Used Concetti Ipf 25 for sale (15,250)

Condition: used, Year of construction: 1999, Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement. Njdpfx Akoz N Ha Eomjdc

Condition: used, Year of construction: 2020, operating hours: 288 h, functionality: fully functional, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, tank capacity: 25 l, total height: 1,025 mm, total width: 520 mm, total length: 1,135 mm, water tank capacity: 25 l, empty load weight: 40 kg, This used ride-on scrubber-dryer, model BD 43/25 C Bp Pack from Kärcher (year of manufacture: 2020 | operating hours: 288), has been technically refurbished and cosmetically restored in our in-house workshop. Among other things, new, maintenance-free gel batteries and new rubber squeegees have been installed. The disc brush has also been replaced. The suction bar has been sandblasted and powder-coated with a new finish. The dirty water tank lid has been replaced with a new one. The BD 43/25 C Bp Pack is ideally suited for economical basic and maintenance cleaning of areas up to 900 m². Due to its maneuverability and ease of handling, it is also perfectly suitable for cleaning areas with obstacles. Nodpfxs Aa Ncce Akmedc It is operated with a 24-volt battery, and a separate charger is included. The EASY-Operation system, with its characteristic yellow controls, ensures easy operation and very short learning times. Cleaning and maintenance work on the machine is equally easy to perform. Technical data: Working width, brushes: 430 mm Working width, suction: 750 mm Tank capacity, fresh/dirty water: 25/25 l Theoretical area performance: 1720 m²/h Practical area performance: 860 m²/h Permissible total weight: 115 kg

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,312 h, load capacity: 2,500 kg, lifting height: 5,450 mm, free lift: 1,750 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 625 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, tire condition: 95 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), total height: 2,480 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following technical specifications: · Operating hours: 3,312 · Lifting capacity: 2,500 kg · Lifting height: 5,450 mm · Overall height: 2,480 mm · Year of manufacture: 2016 Ndedpfxj Adny Io Akmec STILL 2.5-ton electric forklift with full cabin and heater, very good battery, tires in new condition, triplex mast with full free lift, side shifter, fork positioner, lighting, single-pedal operation, mini joystick, fork length 1,200 mm (other fork lengths available on request), charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). You can find more information and offers on our website!

Condition: used, machine/vehicle number: 008785, Max width workable: 800 mm Max length workable: 2300 mm Nedpjz S T Twsfx Akmjdc Max height workable: 200 mm Working capacity: 7 cicli/min

Condition: good (used), Dean Smith & Grace Type 25 x 120 Lathe Ndsdpfxoz S Adlo Akmoc Excellent condition. 120" between centres 25" swing DRO 3 Steadies included 4 Jaw Chuck

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Ndsdjx Twdyspfx Akmec

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 516321C00126, Year of construction: 2012, load capacity: 2,500 kg, lifting height: 4,250 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, power: 15 kW (20.39 HP), gearing type: automatic, battery voltage: 80 V, battery weight: 1,500 kg, overall weight: 4,500 kg, empty load weight: 2,950 kg, Equipment: 3rd hydraulic function, lighting, pallet forks, trailer coupling, We would be happy to prepare a financing lease offer for you. The device is in perfect technical and optical condition. Battery acid density is within the acceptable range. Includes charger. Ndods Aa Dzyspfx Akmoc Includes Aquamatik water filling tank. We can also carry out a new safety inspection, service, etc. Transportation can be arranged smoothly throughout Europe. No liability for errors.

Condition: used, machine/vehicle number: 008737, Overall length: 7200 mm Overall width: 1000 mm Njdsz Spaaspfx Akmsdc Loading compartment length: 6600 mm Loading compartment width: 330 mm Cutting shaft power: 5.5 KW

Condition: used, functionality: fully functional, Year of construction: 1982, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, pressing force: 90 t, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Njdpfxex Scv Es Akmodc Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,800 mm, total width: 3,500 mm, table load: 6,500 kg, overall weight: 16,400 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 24,000 W, product length (max.): 5,200 mm, number of axes: 4, This 4-axis ANAYAK CORREA XPERTA 25 was manufactured in 2015. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust table size of 2,800 × 1,000 mm and a maximum table load of 6,500 kg. If you are looking to get high-quality machining capabilities, consider the ANAYAK CORREA XPERTA 25 vertical machining centre we have for sale. Contact us for further details. • Table size: 2,800 × 1,000 mm • Spindle torque: 286 / 382 / 840 Nm • Rapid traverse X/Y/Z: 25 m/min • Universal indexed head: 2.5° Ndjdpfx Aksz I Rimomjc • Through-spindle coolant (CTS): 30 bar • Machine dimensions / footprint: 5,200 × 3,500 × 2,800 mm Additional equipment • Chip conveyor Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2003, Bahmüller Double Champion 25/36, ref. 3050 Year 2003 Nsdpfjz Iltmsx Akmsdc Model DLN 25/36 SG Processes two-part or single-part blanks Max. width: 3600 mm Max. height: 2500 mm Stitching speed: 850 staples per minute Suitable for 5 and 7-layer applications Includes gluing unit Stacker currently available

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. Ndjdpfx Akjv Eguyjmjc In very good working condition. Available: March / April 2025.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Nedpfx Aksz D Taajmsdc Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 13,167 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,580 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Ndedj Aat Rdjpfx Akmsc Side shifter, integrated 3rd valve

Condition: used, mileage: 4,30,000 km, power: 175 kW (237.93 HP), first registration: 04/2014, fuel type: diesel, overall weight: 13,500 kg, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Atego 1324 Registration: Mileage Air conditioning Euro 6 6-cylinder engine Tires: 70-80% tread Suspension: Leaf/air Payload: 5500 kg Body: Lamberet Length: 7.2 m Box with doors Refrigeration unit: Carrier Supra 750 Refrigeration capacity: down to -25°C Refrigeration unit: Only 3300 hours ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/.../... Roman We will gladly take care of your financing or leasing needs. EU sales: net price upon presentation of company documents and tax/VAT number. Nsdjzvk S Hepfx Akmjdc VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Ndodpfsz Nxx Tjx Akmec Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: reconditioned (used), functionality: fully functional, pillar drill for metal Nodpfx Asz Dp Aqskmedc

Condition: used, total length: 2,000 mm, total width: 1,600 mm, total height: 2,350 mm, Colour: White Ndjdpfx Aez R Dr Ujkmjc Empty weight: 3.000 kg - Drive system: Conventional - Model: vertical - Number of axes [pcs]: 3 - Power [kW]: 5.5 - Max. stroke [mm]: 250 - Max. reach [mm]: 365 - Table diameter [mm]: 500 - Table length [mm]: 500 - Table width [mm]: 500 - Table depth [mm]: 500 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 250 - Min. stroke speed [rpm]: 22 - Max. stroke speed [rpm]: 112 - Transport dimensions: 2000mm x 1600mm x 2350mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2011, Robust, Right-Sized Packaging System Automated machine for cardboard packaging, Cardboard cutting machine, Cardboard die-cutter, Cardboard manufacturing machine Packsize EM7-25 MT, year of manufacture 2011 Weight Ndedpfsz Ig E Rsx Akmec EM7-25: 4,500 lbs EM7-35: 5,500 lbs Footprint with Bales EM7-25: 15' 8" x 10' 2" EM7-35: 15' 8" x 13' 5" Unlimited number of cardboard sizes and styles 15’ 8″ x 13’ 5” Fully-loaded footprint Max. 4 plies of corrugated cardboard in various grammages The EM7-25™ is a patented, automated machine for the “On-Demand Packaging” process, designed for use in a wide range of industries. The EM7-25™ system, developed in Sweden, offers a range of advanced features for cardboard production, including longitudinal and transverse cutting, scoring, perforating, and die-cutting of handles and openings. The machine supports the “Lean Packaging” concept and also enables material feed in the reverse direction (so-called *Back-Feeding*), allowing for an unlimited variety of cardboard designs that are precisely tailored to the respective product dimensions. The EM7-25™ model can be seamlessly integrated into the PackNet.Server® software, which is used for production control and process optimization. This provides those responsible for the packaging process with the necessary tools and analysis data to efficiently coordinate and control both single and series production, as well as highly complex processes in the manufacture of corrugated cardboard packaging. A configurable user interface provides easy access to local reports on machine operation and is controlled via an integrated control panel.

Condition: used, tool diameter: 25 mm, drilling depth: 180 mm, actuation type: manual, rotational speed (max.): 1,510 rpm, table width: 390 mm, table length: 2,080 mm, Brand: Erlo Model: TC-25 (3 units) Transmission: Gear-driven Feed: Manual Capacity: 25 mm Drilling depth: 180 mm Morse taper: 3 Speeds: 8 (96 - 1510 rpm) Coolant system. Table dimensions: 2080x390 mm Ndjdpfx Ajy Av Ebjkmjc Minimum distance from drill chuck to table: 300 mm Maximum distance from drill chuck to table: 700 mm Drill with manual elevation. Drill elevation travel: 400 mm

Condition: good (used), Year of construction: 2007, For sale full packing system, Multihead ( 10 scales) Nedpfok R T Uvex Akmsdc Packing machine Conveyor for packaged products.

Condition: used, functionality: fully functional, machine/vehicle number: 100024953, Year of construction: 2001, operating hours: 4,455 h, load capacity: 2,500 kg, lifting height: 4,680 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,210 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: 100024953 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Nodpfey U R A Eox Akmedc Description: For sale is a Jungheinrich DFG 25 BS diesel forklift. The forklift is ready for use and fully functional. The visual condition is normal and the technical condition is good. The unit is available immediately. Fast and uncomplicated transport is possible upon agreement. Errors and prior sale are reserved. Sale is made without any warranty or guarantee. Fork, side shifter, 3rd valve, 4th valve, full cabin.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 2,126 h, load capacity: 2,500 kg, lifting height: 3,450 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,350 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic/dual pedal Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Ndjdpfx Ajz Sfrtekmsc Front tire condition: New Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: New Description: Handover with new maintenance & new FEM 4.004 inspection incl. inspection certificate. Like-new condition / incl. all original documents / operating manual / parts list / purchase invoice etc. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will gladly provide you with a quote for leasing & financing as well as delivery under favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing equipment from us. The stated operating hours were recorded at the time of the listing date. Subject to prior sale, changes and errors. Side shifter, integrated side shifter 3rd valve, work light rear, work light front, roof protection, windshield

Condition: used, Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor Nsdpeuz H Uvefx Akmsdc -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: IA 08 01 00 -Dimensions box: 100/75/H10 mm -Weight: 0.1 kg

Condition: used, Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor Nodpfxjuz H U Nj Akmsdc -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: B 12 01 04 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg