Used Comall Joint Double for sale (12,710)

Condition: excellent (used), Year of construction: 2021, For sale is a used Hammer A3-41 surfacing and thicknessing machine with a surfacing length of 1800 mm. The machine has been inspected by our qualified personnel and is in very good condition. Technical specifications: - Silent Power spiral cutterhead - Planing width 410 mm - Surfacing length 1800 mm - Max. feed height 225 mm - Dust extraction connection Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2021 Godpfx Aoz Atbkskasug The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surfacing machine, thicknessing machine, planing machine, surfacing, thicknessing Reference: R-L0BHX

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Guedpozaqp Usfx Akasg Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Godpfx Akszdk Hysajug Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Condition: good (used), Year of construction: 2010, functionality: fully functional, cutting length (max.): 1,00,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. – Connection to window manufacturing software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC with Windows - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting Gujdpfx Akjz Adxgjaog - Crosscut - Automatic cutting - Connection to external software is possible (Orgadata, Unilink, Wiktop... etc.)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Welded frame - Folding side panels - 16x lashing eyes Net: €19,243.70 / Gross: €22,900.00 Article number: GDP335962235.01 Technical data: • Brand: Unsinn • Model: UD-3 9622-35-13 • Vehicle type: Turntable trailer • Vehicle condition: New vehicle • First registration: without first registration Gedpfezy Awvox Akajug • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 966 x 220 x 35 cm • External dimensions (LxWxH): 1,183 x 228 x 110 cm • Loading height of the floor: 70 cm • Permissible total weight: 3,500 kg • Tare weight: 1,460 kg • Payload: 2,040 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Hollow profile construction welded and completely hot-dip galvanized • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts removable • 3 axles, front 1500 kg, rear 2 x 1300 kg • Maintenance-free rubber spring axles • Insertion option at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extension • Stable recessed long lever locks • Made of multi-layered glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • 16 folding lashing eyes, mounted recessed in the floor frame profile (600 DaN/kg) • 16 lashing eyes under the loading area • Stable V-drawbar • Maintenance-free rubber spring axle from ALKO • Axle with continuous axle body and single-wheel suspension • Reverse automatic • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pin plug _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm Gedpfoy Spvfjx Akaoug 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Gusdpfx Akoztpbbeajg Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel Equipment: - 6 lashing points - Aluminum side panels - V-drawbar Net price: €2,613.45 / Gross price: €3,110.00 Article number: HAK225301535.01 Technical data: • Brand: Humbaur • Model: HA 253015 • Vehicle type: Box trailer • Vehicle condition: New Gusdpszy A Axsfx Akaeg • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 303 x 150 x 35 cm • External dimensions (LxWxH): 446 x 200 x 90 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,500 kg • Unladen weight: 387 kg • Payload: 2,113 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Silk-screen printed wooden floor, continuous without joints, non-slip and waterproof • Rear side panel folds down • Front side panel folds down • Long lever locks flush with the side panel • Continuous longitudinal beams • Frame completely hot-dip galvanized • V-drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel extensions, or front panel extensions • 6 lashing eyes inside on the side edge (certified 400 kg/dAN) • Maintenance-free rubber spring axle from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp opening Features: - 6 lashing eyes - Aluminum side walls - V-drawbar Net: €1,680.67 / Gross: €2,000.00 Article number: HAM113251330.01 Technical data: • Brand: Humbaur • Model: HA 132513 Gsdpfxjzy Dhvo Akaoug • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: Without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (LxWxH): 251 x 131 x 30 cm • External dimensions (LxWxH): 377 x 180 x 91 cm • Loading height of the floor: 53 cm • Permissible total weight: 1,300 kg • Unladen weight: 245 kg • Payload: 1,055 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Aluminum side walls, anodized, double-walled • Screen-printed wooden floor, continuous without joints, non-slip and waterproof • Rear side wall foldable • Front side wall fixed • Tensioning locks for the rear side wall • Continuous longitudinal supports • Frame galvanized • V-drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side wall extensions or front panel extensions • 6 lashing eyes inside on the side edge (certified 400kg/dAN) • Option to insert ramp boards • Maintenance-free rubber spring axle from ALKO • Wheel shock absorbers + 100km/h • Reversing automatic • ALKO overrun device and parking brake • 13-pin connector • Reversing lights • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel Equipment: - Aluminum sideboards - V-drawbar - 4x lashing eyes in the side edge Net: €1,000.00 / Gross: €1,190.00 Article number: HAK175211135.01 Technical data: • Brand: Humbaur • Model: HA 752111 • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: without initial registration • TÜV/HU (technical inspection): 3 years from initial registration • Internal dimensions (LxWxH): 205 x 110 x 35 cm • External dimensions (LxWxH): 302 x 155 x 86 cm • Loading height of the floor: 51 cm • Permissible total weight: 750 kg • Unladen weight: 140 kg • Payload: 610 kg • Chassis: Low-loader (wheels next to the body) • Tires: 145/80R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Aluminum sideboards, anodized, double-walled • Screen-printed plywood floor, continuous without a joint, non-slip and waterproof • Rear sideboard, foldable • Front sideboard, foldable • Long lever locks flush with the sideboard • Continuous longitudinal beams • Frame completely hot-dip galvanized • V-drawbar • Safety cable for unbraked trailers • Plastic mudguards • Insertion option at all 4 corners for tarpaulin frames, grid attachments, sideboard attachments or front panel extensions • 4 lashing eyes inside in the side edge (certified 400 kg/dAN) • Maintenance-free rubber spring axle from ALKO • 100 km/h manufacturer approval • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about any special requests! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years Guodezy A N Espfx Akajg - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Aluminum side panels - V-shaped drawbar - 4 lashing eyes on the side edge Net: €857.14 / Gross: €1,020.00 Article number: HAS175201030.01 Technical data: • Brand: Humbaur • Model: Startrailer • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (LxWxH): 205 x 109 x 30 cm • External dimensions (LxWxH): 297 x 154 x 80 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 136 kg • Payload: 614 kg • Chassis: Low-loader (wheels next to the body) • Tires: 145/80R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Aluminum side panels, anodized, double-walled • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Rear side panel foldable Gjdpszy Da Eofx Akaoug • Front side panel fixed • Rear tailgate with tension closures • Continuous longitudinal beams • V-shaped drawbar • Safety cable for unbraked trailers • Plastic mudguards • Option to attach at all 4 corners for tarpaulin frames, grid attachments, side panel extensions or front wall extensions • Pre-mounted fastening buttons for tarpaulin attachment on the side panels • 4 tie-down rings on the inside of the side panels • Maintenance-free rubber spring axle from ALKO • 100 km/h manufacturer approval • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel, off-road 185/70R13C tires, roof rails Equipment: - 6 lashing eyes - Aluminum side panels - V-shaped drawbar Net price: €1,983.19 / Gross price: €2,360.00 Article number: HAK113251340.01 Technical data: • Brand: Humbaur Guedpfxozy Af Tj Akaeg • Model: HA 132513 KV Offroad • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 251 x 131 x 40 cm • External dimensions (LxWxH): 379 x 185 x 97 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 270 kg • Payload: 1,030 kg • Chassis: Low-bed trailer (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Screen-printed wood floor, continuous without joints, non-slip and waterproof • Rear side panel folds down • Front side panel folds down • Long lever locks flush with the side panel • Continuous longitudinal beams • Frame completely hot-dip galvanized • V-shaped drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel extensions, or front panel extensions • 6 lashing brackets inside on the side edge (certified 400 kg/dAN) • Maintenance-free rubber spring axle from ALKO • Reverse automatic • ALKO overrun device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System Gujdpfxsyr Hk Sj Akajg year 2021

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel Gjdezy Aykopfx Akajug Equipment: - Aluminum side panels - V-drawbar - 4 lashing eyes in the side edge Net: €1,462.19 / Gross: €1,740.00 Article number: HAK110211135.01 Technical data: • Brand: Humbaur • Model: HA 102111 • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (LxWxH): 205 x 110 x 35 cm • External dimensions (LxWxH): 323 x 156 x 89 cm • Loading height of the floor: 53 cm • Permissible total weight: 1,000 kg • Unladen weight: 178 kg • Payload: 822 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/80R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Rear side panel can be folded down • Front side panel can be folded down • Long lever locks flush with the side panel • Continuous longitudinal beams • Frame completely hot-dip galvanized • V-drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, lattice attachments, side panel extensions or front panel extension • 4 lashing brackets inside in the side edge (certified 400 kg/dAN) • Maintenance-free rubber spring axle from ALKO • Reverse automatic • ALKO overrunning device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamp in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and Gusdpfjl Rix Nox Akaog strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Gujdpfx Aozz Adfjkasg Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: good (used), Year of construction: 1986, functionality: fully functional, Line for finger jointing (microjoints). The inverters in the control cabinets have been replaced with new ones. Gjdpfx Asynkzgjkajug

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Gsdpfouar Amjx Akaoug Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW Guodpfx Akjzxqtvsasg - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded Gujdjrrzklopfx Akajg ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 03250551610001, arm reach: 900 mm, type of input current: three-phase, load capacity: 5 kg, control cabinet width: 440 mm, control cabinet height: 290 mm, overall weight: 200 kg, input voltage: 400 V, protection type (IP code): IP54, repeat accuracy: 0.02 mm, controller model: MC-05 Controller, wire diameter (max.): 1.8 mm, input current: 32 A, pivoting range: 360 °, warranty duration: 24 months, welding current (max.): 500 A, teach pendant model: Teach Pendant Serie MC, Equipment: CE marking, documentation/manual, type plate available, COBOT WELDING CELL METALSELF CI-05 + AOTAI 500A (EX-DEMO FOR TRADE SHOW) Turnkey collaborative welding cell. Demo unit (2025), only 12 hours of operation. Excellent cosmetic and mechanical condition, like new. Plug&Play solution ideal for flexible automation of small/medium-sized batches. Guarantees maximum precision and easy programming without the need for specific certifications. SOLD WITH A 40% DISCOUNT ON THE LIST PRICE. COBOT SPECIFICATIONS (ROBOT ARM) -Model: Metalself CI-05, Reach/Payload: 900 mm / 5 kg Gjdjzw Nvmspfx Akaoug -Degrees of freedom: 6 axes (±180° range per joint) -Repeatability: ±0.02 mm -Protection / Weight: IP54 (industrial use) / 21.4 kg -Mobile magnetic base -Integrated transport trolley CONTROLLER & INTERFACE -Model: IIMT05-220/100 (220V, Single-phase power supply) -Programming: Color touchscreen Teach Pendant (IIMT-TP) -Connectivity: TCP/IP, Modbus-RTU/TCP, 16 DI/DO, 4 AI/AO AOTAI AMIG-500PSR GENERATOR: Top-of-the-line inverter with dual 32-bit ARM processor. -Processes: MIG/MAG, High-efficiency pulsed MIG -Power: 500A at 100% (Duty cycle at 40°C) for intensive use -Power supply: 380V, Three-phase -Wire feeder: Double closed loop, permanent magnet motor SOFTWARE & ADVANCED FUNCTIONS INCLUDED -Drag-to-Teach: Quick programming by manually guiding the arm -Weaving/Swing: Oscillation for vertical welds/fill welds with programmable dwell -Multi-layer & Array: Repetition of passes and matrix (grid) welding -Trajectories: Support for linear, circular, spline, and tube (saddle) paths SAFETY -Integrated collision detection and adjustable sensitivity -Parking brakes on all joints active when power is off -CE compliance (EN ISO 13849-1 PL d) SALE AND SHIPPING -Machine status: Ready for delivery, viewable and testable at our location in Settimo Torinese (Italy). -Warranty: 24 months. -Documentation: CE declaration, cobot manual, welding package manual, in any language. -Shipping: EXW (Ex Works). Packaging and transportation costs are borne by the buyer (can be quoted separately upon request).

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, Guedpfozzpaajx Akasg COMPLETELY OVERHAULED in 2024.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - 4 lashing eyes - accessory kit Net price: €903.36 / Gross price: €1,075.00 Article number: KEU275201035.02 Technical data: • Brand: TPV Trailers • Model: KD-EU2 Alu • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 202 x 108 x 35 cm • External dimensions (L x W x H): 296 x 152 x 89 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 124 kg • Payload: 626 kg • Chassis: Low-loader (wheels beside the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Side panels made of double-walled, anodized aluminum profiles • Round knobs for mounting nets or tarpaulins • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 12 mm thick, continuous without joints, non-slip and waterproof • Eccentric locks for the rear door • Galvanized V-drawbar • Plastic fenders • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments, etc. • 4 lashing eyes mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer approval • Can be easily parked upright • 13-pole plug • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ Gsdpozy Aywefx Akaeug - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair/workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100 km/h, Lowered chassis Equipment: - Welded frame - Edge for ramps - 12 lashing points Net: €5,525.21 / Gross: €6,575.00 Article number: AZH235502030.04 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 505 x 200 x 30 cm • External dimensions (L x W x H): 661 x 206 x 94 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,500 kg • Unladen weight: 764 kg • Payload: 2,736 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • New side wall hinges incl. welded-on hooks for attaching a cargo net, among other things. • Aluminum side walls with robustly installed latches • Aluminum side walls anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Option to insert at all 4 corners for tarpaulin frames, grating attachments, side wall attachments or front wall extension • Stable eccentric latches • Screen-printed wood floor, continuous without joints, non-slip and waterproof • Reinforced, bolted V-drawbar • Very stable steel frame welded Guedozu N E Njpfx Akaog • Frame completely hot-dip galvanized • Many cross members for high point loads • Additional longitudinal struts welded in continuously • All cross and longitudinal members lie on the ground • 12 lashing eyes recessed inside the side edge (1000 DaN/kg) TÜV certified! • U-profile on the rear for easier attachment of the ramps • Cargo net hooks on hinge parts • Parabolic axle from KNOTT • Shock absorbers for 100 km/h fitted • Parabolic axle for absolute driving comfort! • Reversing automatic • KNOTT overrun device and parking brake • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request specific options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: excellent (used), Catalog number: 8051 TECHNICAL DATA - max. blade diameter: 300mm - spindle diameter: 30mm - blade guards: 2 pcs - pneumatic cutting (blade movement: up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90°: 280mm - max. cutting length at 90°: 3020mm - cutting height at 90 degrees: 90mm - pneumatic clamps: 2 pcs Gujdpfszrwrfex Akaog - control pedal - material support - main motor: 2 x 2kW - dust extraction nozzle diameter: 2 x 60mm - dimensions (L/W/H): 3520x900x1450mm - weight approx. 500kg ADVANTAGES – unpainted – tilting sawing units – DTR documentation Net price: 15900 PLN Net price: 3790 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations) – used saw, very good condition