Used Alsthom Nua 160 H for sale (59,944)

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Lredpfx Ajz Sn R Rekmju Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), Year of construction: 2006, Introduction SUN No. 4 flexo colors from the bottom High Board Line (n. 2 printing units year 2006 - n. 2 printing units year 2016) Lodpfx Asy D Huvekmsru Vacuum transfer among the groups with belt and panel system HBL Transfer with vacuum transport year 2025 Max size 1200x1600 mm Available may 2027

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Motor specifications: Lrjdpfx Akoz Snubemeu • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible.

Condition: used, Year of construction: 2011, operating hours: 8,261 h, Equipment: all wheel drive, Stock No. 5797 Atlas 160 W mobile excavator with additional hydraulics ----* Manufacturer: Atlas * Type: 160W - Mobile excavator * Year of manufacture: 2011 * Power-shift transmission Lodpfszwbf Tex Akmjru * Color: Orange * Tires: 10.00 - / Twin tires * kW/HP: 105 kW / 143 HP * Deutz engine with 143 HP, water-cooled * 2-shell grab * Total operating hours recorded: approx. 8,261 hours * Hydraulic operating hours recorded: approx. 3,581 hours * Hydraulic connections for hammer and shears * 301-liter diesel tank * 180-liter hydraulic tank * 32-liter AdBlue tank * Air conditioning * Adjustable boom * 270-degree camera system * Rotating beacon * Max. km/h * Work lights * Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 2 VON HEIN 160 pipe saws Year of manufacture: 1995 and 1996 With chipping jaws Application: Cutting and chamfering Smallest diameter: 30 mm Largest diameter: 160 mm For PE, PP, and PVC pipes Also suitable for short lengths from 10 mm Lrodpsyxqlnsfx Akmsu Condition: Very good, the pipe saws are ready for use The saws are my property Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Condition: excellent (used), For sale: a used KSB ETABLOC-G 32-160/302.2 industrial centrifugal pump with a 3 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with visible signs of wear, paint chipping, and localized surface corrosion. The detailed condition of the unit is shown in the photos. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-160/302.2 Serial number: Flow rate: 4–29.3 m³/h Head: 36.3–23 m Rotational speed: 2900 rpm Year of manufacture: 1990 Pump weight: 42 kg Motor technical specifications: Manufacturer: KSB Ledpsz Snvtefx Akmeru Type: ZKA 100L2 Identification number: 0533496 Motor number: 585957 Power: 3 kW Power supply: three-phase Voltage: 380/660 V Current: 6.3/3.6 A Frequency: 50 Hz Rotational speed: 2860 rpm Protection class: IP54 Insulation class: B cos φ: 0.89

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Design: G11 Motor: Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Speed: 2880 rpm Ledpfxez Sn Aae Akmsru Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: like new (used), functionality: fully functional, type: HZOS 160/100/1200/D piston diameter: 160mm piston rod diameter: 100mm Lrjdpeyxqrbsfx Akmju stroke: 1200mm perm. Pressure: 250 bar

Condition: good (used), functionality: fully functional, overall weight: 85 kg, SUCTION UNIT PLYMOVENT EMK 1602-H Manufacturer: PLYMOVENT Lrjdst Dkytepfx Akmju Designation: EMK 1602-H Weight: approx. 85 kg Very good condition (see photos) Large castor wheels, 2 of which can be locked (simply operate with foot) Dimensions: Height 107 cm width 90 cm Depth 1100 cm Offer consists of 1 piece EMK1602-H General information: We are offering items here from various company liquidations, which we describe as well as possible and provide informative photos. Further information about the item cannot be provided. We offer the opportunity to view items on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. Unless expressly described, this offer is for second-hand goods. Items have been visually inspected and are in good condition. Please note the photos Functionality performed - result ok. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate Photos similar

Condition: excellent (used), Lowara FHE50-160/55P Centrifugal pump Lrodpfo Ad Rfyox Akmeu Unused, end suction centrifugal pump, 316 stainless impellers, suitable for pumping hot or cold mildly aggressive liquids, with 5.5Kw motor, 3Ph

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, ENGEL VC 1050/160 Tech – Clamping unit Clamping force: 1600 kN Opening stroke: 608 mm Ejector stroke: 150 mm Ejector force: 61 kN Lrjdjx Up T Nepfx Akmeu Screw diameter: 45 mm Max. swept volume: 342 cm³ Screw speed max: 290 r/min Screw speed max (current): 290 r/min Injection rate: 170 cm³/s Injection rate (increased): 134 cm³/s Specific injection pressure: 2403 bar Specific injection pressure (increased): 2404 bar Nozzle stroke: 350 mm Nozzle contact force: 67.2 kN Type: Horizontal Drive: Hydraulic hours: 53.000h

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,265 h, clamping force: 1,600 kN, screw diameter: 35 mm, overall weight: 8,700 kg, controller manufacturer: ENGEL, controller model: CC200, Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details. • Injection unit: 500 • L/D ratio: 20 • Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 102 kW • Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector: Central ejector • Hydraulic core pulls: 2 on moving platen Ljdjz Dgvzepfx Akmeru • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 8 control zones • Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b • Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm • Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits) • Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l • Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2 • Languages: Czech and German

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Ljdpfxszk A Ivs Akmoru Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Condition: used, Year of construction: 2021, operating hours: 4,995 h, functionality: unexamined, overall weight: 2,210 kg, fuel type: diesel, tank capacity: 450 l, power: 121 kW (164.51 HP), output frequency: 50 Hz, nominal power (apparent): 160 kVA, Himoinsa HFW-160 T5 Year of manufacture: 2021 Operating hours: 4,995 Power: 121 kW Fuel: Diesel Lrsdjw A Iixspfx Akmju Rated speed: 1,500 Tank capacity: 450 l (own oil line possible) Turbo needs to be repaired! Only used in seasonal operation.

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm Ledps Aawyiofx Akmsru 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 950 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,871 mm, fuel type: electric, mast type: triplex, construction height: 2,354 mm, fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 1,263 mm, drive type: Elektro, construction width: 1,270 mm, Reach truck Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tire type: Polyurethane Front tire condition: 100% Rear tire type: Polyurethane Rear tire condition: 100% Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: Factory refurbished in 2026 Lrsdpfx Akezxi Npsmou Battery year of manufacture: 2026 Description: Used machine, factory refurbished by Toyota, including new inspection and new acceptance certificate according to FEM (formerly UVV). Side shifter, 3rd valve, impulse control, full free lift, CE certificate.

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Ledpsx Sw Iiofx Akmjru Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 100 h, control type: CNC control, controller manufacturer: CADMAN TOUCH, bending force (max.): 1,600 t, working width: 12,000 mm, stroke length: 800 mm, distance between stands: 10,600 mm, operating speed: 9 mm/s, number of axes: 15, back gauge: 1,000 mm, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Lsdpfoygkuwsx Akmsru Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering Lrodpjq H D U Ejfx Akmju - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), functionality: fully functional, NC machine vice / HOMGE HPAQ - 160 MULTIPOWER -CLAMPING RANGE / 750mm -Jaw width 160mm -Overall height 220mm -Overall length 1100mm -Total weight approx. 120 KG Errors and omissions excepted. Lrjdpfx Aksz Hzatemsu

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: Ljdeh Rfcnjpfx Akmeru 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: excellent (used), Year of construction: 2005, Welcome. We offer the following: Temperature regulator – thermostat for injection molds – model HB THERM 160 U1 – series 4 Technical data: Manufacturer: HB - THERM Lrjdpfx Ajz Sk Dzskmou Type: HB - 160U1 Year of manufacture: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Year of construction: 1995, condition: excellent (used), 3 Sulzer MB 40-160/5 centrifugal pumps Flow rate: 32 m³/h Lrjdpfxjd Sybps Akmeu Head: 147 m Maximum temperature: 130°C Seal: Mechanical seal with barrier fluid Drive power: Siemens 22 kW Speed: 2950 rpm ! Price per unit !

Condition: good (used), Year of construction: 1991, Hydraulic horizontal straightening and bending press Ljdjcffzajpfx Akmeru Maximum pressing force: 160 t Manufacturer: MAE, Type: HY RI 160 RH, Year of manufacture: 1991. Further details can be found in the data sheets.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 49 kg, input voltage: 230 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 6/16-4M COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: HD 6/16-4M Power supply voltage [V]: 230 Discharge capacity [l/h]: 600 Operating pressure [bar]: 160 Connection power [kW]: 3.4 Weight [kg]: 49 Dimensions [mm]: 467 x 407 x 1010 Hose [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Lrsdpfey S S Nzox Akmou Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service