Used Address Printer for sale (3,861)

Condition: used, Year of construction: 2016, Media width: 610-3200mm, max. print width: 3200mm, max. borderless print width with Mesh Kit: 3200mm, min. media thickness: 0.2mm, max. roll weight: 100kg, max. roll diameter: 360mm, max. speed in Express mode: 75m²/h, max. speed in Production mode: 38m²/h, max. speed in Standard mode: 30m²/h, max. speed in High Quality mode: 23m²/h, max. speed in High Definition mode: 18m²/h, positive text quality: 4pt, negative text quality: 6pt, required footprint: 7700x3000mm, length: 5960mm, width: 1650mm, height: 1980mm, weight: 3.5t, an on-site inspection is possible. Tsdpfoz Eucxjx Aahjc

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours Tjdpfezlx E Tox Aahjc MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Tjdpfx Aoy Hmhhoahsc Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Todpfx Aajunaqvjhjc Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Two Keyence MK-G Inkjet Printers in good condition are for sale. Available: 1 black printer 1 white printer Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Todpfx Ajzh I Aajahec Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.

Condition: used, For sale is a professional Stratasys Objet30 V2 3D printer, manufactured in 2013. Technical specifications / features: * Manufacturer: Stratasys / Objet * Model: Objet30 V2 * Year of manufacture: 2013 * Printing technology: PolyJet * Build volume: approx. 294 × 192 × 148 mm * High level of detail and fine surface finish * Professional industrial-grade equipment * Original base frame on rollers Ideal for prototyping, product development, model making, design, and technical components. Used, condition appropriate for its age. Inspection possible by appointment. Todpfx Aaezwv E Iohjc Collection by the buyer. Subject to prior sale and errors.

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Tedpfx Ajwpkcnoahsc Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: AK26-015, number of ink cartridges: 8, total length: 4,400 mm, total width: 4,400 mm, total height: 1,820 mm, input voltage: 380 V, overall weight: 4,400 kg, product height (max.): 50 mm, Equipment: cooling unit, documentation/manual, Hybrid UV Inkjet printer for sheet and roll materials. Print resolution: 1200 dpi Modulation of the print droplet: Binary, Gray balance Number of colors: 6 colors - CMYK Lc Lm Additional white color that is printed before colored colors (underprint) Tedpfx Aaoqlahtohjc Drying of all colors using LED lamps Dot size on the printhead: 7-14-21 picoliters Maximum material thickness: 50 mm Maximum width of printing on plate materials: 3,500 mm The possibility of simultaneous printing of two plates next to each other Display table for receiving plate materials with a length of 2,200 mm Maximum print width on roll material: one roll 3,470 mm, two rolls next to each other 1,625 mm Maximum weight of material in a roll: 350 kg Maximum roll diameter: 350 mm Supports for two rolls of length 3,470 mm on the input and display

Condition: like new (used), functionality: fully functional, machine/vehicle number: D31369, Year of construction: 2019, operating hours: 73 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 355 mm, table length: 254 mm, construction height: 355 mm, --- RARE OPPORTUNITY --- Stratasys F370 for sale due to business closure. Barely used, with only 70 operating hours—essentially in like-new condition. This printer is ideal as an addition to existing machine parks or as a high-quality all-rounder for newcomers to 3D printing. The printer is currently packaged and in storage. It was inspected and serviced by the manufacturer’s authorized distributor prior to proper decommissioning. The most recent exported cfg file can be provided upon request. The F370 was designed with user-friendliness in mind, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide selection of materials for various 3D printing applications, typically including prototyping, the production of tools and fixtures, as well as low-volume manufacturing of end-use parts. Its compact footprint and quiet, safe operation—without requiring special arrangements—make the F370 ideal for workshops, offices, or even classroom environments. Tedpfx Aaoxgh U Tjhjc With soluble support material, even complex geometries with internal cavities can be created—uncommon in this class of printers. The four easily accessible material spool bays on the front (2x model & 2x support) allow for quick material changes. The complete package is rounded off by the GrabCAD Print and Insight design-to-print software applications, automatic calibration, an integrated camera for remote print job monitoring from your computer, and an intuitive front-panel interface.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement. Todpfx Asz A Sycoahec

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Todswhduuopfx Aahsc

Condition: excellent (used), Year of construction: 2018, The EFI VUTEk GS2000LX Pro is a production-level, hybrid rigid/roll-fed superwide inkjet printer engineered for high-definition point-of-purchase (POP) graphics, indoor signage, and industrial advertising. Utilizing advanced LED UV-curing technology, it balances high-throughput productivity with an eco-friendly design that handles heat-sensitive substrates seamlessly Excellent conditions, 8 colours + White Tjdpfx Aaez Dhnlehoc In production, demo possible Western Europe Installation and training available upon request For further technical specifications please refer to attached brochure

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Serie number D00794, operating hours: 9,230 h, Stratasys F370 3D printer Tsdpfx Aey N Dhqoahjc

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Todpfxez Dgfvs Aahec Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Voltage (2~/PE): 200–240 V Todpfx Aajy Szv Rshoc Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 560 h, Consumables worth €5,000 included! HP consumables, all sealed and in original packaging: 5 x 500ml fusing/detailing agent (~5 x €270 = €1,350) 12 x color agents (all colors, ~12 x €130 = €1,560) Tjdexm Uypepfx Aahsc 1 x color printhead kit (~€950) 1 x printhead kit (~€950) 1 x PA12 Powder We are selling our lightly used HP MJF-580 printer. The unit has exclusively been operated under a valid HP service contract. No contract is currently active. The printer is capable of producing parts in all colors. Collection is to be arranged by the buyer.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output. Todpfx Aaez Dudgshjc

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Tsdpfjz Dugnex Aahoc Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10356, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Tjdpfoz Duhrex Aahjc Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10368, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Todpfx Aoz Dudmoahec Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: good (used), Year of construction: 2019, The Durst Rho 312R is an industrial-grade, 3.2-meter roll-to-roll UV inkjet printer optimized for high-volume production of backlits, fine art prints, POP displays, and outdoor advertising. Manufacturing Year: 2019 Double side print option Tsdpfx Asz Hw Iaeahoc Colour configuration: 4 colors Mileage: 220.000m² only! In production Printhead status: some slots must be replaced Demo possible Location: Western Europe For further technical information please refer to attached brochure. Productivity & Speed • Maximum Output: Up to 240 m²/h to 274 m²/h in standard high-speed modes. • Boost Mode (Plus Variant): Up to 305 m²/h. • Production Mode: Roughly 128 m²/h to 130 m²/h. • Multi-Roll Printing: Supports simultaneous printing on two 1.6-meter rolls with independent queues

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand large-format printer, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x OCE Plot Wave 360 Meter readings: Total: approx. 7,261 pages Tsdpfsz Aq I Ujx Aahoc Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Tsdeux Sfzopfx Aahsc Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: good (used), Year of construction: 2020, functionality: fully functional, color channels: CMYK + White + Varnish, number of print heads: 12, total length: 3,200 mm, total width: 2,100 mm, space requirement length: 3,200 mm, space requirement width: 2,100 mm, Equipment: raster image processor, Ricoh Pro T7210 UV-LED Flatbed Printer for Sale Reliable and well-maintained UV-LED flatbed printer for demanding industrial production. Ricoh Pro T7210 UV-LED flatbed printer in good condition for sale. The machine is currently in daily production use. The printer is fully operational and has been regularly maintained. Prospective buyers are welcome to inspect the machine in a production environment and perform their own test prints prior to purchase. Technical Specifications Manufacturer: Ricoh Model: Pro T7210 Year of Manufacture: 2020 UV-LED printing technology 12 Ricoh MH54 industrial printheads CMYK + White + Varnish Print area: 2,100 × 3,200 mm Maximum material thickness: 110 mm Printing speed up to 115 m²/h 8-zone vacuum table Features White ink printing on transparent and colored materials Spot varnishing and special effects Multi-layer printing capability Energy-efficient UV-LED curing Designed for demanding industrial production environments Included in the Sale RIP software Production PC Complete ready-to-run package Condition Fully operational Tedpfxszbqgcj Aahjc Currently in daily production use Regularly maintained Test printing available Delivery Delivery terms: EXW (Incoterms® 2020), Veikkointie 9, FI-03100 Nummela, Finland. The buyer is responsible for dismantling, loading, transportation, and reinstallation of the machine. If required, we can recommend experienced partners for relocation and commissioning.

Condition: excellent (used), Year of construction: 2014, The EFI VUTEk GS3250LX Pro is an industrial-grade hybrid (flatbed and roll-fed) UV LED inkjet printer. It is designed for continuous production on both rigid substrates and flexible roll materials, bridging the gap between point-of-purchase (POP) quality and high-speed production. Manufacturing Year: 2014 Color configuration: Fast four (CMYK) + White Printheads: Seiko 12 picoliters Printhead status: Perfect (spare heads on stock) Spare spare parts and refurbished belt included In prodcution Demo possible Location: Western Europe For further technical details refer to enclosed data sheet Tsdpfsz Hw Tpox Aahjc Productivity & Speed • Up to Speed Mode (Fast-4, 600 dpi, no smoothing): Around 223 m²/hr (2,400 ft²/hr) or up to 60 standard 1.2 m x 2.4 m boards per hour. • Eight-Color Plus White Mode: Up to 111 m²/hr (1,200 ft²/hr) or roughly 32 boards per hour. • POP Quality Mode (600 dpi, 8-color, light smoothing): Approximately 84 m²/hr (900 ft²/hr). • Best Quality Mode (1,000 dpi, 8-color, heavy smoothing): Roughly 26 m²/hr (275 ft²/hr). • Continuous Board Production: Less than 5 seconds of gap time between rigid boards using its precision alignment fence