Used Carton/Bottle-To-Case Or Bundle-To-Case for sale (18,882)

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 363 kg Lhsdpfxjzfn D Es An Ioi Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 680 kg Lsdszfl D Njpfx An Ishi Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2013, fuel type: diesel, Lifting capacity: 363 kg Please contact Gebrauchtgeräte Center for more information Lodpfxezflyqe An Iohi

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 363 kg Please contact Gebrauchtgeräte Center for more information Ljdozfkw Iopfx An Iehi

Condition: used, Year of construction: 2014, fuel type: diesel, Lifting capacity: 680 kg Ledpfx Anszfknas Iohi Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 454 kg Please contact Gebrauchtgeräte Center for more information Lhodpjzfkkhjfx An Ioi

Condition: used, maximum load weight: 32,150 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 09/2026, total width: 2,600 mm, total height: 3,900 mm, Year of construction: 2017, Equipment: ABS, According to our “General Terms and Conditions,” and subject to prior sale, errors, and omissions excepted, we can offer you today, without any guarantee or warranty until conclusion, the following vehicle: Schmitz Cargobull refrigerated trailer with 3 compartments (vehicle no. 985n) First registration: 19.05.2017 Gross vehicle weight: 42,000 kg Empty weight: 9,850 kg Payload: 32,150 kg Overall length: 14,000 mm Overall width: 2,600 mm Overall height: 3,900 mm Safety inspection (SP) valid until 03/2027, TÜV until 09/2026 Refrigeration unit: Carrier Vector 1950 MT, diesel/electric underfloor, 2 evaporators 6,436 diesel hours, 6 electric hours Temperature logger 2 internal compartments – one 1/3 and one 2/3, each with separate deep-freeze and fresh service capability, plus one in front 3 rows of continuous load securing rails on left and right Zepro tail lift, 3 tons, produced in 2016, mounted at the rear 2 x 12 ton dual-speed landing gears Schmitz disc brake 1st axle with lift Tyres 385/55R22.5: 1st axle approx. 90/90%, 2nd axle approx. 70/50%, 3rd axle approx. 80/80% 3rd axle steering Air suspension with raise & lower function 1 pair of LED work lights on landing gears 1 pair of LED work lights behind 3rd axle Lodeyrk Hkspfx An Iohi 2 x LED reversing lights Price: €17,000.00 (net) All information provided without guarantee or warranty. Our General Terms and Conditions apply. Place of jurisdiction for claims up to a dispute value of €10,000 is the District Court of Ludwigslust; for higher amounts, the Regional Court of Schwerin. Errors, omissions, and prior sale excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory Ledsyq H Iujpfx An Ishi ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: excellent (used), Year of construction: 2020, Complete forming to freezing line Excellent condition Upgrade your food production with our comprehensive burger, nuggets, and patties production line! From forming to IQF freezing, this line covers all stages with top-tier equipment from ALCO, JBT, and Schomaker. Watch to see our complete production line in action: Forming Machine: ALCO / JBT AFM 400 PC Breader: ALCO / JBT APN 400 Ljdjtykvhopfx An Iehi Battering Machine: ALCO / JBT ASC 400 Meatballs Machine: Schomaker-tec BRU 600-488 Shuttle Conveyor: Schomaker (400 to 600 mm transfer) Fryer: Schomaker Oil Management System: Schomaker Linear Oven: Schomaker Shuttle Conveyor: Schomaker (600 mm to 400 mm transfer) Key Features: High efficiency and precision Comprehensive solution from forming to freezing Advanced technology ensuring product quality Contact us for more information and inquiries:

Condition: like new (used), TECMA SEALED CUPS DUAL PACKER x2, x4, x6 PACK CARTON YOM 2013 AS NEW CONDITION Lodpoyrx Uvjfx An Iohi MADE IN FRANCE

Condition: new, mileage: 500 km, power: 70 kW (95.17 HP), fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2023, * CityRollup superstructure * All-aluminum body with Segemental roller doors * 2 compartments à 2,057 mm + 2 compartments à 1,320 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring ORTEN Electric-Trucks E 35 with roller shutter body: Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driving license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats 1+2 * Gear ratio rear axle i = 4.1 * Stabilizer rear axle * Front disc brakes * Rear drum brakes * Airbag driver * Fog lights * Heat-insulating glass * Luxury driver's seat * Central locking * Electrically adjustable exterior mirrors * Storage compartments left and right front doors * Multimedia 2DIN with USB connection * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chock with bracket (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color graphite black * Wheel rims color silver * Warning triangle * First aid kit * Hazard warning lights * Operating instructions Technical data of the conversion: * Maximum speed: 85km/h * Range: approx. 200km * Battery: Lithium iron phosphate (LFP) Nickel and cobalt free * Battery capacity: 80kWh, 400V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70kW / Peak 92 kW * Torque: 410Nm / Peak 730Nm Technical equipment: Regenerative braking power Lhjdoqz R Dmjpfx An Iei * 22kW On Board Charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS- CAN-BUS-controlled charging technology * Electric 5kW HV cab heater * Color display, shows all relevant battery, BMS, engine and control data * Diagnostic menu for engine control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * HV 400 Volt / DC battery heating system (only in charging mode) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup body Assembly dimensions: Total length: approx. 3,600 mm Floor inclination: 0 mm Total height: approx. 2,360 mm Width of the bay: front 2057 / rear 1320 mm Total width: approx. 2,200 mm Height of the bay: 1575 mm Aluminum roller doors: Roll-up with spring support. Rubber band for pulling down the roller doors. In the closed position, the doors are secured centrally by a locking handle, which is mounted on both sides of the front wall and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with aluminum planking with smooth surface. Paintwork: Body painted on the outside in RAL ? color. Lettering can be applied as specified at an extra charge Side steps: The side underride guard is formed by steps with an anti-slip surface for the driver. Steps along the bodywork on both sides of the vehicle, between the axles and behind the rear

Condition: used, mileage: 500 km, power: 250 kW (339.91 HP), first registration: 05/2024, fuel type: electric, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 36 m³, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * Orten SafeServer body * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Waste paper certificate * Chemistry certificate (IBC) * 4 rows of cargo securing rails * Lashing rings * 2,500 kg Bär tail lift * Reversing camera * Short cab * Leaf/air suspension * ABS Lodpfx Asulb Hmon Iehi * Spoiler * Sun visor * Air conditioning * Heated seat * Cruise control * 100% electric drive * 250 kW electric motor * Battery capacity 200 kWh * Charger DC/DC 15 Ah, AC/DC 22 kW * Luxury air driver's seat * Driver Performance Assist * Adaptive cruise control with FCW and AEBS-3 * Lane keeping assist * Glass sunroof Monthly rent: €3,200.00 + VAT Minimum rental period: 3 months From 12 months rental period and longer: €2,800.00 + VAT Incl. registration, tire wear, inspection, roadworthiness (TÜV), service, wear and tear Insurance must be arranged by the renter

Condition: used, mileage: 500 km, power: 250 kW (339.91 HP), first registration: 05/2024, fuel type: electric, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 36 m³, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * Orten SafeServer body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Waste paper certificate * Chemical certificate (IBC) * 4 rows of load securing rails Lsdpfx Ajulb Hyjn Ijhi * Lashing rings * 2,500 kg Bär tail lift * Reversing camera * Short cab * Leaf/air suspension * ABS * Spoiler * Sun visor * Air conditioning * Heated seat * Cruise control * 100% electric drive * 250 kW electric motor * Battery capacity 200 kWh * Charger DC/DC 15 Ah, AC/DC 22 kW * Luxury air driver's seat * Driver Performance Assist * Adaptive cruise control with FCW and AEBS-3 * Lane keeping assist * Glass sunroof Monthly rent €3,200.00 + VAT Minimum rental period 3 months. For 12 months or longer: €2,800.00 + VAT. Includes registration, tire wear, maintenance, MOT, service, and wear and tear. Insurance is the responsibility of the lessee.

Condition: new, functionality: fully functional, This original KUKA adapter cable is designed to convert connections from KRC4 controllers to be compatible with KRC2 controllers. It ensures reliable signal transmission and easy integration between different KUKA control generations. Specifications: Compatibility: KRC4 → KRC2 Controllers Function: Controller connection conversion (adapter) Ledsxc I S Depfx An Iohi Durable and long-lasting design Supplied with protective carrying case

Condition: used, maximum load weight: 23,065 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 08/2008, next inspection (TÜV): 02/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until final sale, errors, typos, and prior sale: Schmitz City Refrigerated Trailer (Vehicle 230) First registered: 08/30/2008 Type: SKO 20/LZG-13.4 FP 80/45 Permissible gross vehicle weight: 32,000 kg Unladen weight: 8,935 kg Payload: 23,065 kg Overall length: 13,550 mm Overall width: 2,600 mm Lhjdpjyygbbsfx An Ioi Overall height: 4,000 mm Internal length: 13,400 mm Internal width: 2,500 mm Internal height: 2,400 mm Type: Ferroplast 2 x lashing rails, one above the other, in each wall Tail lift: BÄR, 3,000 kg capacity, at the rear Refrigeration unit: Carrier Maxima 1300 5,279 operating hours Diesel Refrigeration unit 2 x 12-ton, 2-speed gear-driven winches Spare wheel holder Air suspension with new air springs in 2025 Air suspension with raising and lowering function Various minor damage from operation 2 x LED work lights, rear, on the sides + 2 x LED reversing lights Tires: 425/65R22.5, front approximately 40%, rear approximately 60/40% MOT (TÜV) valid until 02/, steerable axle Storage box, plastic Water tank Price: €3,250.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. Lhodsr Etuljpfx An Iei - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  Lhodpfsr D U I Djx An Ioi - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco Lhjdpsy Rdnaofx An Ioi With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Lsdpshu H Dpefx An Iohi Table Dimensions: 2000 x 1000 mm Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg

Year of construction: 2022, condition: ready for operation (used), A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible. Lsdpfx Asy Ax Ufen Ijhi

Year of construction: 2026, condition: new, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! The ORIGINAL made in AUSTRIA! VACUFORMER - vacuum presses - versatile, functional and economical! VACUFORMER Standard - The must have machine! Clamshell opening: work piece height approx. 500 mm Pressing surface LxW: 2920x1320mm Overall dimensions LxWxH: 3100x1400x1100mm Standard vacuum pump 40m³/h Equipment: Vacuum table with rubber membrane and membrane fast-change system • Fully welded, sturdy and robust steel construction • pressure up to 9 t/m² (-900 mbar rel.) Lhjdpfjf H S T Usx An Isi • analogue vacuum pressure gauge • mechanical vacuum pressure regulator • special, very tough Natural rubber membrane up to 130 °C, 690 % elongation, for wood and veneer pressing • robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm • extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) • incl. swivel castors • with intecrated forklift pockets • complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 1.25 kW Other dimensions on request! VACUFORMER L Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1540mm Overall dimensions LxWxH: 4100x1760x1400mm VACUFORMER XL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1780mm Overall dimensions LxWxH: 4100x2000x1400mm VACUFORMER XXL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x2250mm Overall dimensions LxWxH: 4100x2400x1400mm Vacuum pumps: 40m³/h, 80m³/h, 100m³/h, 140m³/h Standard for VERTICAL models: • Hinged control cabinet on the right side • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal • Siemens pressing timer with alarm • automatic pressing process UNIVERSALFORMERS Direct - Honest - Experienced

Condition: new, empty load weight: 604 kg, maximum load weight: 2,096 kg, overall weight: 2,700 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, loading space length: 4,052 mm, loading space width: 2,105 mm, total length: 5,556 mm, total width: 2,150 mm, suspension: other, tire size: 195/55 R10C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2025, TEMARED Car Transport Trailer Type Carkeeper 4021/2 2.7 t -- Modernized design, latest version -- Lhsdpfx Aox U Tnkjn Iei Available immediately! Financing possible! Delivery available for an extra charge! 2,700 kg gross weight, payload up to 2,096 kg, 100 km/h approval* Tilting platform, fully lined with phenolic plywood Brand new 2 years MOT upon initial registration, 2-year manufacturer's warranty Equipment: - Hot-dip galvanized welded steel frame - 18 mm phenolic plywood floor - Outer frame with lashing rail - 4 pairs of recessed lashing eyes in outer frame - Aluminium side panels, height 300 mm - Manual winch, 1135 kg - Platform tilting function via gas strut - Steel loading ramps stored under the platform, approx. 1300 mm x 300 mm - Loading angle: 6° - Maintenance-free, rubber-suspended KNOTT axles, 1350 kg each - 195/55 R10C tires on steel rims - Shock absorbers for 100 km/h approval - Plastic mudguards - Hot-dip galvanized V-drawbar - KNOTT overrun brake with reverse automatic function, handbrake - Automatic jockey wheel, 250 kg - 12V lighting system, 13-pin connector - Multi-function tail lights - Front marker lights - Side marker lights red (white at rear) - 2 wheel chocks with holders - Registration papers (vehicle registration document, COC) The above-mentioned equipment is included in the price. Dimensions: - Loading area: 4052 x 2105 mm (L x W) - Floor height: 530 mm - Overall length: 5556 mm - Overall width: 2150 mm - Overall height: 830 mm - Gross vehicle weight: 2700 kg - Unladen weight: from 604 kg - Payload: up to 2096 kg (depending on equipment) - Axle load: 2x 1350 kg - Drawbar load: 150 kg Trailer available immediately. Delivery possible at extra cost! Financing on request. Visit us or call us. Offer price incl. 19% VAT. Viewing Monday to Friday 09:00 - 17:00 Saturday 09:00 – 12:00 Offer and additional information available upon request. Subject to change, errors, printing mistakes, and prior sale. Some images may show optional accessories. *Please observe legal regulations regarding weight and speed limits.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. Lhjdpfx Anjya H S Se Ioi The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0720, Year of construction: 2015, overall weight: 370 kg, laser power: 200 W, travel distance Z-axis: 570 mm, laser source model: LS-PEC 200, A comprehensive service costing €5,000 was recently performed on the system by the manufacturer. The lamp, mirror, and cooling circuit pump were replaced. The system was initially used as an exhibit from 2015 to 2018. From 2020, the system was used at approximately 50% capacity, and from 2023, only one day per week! Ideal for toolmaking, repair, or die-casting part refurbishment! TECHNICAL DETAILS Laser type: Nd:YAG Laser source: LS-PEC 200 Average power max.: 200 W Pulse peak power: 9 kW Ledpfx Anozlqt Ne Iehi Pulse energy: max. 100 J Pulse duration: 0.4–20 ms Pulse frequency: 1–20 Hz (100 Hz) Focus diameter: 0.2–2.0 mm Positioning speed: 0.5–15 mm/s X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 570 mm MACHINE DETAILS Electrical connection data Mains voltage: 400 V Phases: 3 Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 950 x 1,550 x 1,250 mm Weight: 370 kg Total pulses: 56,527,413 EQUIPMENT Joystick control LED lighting Swivel device for the resonator to weld large molds Protective gas supply directly controlled via a solenoid valve Heavy-duty castors Laser resonator including resonator mechanics Laser rod Resonator cavity Resonator mirror Safety shutter Power supply including mains fuse Mains switch Emergency stop switch Motor protection switch Interface with hardware monitoring function Lamp switch Industrial controller Capacitor bank

Condition: new, Special forming tool Lhodpfx Aeiq Di Hon Ioi