12 mm -Number: 11x holders available -Price: per piece, minimum order 2 pieces -Dimensions: 50/35/H41 mm -Weight: 0.1 kg/pc.

Condition: used, Industrial T-Slot Clamping Table / Machine Bed, Used machine Dodpfxezkaz To Adrjkr Description: T-Slot Clamping Table / Machine Bed Type / Identification: 7111 Condition: Used, heavy-duty industrial design Overall dimensions: 3000 x 1750 x 355 mm Technical and operating parameters: Working table surface: 3000 x 1750 mm T-slot dimensions: 60 x 60 mm Profile alignment bore: 85 mm Ø (diameter)

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. Dedpfszti Uuex Adrokr No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, Year of construction: 2000, length 800 mm width 800 mm Dedjznnd Dopfx Adrjkr height 1000 mm total power requirement 0 kW weight of the machine ca. 700 kg dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 2000, length 800 mm width 1000 mm Dkjdpfsznndqjx Adror height 1300 mm total power requirement 0 kW weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1737/02, overall weight: 1,995 kg, This multi-chamber baling press compacts a wide variety of materials. This top-loading press is ideal for paper, plastic, metal cans, and plastic packaging. Dodpfx Adjzr Hxzerskr

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 105102558/89, overall weight: 750 kg, Continuously fillable compactor with rotating roller collects, shreds, and compacts waste using a special steel roller, which ensures a compaction ratio of up to 9:1. It compacts the waste through alternating left/right rotation of the special roller, which continuously applies pressure to the material being fed in. It enables continuous feeding – the compacted waste remains in a transparent PE bag. The compaction station can be installed directly at the point of waste generation within the premises. It is also ideal for continuous filling via chutes or conveyor belts and is easy to operate. CE standards Dsdjzr H Agopfx Adrjkr requires particularly little maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic clamping ensuring precise fixture of worked material, increasing cut accuracy and quality. This clamping is easy to assemble and operate. Technical data Dodpfx Aevxtcqodrokr Clamping length 3200 mm Material height 100 mm Actuators 4 Working pressure 2 bar Manufacturer: Cormak

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Dksdpfx Asv Aktnodrer Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Year of manufacture: 2017-2018