Used Bruderer Bsta 60 for sale (21,501)

Condition: excellent (used), Catalogue no. 6815 Gjdpfjztxbdsx Ahajuf TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs Gusdpfx Ahozr U Dxoasf - Maximum thickness of the workpiece: 210 mm * From above: - Pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * From below: - Adjustable rollers in the lower bed, 2 pcs - Motor: 4.4 kW - 2 types of feed speeds - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - Made in Germany - Used thickness planer, very good condition Net price: 12,900 PLN Net price: 3,071 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (The price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam Guedpfezr Ixcjx Ahaof - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Gjdpjzrk T Aofx Ahasuf Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm Godezhvaajpfx Ahaouf - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Guodpfx Ahsy H Aizsaef

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4BM geared motor with a 0.37 kW three-phase motor and an integrated 220 V AC electromagnetic brake. The unit is fully functional, tested, and ready for use. The geared motor is in good technical and visual condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4BM Motor power: 0.37 kW Power supply: 3×220Δ / 380Y V, 50 Hz Motor speed: 1380 rpm Output speed: 42 rpm Torque: 60 Nm Gedpeznnm Sjfx Ahaeuf Brake: 220 V AC Braking torque: 5 Nm Protection class: IP54 Insulation class: B Weight: 16.88 kg Mounting position: IM V1A Year of manufacture: 2002 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Guodpfx Ajznaq Nehaof Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Year of construction: 1992, condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Guodpjvdu Nvsfx Ahaef

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Gusdpfxev Tnyts Ahajf

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Handover: in its current condition as inspected -Note: Check the condition of the wheels -Heavy-duty transport wagon: Industrial trailer with single-axle steering -Beam spacing: 5860 mm / Height adjustable from 850 to 1255 mm -Load capacity: 11 t -Tires: 405/130-305 solid rubber dual tires -Overall dimensions: 7600 / 2000 / H 850 mm -Weight: 1080 kg Gujdpfjxuqp Aex Ahajf

Condition: good (used), container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm Guedjvt Rcdopfx Ahajf -Weight: 378 kg / 275 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary. Godpfx Ahswc Afhoaeuf

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, Gedpezlqkbjfx Ahaouf suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: good (used), Year of construction: 1969, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device Welding Rotating Device Type W05 -Drive motor: Gusdozd Rd Sspfx Ahaef -Load capacity: 9500 kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 395 mm -Rolling speed: 0.2 to 1.45 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 2770/1120/H560 mm / 2350/990/H560 mm -Weight: 2510 kg

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: Guodpfxsw Rdybo Ahajf • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: good (used), Quadruple steel holder Godpedcwzujfx Ahaouf Steel height: 60 mm Dimensions: L. 190 x W. 185 mm

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Godpfsynlraox Ahajuf Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Godpfxjvu Hrks Ahasuf Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw Gusdpfxsu Hav Ro Ahasf machine weight: 5600 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min Gedeu Hautspfx Ahaeuf table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Gujdpfeywpabex Ahaof Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Packaging machine L sealer

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 43,500 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 5, pallet spaces: 135 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 43,500 mm, support length: 2,700 mm, 5 rows of pallet racking (5 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. - 20 frames (RM3511 - RAL5019) - 40 base plates, shims, fastening materials - 80 floor anchors (ZZBA1210) - 60 single beams (T27114 - RAL2008) - 5 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to construction site / assembly location Gjdpjza R Ecefx Ahasuf - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire territory of the Federal Republic of Germany; except for islands! Deliveries to EU countries are made according to individual agreements.

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. Guodpfoiw Icbex Ahaof For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: Gedpferfucfox Ahaeuf 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.