Used Biopress Production Line for sale (21,784)

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts Ppedpstryf Iofx Antot

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Ppedpow Ahg Refx Antet Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: excellent (used), functionality: fully functional, We offer the SELO GROEP / Selo Food Technology BV industrial processing line, designed for the preparation, thermal processing, cooling, and transfer of food products. This is a comprehensive, stainless-steel processing system that is ideal for facilities producing sauces, soups, stuffings, ready-to-eat meals, vegetable purees, semi-liquid products, and other items requiring cooking and cooling under controlled conditions. The line was designed as an integrated work system with platforms, process tanks, and product transport sections. This design helps streamline the production process, increase batch consistency, and reduce manual labor. The entire system is made of stainless steel, making it well-suited for food processing environments and facilitating easier hygiene maintenance. SELO lines are designed for a very wide range of products: from smooth sauces to sauces with chunks of ingredients, from classic recipes to premium and specialty variants. The systems are designed to maintain consistent quality, color, viscosity, texture, and flavor in every batch of product. Full process automation for cooked, pasteurized, and chilled products, with capacities ranging from 250 to 9,000 kg/h. A key advantage of the SELO line is its advanced mixing and homogenization systems, which help achieve a uniform structure and high product stability. It also offers the ability to run multiple recipes within a single intelligent system, along with a CIP-compatible design that supports food safety, compliance with hygiene requirements, and high line availability. The system includes, among other things: Kooktank 2 – cooking tank Koude saus tank – cold sauce tank Koeltank 3 – cooling tank Each tank has a capacity of 600 liters. A major advantage of this line is the ability to combine several process stages into a single production line—from product preparation and mixing, through cooking, to cooling and onward transfer to the next production stage. This type of solution improves workflow organization, increases control over process parameters, and allows for a more consistent final product. Key advantages of the SELO line industrial stainless steel processing line, integrated cooking and cooling sections, suitable for sauces, soups, fillings, and convenience products, process tanks with a capacity of 600 L, design with walkways and service access, Pedey Epk Tspfx Antopt solution for continuous operation in food processing plants, manufacturer Selo Food Technology BV, Netherlands. Technical data visible on line components Manufacturer: Selo Food Technology BV / SELO GROEP Year of manufacture: 2003 Tank types visible on the line: Kooktank 2 / Koude saus tank / Koeltank 3 Tank capacity: 600 liters Tank weight: 600 kg The SELO processing line is an excellent solution for companies seeking a used, comprehensive system for the preparation and processing of food products in an organized, efficient manner that meets the requirements of modern production.

Year of construction: 2024, condition: excellent (used), – Power – 3,5 kw – Managament – PLC Control Pedoyx E Haopfx Antspt – One Appointments Units – Run out table – 15 m ( Possibility of upgrade ) – Diameter of block – 300mm – Wire diameter range – 1.8 – 3.2 mm – 1550 N/mm2 – Ring diameter – 300 – 420 mm - possible another diameter of rings – Capacity – 52,5 m2/8h for mesh with next characteristics : Ring diameter 350 mm – 9 coils Wire diameter – 3 mm Mesh dimensions – 10 x 5 m – dimensions of mesh – 10x 5 m ( possibly longer ) depends on the weight of the final mesh – Power – 3,5 kw ( complete line ) – Number of workers – 1 per shift

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Ppjdpfjt Txfpsx Antst Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET Ppodpfx Ast Tw S Usntet DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. The units of the production line: Ppodpfxoy Exrps Antot 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are interested, we will send you a detailed description and data.

Condition: used, Year of construction: 2006, machine/vehicle number: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Comes with an additional linear tool magazine (120 positions), 2 four-axis machining heads for simultaneous processing (20kW), automatic loading and unloading tables. Optionally, a comprehensive tool package is available (tool holders, angle heads, profile heads). Currently the machine is in continuous use. The machine was purchased in 2024 after a complete overhaul. Since then, it has operated for 15 months on a single shift. Technical specifications: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The max. working length is achieved by multiple transfer of the part in the clamp. Spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Ppsdoyu Sn Uspfx Antjt Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 1: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 Spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 2: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 External magazine: - Magazine type: linear - Magazine capacity: 120 tools - Holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC: Siemens S7 Mobile control panel Control computer: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 The machine is in full working order and is currently in continuous production. For an additional charge, a comprehensive range of accessories is available: 8 angle heads, a package of 3 standard tool holders, and a package of 17 new arbors for heads.

Year of construction: 2008, condition: good (used), A complete line for the production and packaging of fruit and vegetable juices. The line consists of machines: fruit-vegetable pulp milling and production line (MEGA bunker hopper, MEGA 2012 rotary sieve, MEGA 2008 batching rung elevator, MEGA 2008 brush dripper, roller inspection conveyor- MEGA 2008, 2017 screw conveyor, pulp impeller pump, pulp tank, belt press-FLOTTWEG 2008, rinse water tank-FLOTTWEG 2008, juice cooling system- STM 2018), packaging line (triblock arrow-STM 2014, buffer tank STM 2014, bottle orientator STM 2013, capping machine STM 2013, HITACHI printer 2016, labelling machine 2018). We also have a second smaller bottling and packaging line for sale. Ppsdpfepqxvxex Antet

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Podpfsy Emrkex Antspt

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Psdpfeq Auhdsx Antspt Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Pallet production line by DREW-BET (KAROLEX) Operated by 3 people Capacity: up to ~200 pcs/hour Year of manufacture: 2013 – in very good condition Possibility of using uncut boards along the length, which significantly speeds up production. The line is equipped with two saws (longitudinal and cross-cut). The line includes: - Through-feed nailing machine - Longitudinal milling and trimming machine - Corner trimming machine - Transfer table - Cross-cut saw - Flipper/rotator - Stacker - Magazine Ppedey D Uchspfx Antst - Chain waste conveyor running under the entire line The entire line is fully functional and connected to power. Very quick dismantling and transport (fits on two trucks).

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), Year of construction: 2026, Centrefigual Gold concentrator Knelsn and Falcn type Ppodeytnqispfx Antet

Condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 180 kg, empty load weight: 150 kg, shovel volume: 1 m³, Year of construction: 2026, LK100 Laboratory Jaw Crusher - Stone crusher pilot scale crusher Podpfxsytnl Te Antjpt

Condition: new, power: 90 kW (122.37 HP), fuel type: electric, Year of construction: 2026, machine/vehicle number: B18002026002, Ball mill Ppjdpfx Aneytm I Tjtst

Operating hours: 200 h, condition: ready for operation (used), functionality: fully functional, Complete Equipment Sale for Cheese/Dairy Production 1 - 500 l/h ATA brand pasteurizer, three-phase 1 - Horizontal cheese press, capacity for 48 kg, 4-position 1 - 150 l ricotta vat, three-phase 2 - 300 l refrigeration cabinets with three levels of separation 1 - 220 l coagulation vat, three-phase 1 - 150 l coagulation vat 2 - Hand wash sinks 2 - Work tables 1 x 1.70 m 1 - Vacuum machine 40 - Stainless steel cheese curing racks 0.64 x 0.52 m 2 - Rack trolleys for racks Ppjdpfsy Rv Edex Antot 1 - Stainless steel table with shelves 0.6 x 1.45 m 1 - Table with sink and sliding doors 0.6 x 1.45 m 3 - 30 liter aluminum cans 2 - 50 liter aluminum cans 1 - Boot washer 1 - 600 liter refrigerated milk tank

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Pjdpfxjwv Trlj Antept Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a UC Matic 15 window manufacturing line as well as a Weinig Powermat 500, consisting of the following main components: Ppsdpfjx Sqxhsx Antst - Infeed automation - CNC machining center Unirex 2000 - CNC end-processing unit Unitec 15 - CNC longitudinal profiling machine Unicontrol 12 - Automatic double-part turn-over and return system - Outfeed buffer - Powermat 500 with automation The system is designed as an integrated production line for window and profile machining, enabling efficient and flexible manufacturing. The machinery will be dismantled by a specialized service provider. The costs for dismantling will be disclosed and are to be borne by the buyer.

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Pjdpfx Anoivur Ajtspt 70-meter painting line with friction system for loading multiple products in a small space (see video)

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Pedex D Dq Sjpfx Antopt Complete Production

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Ppjdpsyw Tmlefx Antjt Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding Pedpfjxmiirsx Antspt 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Year of construction: 2000, condition: used, machine/vehicle number: 1660, Production line for sandwich panels / Lewecke loading gantry The following product was manufactured on this system (alternative products possible): Sandwich elements / sandwich panels with a polystyrene core, aluminum outer layer 0.5 - 0.8 mm thick, inner layer made of hardboard/plywood 1.8 - 2.3 mm thick. Maximum dimensions: 2500 mm x 8000 mm Maximum total thickness: 30 mm Maximum weight: 50 kg The production line consists of: Pjdpfx Anjyztygjtopt 1. Conveyor belt 2. Roller press 3. Roller conveyor, infeed, panel turner 4. Roller conveyor, outfeed, panel turner 5. OMMA glue application machine (hot-melt), roller applicator HGS_H 327, year of manufacture 2020 6. Conveyor belt 7. Roller press 8. Gantry system + 2x staging areas for sheets / top layers, vacuum handling system L/W/H 20,000mm/8,000mm/4,000mm Alternatively, available together with a vertical panel buffer – see separate listing.

Condition: used, HESS RH500 1998r Podsyx Hx Ropfx Antept control panel 2 moulds hydraulics conveyor

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: Psdsyi Ezkjpfx Antept - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.