Used Benalu Landliner 50 M³ for sale (85,432)

Condition: used, Year of construction: 2022, Technical specifications for the TZ 150 – 6.4 m S-Line model Usable working length: 6400 mm Njdpfx Abez Epd Ro Uolg Insertion depth: 1250 mm Maximum upper die opening: 220 mm Maximum bending capacity: 1.50 mm steel sheet (400 N/mm²) Bending angle / precision: max. 143° / ± 0.5° Bending speed: from 0° to 140° in 2.0 s from 140° to 0° in 1.9 s Depth gauge stroke: 5–1250 mm (5 + 1 stop unit) Depth gauge – tolerance range: ± 0.1 mm per series Electrical supply / protection: 400 V / 50 Hz, 20 A / 4.0 kW pump motor External dimensions / weight: L 7800 × W 2110 × H 1800 mm / approx. 5500 kg

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Nodpsvw S Rwjfx Ab Ujlg Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: used, maximum load weight: 30,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, BENALU Jumboliner Moving Floor Trailer 90.1 m³ * 90.1 cubic meters * SAF axles * 1st and 3rd axle liftable * Alloy rims * Air suspension * Pneumatic controls * Disc brakes * Sliding tarpaulin * Side protection tarpaulin * Smartboard * Double-wing rear door with swivel rod locking Nledpfxjy R Ipze Ab Uog * Access ladder and platform at the front wall * ABS connection * 2 x 7-pin power connectors * ISO air connections with red and yellow coupling heads * 21 boards * Service hatch on the front wall * Load pressure gauge * 1 x hydraulic connection on the front wall * 1 x hydraulic connection below between the landing gears Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. Some inaccuracies may result from data transmission issues between various platform providers. Therefore, all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information intended to initiate contract negotiations. The information provided here is non-binding and does not constitute guaranteed properties.

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet Nlodpszzd Tujfx Ab Ueg

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min Nsdpfxjzhxi Dj Ab Uolg spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Nodpfxsz Dn Ske Ab Uolg Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Year of construction: 2020, material thickness 0,5-50 mm material width 1500 mm feed 4 m/min Operating hours 900 h The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Nlsdpfjy S Diaox Ab Ujg possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm Nljdpfx Aey E Tv Ajb Uog change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: new, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Light BENALU SANH tipper * Aluminium chassis * Aluminium body * Pendulum tailgate, without grain slider, mud-tight * Pneumatic tailgate locking * SAF axles * 1st axle as SAF lift axle Nledexc Ad Uopfx Ab Ujg * Air suspension * Smartboard * Rotary slide valve * 4 LED additional spotlights * Gear support winches * Plastic toolbox * Superstructure painted in RAL 9006 * Unpainted chassis

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. Nlodpfszy N Nlsx Ab Uog - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2024, neu 2024 7306 prompt, Zwischenverkauf v Italien 11800 € 205.44 € 1 10700 € Njdpfxswiq Ans Ab Uelg 50 to horizontal verschiebbar 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm 2100 mm 720 kg 550 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Nledpfx Ajzb N T Ujb Uog Weight: approx. 1200 kg Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2001, Immediately available, free of encumbrances: Trumpf Truma Bend V 50 press brake Year of manufacture: 2001 Control system: Delem Pressing force: 50 tons Bending length: 1200 mm Working width: 1280 mm Stroke: 215 mm Complete cladding Nlsdoz En Nfepfx Ab Ujg Foot pedal operation Weight: 6 tons Price: EUR 8,750.00 plus VAT, ex works.

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Nledszq H Uajpfx Ab Ueg Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm 20 µm rust removal (m²/h): 13.9 20 µm oil contamination removal (m²/h): 15.3 20 µm paint / coating removal (m²/h): 10.5 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177

Condition: ready for operation (used), Year of construction: 2011, 5-AXIS Machining Center Brand: DMG MORI Type: DMU 50 Year: 2011 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 630 x 500 mm / 300 kg 13 kW spindle – 10,000 rpm 16-position tool changer 3D probe 3D quickset Tool probe Coolant gun Electronic handwheel Chip conveyor Specifications: Table surface 630 x 500 mm X-axis travel 500 mm Y-axis travel 420 mm Z-axis travel 400 mm Njdpfx Ajzgca Djb Uelg B-axis -5/+110° C-axis 360,000° Spindle speed 20 - 10,000 rpm Spindle power 13 KW Spindle taper SK 40 Rapid traverse XYZ 24 m/min Machine dimensions with chip conveyor 4670 x 2350 x H 2750 mm Approximate weight 4,680 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: DN855, Technical data: 1 Schmalz – Column-swiveling crane NL 50KG – Year of manufacture 2023 Payload at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for other tools) Overall height: approx. 3.75 m, extension: approx. 4.6 m, lower arm extension: approx. 3.2 m Lifting height: approx. 0.25 m – 2.2 m Base plate: approx. 50 x 50 cm Total weight approx. 300 kg including vacuum unit Connection to 400V, 16A, swiveling range 270° Crane is disassembled and packed on a pallet Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Nlodpfxszv Ekds Ab Uog Very good condition – almost new. See pictures Shipping via freight forwarder or collection by appointment

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Njdpfx Aoq Nn Hcjb Uolg Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Nedpjibwarjfx Ab Uslg Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit!

Condition: used, maximum load weight: 29,380 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2002, loading space length: 9,900 mm, loading space width: 2,430 mm, loading space height: 2,000 mm, loading space volume: 48 m³, Year of construction: 2002, Equipment: ABS, Stock no. 5792 Approx. 48m³ Benalu tipping semi-trailer with combination door / entirely made of aluminum / hydraulic cylinder leaking! ----* Manufacturer: Benalu * Type: SYY3WB Nljdozdm Tcspfx Ab Uog * First registration: 09/2002 * Gross vehicle weight: 35,000 kg * Unladen weight according to vehicle registration document: 5,620 kg * Payload: 29,380 kg * Axles: 3x BPW / disc brakes * Suspension: Air suspension with lifting and lowering function * Tires: 385/65 R 22.5 on steel rims * EBS Wabco * Color: Chassis and tipping body aluminum, natural, tarpaulin gray * Volume: approx. 48m³ (9.90m long x 2.43m wide x 2.00m high) * Combination door (hinged door and swing door) * 2 x grain discharge chutes * Roller tarpaulin with tensioning straps * Operating platform at the front with access ladder on the left * Tensioning bar construction * Individual fenders * Full-load supports * LED reversing lights * Shovel and broom holder * Foldable underrun protection Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Nlodpfoziz S Djx Ab Ueg Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: new, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2026, Equipment: ABS, BULKLINER S 9500 VI H2300 - 53.9 m³ - F5/C3 PUDF - JOST FIX * Side wall construction: smooth wall design with longitudinal hollow chamber profiles * Floor thickness (mm): 5 * Side wall thickness (mm): 3 * Universal door with double locking, upper crossbar * Door leaf in ribbed construction * Continuous welds on door inner side * Locking system: pneumatic * Grain slides right & left * Grain discharge Nedpfx Ajydgg Djb Ujlg * Hose to reduce dust generation * 2 shovel holders (external) * Rear access ladder, detachable * Fifth wheel coupling height loaded (mm): 1170 * Axle brand: JOST; wheel inset (mm) * 120 mm disc brakes * ABS/EBS system brand: EBS Wabco * EBS control: Smartboard ECAS Wabco electronic suspension management with Optiturn activated; WABCO TEBS E2+ * Automatic lowering during tipping operation * Quick exhaust valve for tipping operation * Axle configured as lift axle * Automatic control with start assist: forced lowering of the front lift axle * Tipping cylinder brand: Edbro * Tipping cylinder stroke (mm): 7100 * Tipping angle (°): 48 * Aluminium drop legs * Electrical connections: 24N24S + 15-pin * Round LED tail lights * 6 work lights * 1 toolbox * Tyres: 6 x 385 / 65 R 22.5 Bridgestone Regional * Steel wheels * TPMS device for monitoring tyre pressure and temperature * Electric rolling tarpaulin system Easy Tarp * Platform on front wall with access * Access ladders right and left * Tarpaulin colour: metallic grey (B1070 / B2070) - PVC 650 g/m² * Chassis colour: RAL 9005 * Body colour: RAL 9006

Condition: used, Year of construction: 2007, operating hours: 3,165 h, Internal vehicle number: G400183 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) * Vehicle number: G400183 Machine* Manufacturer: Wirtgen * Model/Type: W 50 DC * Machine type: Milling machine * Year of manufacture: 7 * Operating hours: 3,165 h Engine & Drive* Engine power: 90 kW * Fuel: Diesel * Transmission: Automatic Weights* Unladen weight: 7,800 kg * Operating weight: 7,800 kg * Front axle load: 2,960 kg * Rear axle load: 5,140 kg Equipment: * Conveyor belt: approx. 5.70 m Errors and omissions excepted. Nedpfx Abjz Dy Rls Uolg We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Njdpfx Aou Unh Iob Uslg Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² Nledsyzr Nmspfx Ab Uog • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Year of construction: 2001, 7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of manufacture: 2001 Control: OSP-U100L Spiral-circular interpolation Upper turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1, indexed Maximum turning diameter: 610 mm Minimum turning length Z1: 1,500 mm Swinging diameter: 610 mm Turning diameter over the cross slide: 580 mm Center distance approx.: 2,000 mm Tool holders: BT50 Driven tool holders BT50 = 40 - 3000 rpm ATC magazine 72 BT50 For turning: ≈ 36 Driven tool holders: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Maximum turning diameter: 380 mm Turning length Z2 = 1,045 mm Swinging diameter = 380 mm Tool holders: VDI40 Turret: 8 positions VDI40 Spindle: Speed range: 14 - 2800 rpm at 37 kW Chuck: D400 mm Spindle bore: 110 mm Spindle nose: A2-11 Torque approx.: 2,000 Nm Coolant system with 40 bar pressure New screen New panel Several BT50 tool holders Weight approx.: 20 tons Nedpsz D I Ifefx Ab Uslg Space requirement L/W/H: 8,000 x 3,500 x 3,500 mm 22926