Sheet metal folder

Thalmann TZ 150 6.4M

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Bedpey Tn N Hefx Af Ajdh

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter Bodpfx Aoxaa A Nsf Aodh total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Bdsdpfx Afexzr E Eo Aeh Lift height: 4.7 m Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Transport can be organized on request!

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm Bedpfx Asyk Dicsf Ajdh - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: used, Year of construction: 1987, total length: 7,100 mm, total width: 1,300 mm, total height: 1,300 mm, Colour: Green Empty weight: 4.000 kg Price: On request - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 301/405 - Drive system: Conventional - Folding machine model: Semi-automatic - Drive system: Hydraulic - Power [kW]: 2.2 - Bending direction: Upward bending - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6020 - Max. opening [mm]: 150 - Stop type: Manual - Angle adjustment: Manual - Max. bending angle [°]: 135 - Options: Long folding machine - Transport dimensions: 7100mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 4000kg Bdedpszrhtysfx Af Ash - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Bdsdpfjzhm Nfjx Af Ash Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2005, Hydraulic Swivel Bending Machine Manufacturer: TENSOL, Type: H200.60 Year of Manufacture: 2005 Technical Data Manufacturer: TENSOL Type: H200.60 Year of Manufacture: 2005 Usable Length: 6000 mm Capacity: 2 mm Motor Power: 7.5 kW Dimensions: approx. L 7.00 x W 1.60 x H 2.20 m plus hydraulic unit (1.1 x 0.7 m) Weight: approx. 8 tons Equipment • 2D graphics control • Automatic sheet thickness adjustment • Controlled rear stop, 1000 mm • Overhang 1050 mm • Automatic roller shear Bedpfjzumhhjx Af Ajdh • Bending rail 10 mm • Reinforcement rail 15 mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 6200 mm 1.5 mm 2 mm 1.5 mm 7 7 1130 mm 180 mm 915 mm 4 kW 7380 mm 1435 mm 1980 mm 3700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Bjdpfjyrhtbox Af Aedh Transport and commissioningat customers place on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 10 h, control type: CNC control, We are offering a near-new ERBEND D-SFA 4230 CNC folding machine on behalf of one of our customers. This machine has less than 10 operating hours and is in absolute mint condition. A unique opportunity to acquire a high-end CNC folding machine without long lead times. Technical Specifications: This servo-driven folding machine is built for precision, speed, and flexibility: Working length: 4200 mm Capacity steel (S235): 3 mm Capacity stainless steel: 2 mm Capacity aluminium: 4 mm Machine dimensions: 2200 x 6100 x 2300 mm Machine weight: 11,800 kg Positioning accuracy: ± 0.1 mm Thanks to the servo drives and ball screw system, the machine guarantees high precision and reliability. Configuration & Equipment This machine is fully equipped and ready for immediate production: CNC control (Erfold 3D) with full 2D/3D programming and simulation Double bending system (upward and downward bending for higher productivity) U-type back gauge (4200 mm) with pneumatic fingers Integrated suction cups for stable sheet positioning Complete segmented tooling set (top & bottom) 200 mm high upper tooling with pneumatic clamping Motorized CNC axis adjustments (A-B-D axes) Manual crowning system for optimal bending results Foot pedal with 3 functions + safety light guards Additionally equipped with motorized clamping beam and folding beam, ensuring fast and accurate processing Condition Less than 10 operating hours Fully operational and available for inspection under power No wear – in like-new condition Available immediately Applications / Industries This folding machine is ideal for: Sheet metal fabrication companies Roofing and façade cladding HVAC production Machinery and construction industry Interior and custom metalwork Both single-piece production and serial manufacturing The double bending capability combined with 3D CNC control makes it highly suitable for complex parts as well as efficient batch production. Why this machine? Like-new condition at a significant cost advantage No delivery time Fully equipped and production-ready Large working length (4200 mm) Proven ERBEND quality Interested or want to schedule a viewing? Bdodpsy Idp Eefx Af Aoh Contact us for more information or to see the machine in operation.

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps. Bdsdpfx Afjlwt Ade Ash