Used Asitrade Laminating Installation for sale (9,878)

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops Gsdpfxszf Nk Ts Akasug • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls Gusdpfxjwxdcts Akaog - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m² Gusdpfoz Ai Dnex Akaog

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: Guedpeyx Uy Aofx Akaeg • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: D0A361109, conveyor belt width: 635 mm, warranty duration: 6 months, total width: 2,210 mm, total length: 1,175 mm, total height: 1,380 mm, year of last overhaul: 2026, power: 1.5 kW (2.04 HP), overall weight: 350 kg, Rondo SKO 611 Combination Dough Sheeter as a stainless steel model with computer control – the professional dough sheeter for your bakery. The Rondo SKO 611 is a professional dough sheeter made of stainless steel, combining highest precision and ease of operation. Thanks to modern computer control, programs can be saved and recalled – ideal for croissants, puff pastry, pizza or bread dough. As a reliable bakery machine, it impresses with hygiene, comfort, durability and maximum efficiency in the bakery. Used machine – professionally refurbished Stainless steel model 6 months warranty* Features: + Mobile combination dough sheeter + With computer control & LCD/LED display + Suitable for all types of dough for sheeting and laminating + With automatic flour dispenser + With new felt and linen belts as well as new scrapers + All relevant parts have been re-felted + With drag net & ribbed mat for shaping dough pieces / rolls / breads + With long-rolling station at the bottom for all doughs for long rolling *excluding control / circuit board / display Gujdpfok E I Tmex Akaeg Technical data: Year of manufacture: 2010 Serial number: D0A361109 Belt width: 635 mm Roller width: 670 mm Roller gap: 0.3 to 45 mm Dimensions: Working position 2210 x 1175 x 1380 mm (W x D x H) Rest position 1600 x 1130 x 1700 mm (W x D x H) Connection values: 400 V - 50 Hz - 1.5 kW Fuse: 16A-CEE plug For an additional charge, the machine can be dismantled by bak-tec and reassembled on site for installation in the bakery.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, total height: 3,950 mm, total width: 6,691 mm, The complete packaging line is ready for immediate use. The Rovema MVP 280/400 (2011) was fully overhauled and rebuilt in 2022/2023 by DL Packaging and has seen only limited use since then. Available for type of packaging: Block bottom bag and Pillow bag. The packaging line consists of: Guedpezi Ebcofx Akaeg Product infeed conveyor Multihead weigher (10–1,000 g, up to 65 weighings/min) Rovema MVP 280/400 packaging machine (2011) Markem-Imaje printer Stand-up pouch device including 1 set of forming parts Format set for flat bags (250 mm) Discharge conveyor for finished bags Frame for stable, vibration-free installation of the multihead weigher: approx. 2800 × 2800 × 2200 (H) mm, made of painted steel, including stairs and handrails The machine is equipped with a Siemens S7 control system and operator interface and features a sealing system for heat-sealable packaging materials, including PP films as well as laminated films with a thickness of 50 to 100 µm. A complete packaging solution ready for immediate production use.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich panel construction Equipment: - Sink - Electric heater - Refrigerator Net: €9,151.26 / Gross: €10,890.00 Article number: BBC113372123.01 Technical data: • Brand: Blyss • Model: Comfort • Vehicle type: Site trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 210 x 230 cm • External dimensions (L x W x H): 542 x 222 x 290 cm • Permissible total weight: 1,300 kg • Unladen weight: 830 kg • Payload: 470 kg • Chassis: High loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Welded frame, hot-dip galvanized • V-drawbar • Chassis ALKO • Braked rubber spring axle • Ball coupling • Support wheel • Electrical system - 13-pin 12V connector • Downpipe supports with bracket - 4 pcs • Multiplex wood floor • Walls - 25mm sandwich panel, smooth laminate, RAL9016 color • Ventilation grilles - 2 pcs • Entrance door in the front wall • Entry step made of tread plate • Window in the rear wall with shutters • Socket • Switch box • 230V electrical installation • Double sockets - 3 pcs • Ceiling light - 1 pc • Table and benches for 4 people • Shelf above the window • Built-in refrigerator • Sanitary module (1.5-chamber stainless steel sink, faucet, 5 l boiler, 2 x 19 l canisters for clean and dirty water, soap dispenser, paper towel dispenser) • Clothes rail - 4 hooks • Curtain rod with fireproof curtain • Electric heater 2000W • Towing handles - 2 pcs _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! Gsdpfszy Dfzjx Akasug _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. Guedpfx Akszz Hfyeajg This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK 1650HG flute laminating machine is a fully automatic, high-performance laminating machine for the precise bonding of printed top sheets to corrugated board or cardboard. It was specifically developed for the production of high-quality packaging and impresses with its high production speed, exact sheet positioning, and reliable laminating quality. Thanks to state-of-the-art servo and PLC control, automatic sheet feeder, and intelligent positioning technology, the KMK 1650HG is ideal for packaging manufacturers who place the highest demands on quality, precision, and productivity. ### Highlights * Fully automatic flute laminating machine * High-precision servo positioning system * Suitable for large sheet formats up to 1,650 × 1,650 mm * Automatic high-performance feeder for top sheets * Uniform adhesive application thanks to stainless steel adhesive roller * Intelligent PLC and touchscreen control * High production output with maximum precision * Robust industrial design for continuous operation * Simple operation and short setup times ### Application Areas The machine is ideally suited for the production of: * Corrugated board packaging * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Display packaging * Presentation packaging * Packaging made of cardboard and corrugated board ### Technical Data * Maximum sheet format: 1,650 × 1,650 mm * Minimum sheet format: 380 × 350 mm * Top sheet: 120–500 g/m² * Bottom sheet: A, B, C, E, and F flute corrugated board, 4-ply corrugated board, and cardboard from 300 g/m² * Positioning accuracy: ±1 mm * Machine power: 25 kW Gusdozg E Tyjpfx Akaeg * Adhesives: White glue or starch glue * Machine dimensions (L × W × H): 15.5 × 2.6 × 2.4 m ### Standard Equipment * Automatic high-performance feeder * Automatic pre-stacking system * Servo-controlled positioning system * Stainless steel adhesive roller with uniform adhesive application * Water cooling of the cleaning roller * PLC control with touchscreen * Photoelectric sensors for precise sheet alignment * CE-compliant electrical control ### Optional Equipment * Side paper feed for particularly large and heavy bottom sheets ### Included in Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ On-site machine commissioning ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support even after installation ### Machine Type Fully automatic flute laminating machine for cardboard and corrugated board KMK 1650HG Flute Laminating Machine

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Model: SINTESY 4323 MPT Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Guedpozcpkcefx Akaog Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Tool magazine: 12 positions Extendable tables Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Godpfxoyqr Sxj Akajug

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction Gusdpfxsugpwnj Akaog No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2018, GENERAL TECHNICAL DATA: Performance • Maximum speed: up to 400 m/min • Speed dependent on material properties and slitting conditions Web & Dimensions Working width: 40 – 400 mm Maximum web width: 400 – 450 mm Roll Specifications Maximum unwind roll diameter: 520 mm Maximum rewind roll diameter: 520 mm Maximum roll weight: 100 kg Core diameters: • Unwinding: 76 mm (3”), adapter 120 mm • Rewinding: 76 mm (3”), adapter 120 mm Materials • Paper • Aluminium • Laminates • Flexible films • Material thickness: - Films: 30 – 100 µm Electrical Data Main supply: 3 × 400 V, 50 Hz Auxiliary voltage: 220 V AC / 24 V DC Installed power: approx. 8 kW Pneumatic Requirements • Air pressure: 6 bar Machine Features • Center winding system with contact rollers • Shaft winding system (expandable mandrels) • Reversible winding direction • Edge guiding system (FIFE with SE46C sensor) • Glue table with 2 independent clamping bars Cooling System • Electrical cabinet cooling: Water cooling (HÄWA) Noise Level • Sound level: < 75–80 dB Safety Guodeyx Dc Tjpfx Akasg • Floor scanner • Side protection fence

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Godpfjzqt Dnox Akajug Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Year of construction: 2018, condition: like new (used), GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC Gujdpencfuksfx Akaog  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609,6mm  Lattice proofing  manual knife box  Automatic Turret  2 x spindle

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers Gusdsztqrnspfx Akajg • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N Gsdpfxszcftge Akaeug • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Gedpfx Ajvw Uf Dekaoug Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: Guodpfxjx Hh A Hj Akaog • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation. Main Advantages of the Machine High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials. 5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades. Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels. Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability. Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit. Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels. Automatic blade lifting system – improves convenience and safety during setup. Construction and Technology The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy. The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications. High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes. Precision and Working Efficiency The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds. The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces. With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications. Standard Equipment Main motor 5.5 kW and scoring motor 1.1 kW Cutting unit with tilt and height adjustment Sliding table 3200 × 420 mm Crosscut fence and rip fence with precision adjustment Tilting upper blade guard Integrated dust extraction system with Ø100/80 mm outlets Blade angle and height indicators Complete technical documentation Technical Specifications Parameter Specification Main saw blade diameter / bore 350 / 30 mm Saw blade tilt range 0°–45° Main blade speed 2800 / 4000 / 4800 rpm Scoring blade diameter / bore 125 / 20 mm Gsdpfovuf Iqox Akajug Scoring blade speed 7500 rpm Work table dimensions 945 × 720 mm Sliding table dimensions 3200 × 420 mm Maximum cutting height 100 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3200 mm Dust extraction outlet under table Ø100 mm Dust extraction outlet on blade guard Ø80 mm Minimum air velocity 20 m/s Minimum air flow 565 m³/h Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 1.1 kW / 1.8 HP Weight 850 kg

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) Gsdpfxeynkwne Akajug • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 330 x 700 mm Gjdpfjzt H Rmox Akaeug Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: good (used), Year of construction: 2013, • Model: GM DC5V8-BXE • Year of Manufacture: 2013 • Web Width: 200 – 520 mm • Substrate Thickness: 20 – 200 microns • Machine Speed (Semi-Rotary): up to 55 m/min Unwind & Web Control • Unwind unit with max. 700 mm diameter • BST web guiding system with splice table • Touch screen control panel Printing & Surface Treatment • Servo-controlled flexographic printing unit • UV curing unit • Vetaphone corona treatment unit Finishing & Converting Modules • Laminating unit • Die-cutting unit, die plate size 50.8 – 520.7 mm Gsdpfx Aksx Hab Uoaeug • Magnetic cylinder: Z 200 • Semi-rotary die cutting • Slitting unit • Waste rewind up to 500 mm diameter • 2× rewind stations Integration • Pre-installed buffer system for Xeikon digital press (Ideal for inline or near-line workflow)

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Glass laminating oven with vacuum mat (bag oven), manufacturer SIMTECH (Belgium), Flexlam series – Glass Laminating Solutions. Manufacturer: SIMTECH (Belgium) Model: Flexlam Laminating Oven Electrical panel: Alfametal / Dynamics, Project No. 0467 Year of manufacture: December 2007 Power supply: 3 x 400V AC + PE, 50Hz Network: TN-S, Icc < 10kA Gujdpszqmhaofx Akajg Control panel: Allen-Bradley PanelView 300 Micro Controls: Cycle Start/Stop, Vacuum Start, Reset, Emergency Stop Vacuum system: Dedicated vacuum pump, vacuum mat/bag Signaling: Signal tower (End of Cycle / Alarm-Fault / In Process)

Condition: good (used), Year of construction: 2002, GALLUS T 180 S by Graficon 5-Color Flatbed Screen Printing Machine with Hot Foil and Die-Cutting Dear Sir or Madam, We are pleased to offer the following Gallus T 180 S by Graficon, a highly versatile narrow-web label printing and converting machine equipped with five flatbed screen-printing units, hot-foil capability, lamination, and flatbed die-cutting. The machine is currently installed at the owner’s production facility and is offered for sale due to the planned acquisition of a new machine. Additional photographs and production videos are available upon request. _____ Machine Summary Description Details Gujdjzmhkujpfx Akasg Manufacturer Gallus / Graficon Model T 180 S Year of manufacture Approx. 1992 Complete overhaul 2002 by Graficon Printing process Flatbed screen printing Number of printing units 5 Maximum web width 200 mm Maximum printing width 180 mm Current condition Installed in factory, described as being in good condition Availability Subject to final confirmation Selling price EUR 49,000 Delivery terms Loaded on truck / ex current location, subject to confirmation FGT condition rating ★★★★★☆☆☆ 7/10 – _____ Why This Machine Is Interesting The Gallus T 180 S is a specialized narrow-web production system designed for high-value labels and technical products requiring strong ink coverage, high opacity, and tactile effects. The five flatbed screen-printing units allow the production of applications such as: • High-opacity white printing • Pharmaceutical and cosmetic labels • Industrial and technical labels • Security labels • Special-effect and tactile coatings • Metallic and decorative labels • Premium wine and beverage labels • Heat-resistant and durable labels The additional hot-foil, embossing, laminating, and die-cutting equipment makes this machine suitable for the complete production of finished labels in one production line. A major advantage is the extensive overhaul carried out by Graficon in 2002, during which the machine was reportedly rebuilt to an “as-new” condition. The printing units were also upgraded with servo drives, improving register control and production stability.