Used Counter 500 Hz for sale (24,124)

Condition: good (used), Year of construction: 2013, Hema BRSSF 500 P sourdough machine with control panel and dosing electronics. Bedez Hxk Ajpfx Af Aeln Year of manufacture: 2013 Power: 4 kW Capacity: up to 500 kg Dimensions: 110 x 130 cm, height 135 cm

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Bledpfx Afoz Ikq Ds Ajn Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Blodpezb Aktofx Af Ajn Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2015, Weima wood chipper - Quiet and low-speed - Excellent condition Year of manufacture: 07/2015 Only 92 operating hours Blodpfx Aoz Icb Iof Aon Type: WL 500 Engine power: 11 kW Feed opening: 500 x 745 mm V-rotor: 180 mm Rotor length: 500 mm Weight: 800 kg Number of knives: 28 Load-dependent push floor Compact design Feet on rubber vibration dampers Location: available from our warehouse in 54634 Bitburg - immediately available - Subject to prior sale.

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse Bsdpfx Ajza Eipof Asln - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Blsdpfx Ajy Iaa Tjf Asn Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vemag 500 filling robot for sale. Bedpfx Ajz Eh Tdof Aoln For more information or a video of the machine in operation, please contact me via email.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement Bjdpfx Afoyq Stvs Aoln

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Bledpozz Hf Hsfx Af Ajn Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Blsdpjx Adn Usfx Af Aon Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: good (used), Year of construction: 1980, Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Bedjz Hylbepfx Af Aoln Maximum turning diameter over compound slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm.

Condition: used, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 410 mm, cutting width (max.): 480 mm, control type: manual, roller diameter: 500 mm, pivoting range: 46 °, actuation type: electric, rotational speed (max.): 900 rpm, overall weight: 250 kg, table height: 850 mm, SAC BW 500 Band Saw For sale is a robust SAC BW 500 band saw for professional woodworking. The machine impresses with its solid construction and generously sized work table. The band saw table is made of gray cast iron, heavily ribbed, precisely planed, and adjustable in angle. The band saw features mechanical height adjustment, a blade tension indicator, and an upper precision band saw guide. The parallel fence can be used on both the left and right sides of the band saw blade. Features: - Manufacturer: SAC - Model: BW 500 - Wheel diameter: 500 mm - Cutting width: up to approx. 480 mm - Cutting height: up to approx. 410 mm - Table size: 550 x 700 mm - Table height: approx. 850 mm - Band saw length: approx. 4,100 mm - Blade dimensions: 25 x 4/10 mm - Wheel speed: 900 rpm - Motor power: 3 HP - Mechanical height adjustment - Blade tension indicator Blsdpsz Ig Rysfx Af Aon - Rubber tires - Adjustable gray cast iron table - Dust extraction port - Upper precision band saw guide - Telescopic guard - Motor protection switch with undervoltage release - Electrical system according to VDE 0113 - Parallel fence can be used on both sides The technical specifications correspond to the SAC product brochure for the BW 500. It describes, among other things, the solid gray cast iron construction of the wheels and the table, as well as the rubber tires for smooth and precise operation. sac_bw_de The machine is in used condition, with signs of wear consistent with its age. Ideal for carpenters, joiners, and woodworkers looking for a solid and durable band saw. Inspection and test run possible by arrangement.

Condition: used, Year of construction: 2018, Machine no. 6, serial no. 245127, control system, manufacturer Arburg Selogica, clamping force 500 kN, screw diameter 20 mm, handling system, manufacturer TecnoMatic, type micro cnc, on-machine dryer, manufacturer Piovan, type DPA20, conveying device, serial no. 5012216, year of manufacture 2017. Blodsz Hl Hdepfx Af Aen

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Blodpfxjyrqpfo Af Aen Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,000 h, Bystronic DNE1012FCCB – 500 Watt: a compact and reliable fiber laser cutting machine from Shenzhen DNE Laser (Bystronic Group). The machine is in very good technical condition, has few operating hours, and is ideal for the precise processing of smaller sheet metal formats. The system is available immediately and can be inspected and tested at any time after prior arrangement. Technical data: Bjdpfxsz Akqcs Af Asln • Power: 500 W fiber laser • Table dimensions: 800 mm * 1,100 mm • Working area: 600 mm * 1,000 mm • including extraction system • approx. 4,000 operating hours • Year of manufacture: 2017 • Connection value: AC 380V / 50Hz

Condition: used, functionality: fully functional, KLOCKNER 120x500 K-2WV Shredder/Chipper Inlet width: 520mm Inlet height: 180mm Shaft width: 520mm Shaft diameter: 400mm Number of knives: 2 pcs Screen dimensions: 100x100mm Bottom drive shaft with gear, shaft motor 2.2kW Top drive shaft with gear, shaft motor 2.2kW Feeder length: 4400mm Feeder belt width: 500mm Blodoz E U I Iepfx Af Ajn Feeder motor power: 1.4kW Main motor: 55kW

Condition: good (used), Year of construction: 1999, Maximum distance between centers 250 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle mount, DIN 55027 Size 6 Spindle speeds (2-speed, stepless) 1 - 650 / 1 - 2,500 rpm Feeds (X/Z) 5000 mm/min Rapid traverse (X/Z) 7 / 6 m/min Taper in quill MK 5 Quill stroke 160 mm Quill diameter 70 mm Drive power 16 kW Machine dimensions L x W x H 3200 (length without chip conveyor) x 1800 x 1400 mm Machine weight 3200 kg Accessories / Special features: • Cycle control: HEIDENHAIN Manual Plus o Color screen o The machine can be operated manually using electronic handwheels and a position display, or with o CNC 2-axis cycle control MANUAL PLUS o 2D simulation, fast and reliable control o RS 232 interface o Graphically supported, dialogue-based programming o A color screen displays the current axis positions with residual value display, as well as the input of cutting data, cutting speeds (also constant), target points (absolute & relative) with graphical cycle check and simulations. Pre-programmed work cycles for complex shapes with curves or chamfers, thread or grinding cycles according to DIN; threads (metric, multi-start, tapered threads), boring and grooving. • 3-jaw chuck, diameter 250 mm • Chip conveyor • Hardened and precision-ground bed guides, main spindle, gears and shafts • Chuck guard, electrically protected • Quick-change tool holder system „MULTIFIX“ Size C • Protective guard with safety device, laterally sliding • Manual tailstock • Coolant system • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Bsdpfx Asz Icrgef Ajln DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Bledpfxezz Hh Ue Af Ajn Weight: 60kg

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm Bsdpjz E H Hcofx Af Aeln blade speed: 2800 rpm CE marking 400 V safety clutch feeder length: 660 cm receiver length: 530 cm machine length: 90 cm year of manufacture: 2011

Condition: like new (used), Year of construction: 2012, operating hours: 5,323 h, DOOSAN DNM 500 MACHINING CENTER CNC DOOSAN – FANUC i Series MANUAL GUIDE ONLY 5,323 CUTTING HOURS! YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 1,200 mm x 540 mm TRAVELS: X: 1,020 mm Y: 540 mm Z: 510 mm SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL SPINDLE COOLING / HIGH PRESSURE TOOL CHANGER: 30 POSITIONS NEW MIST EXTRACTION UNIT / AIR FILTRATION SYSTEM, TOP-MOUNTED, LOSMA BRAND Bsdpfx Afsz Hyyro Asln CHIP CONVEYOR HIGH-PRESSURE PUMP WEIGHT: 7,000 KG COMPLETE DOCUMENTATION

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Bledpfjzur Hiox Af Aen Semi-automatic spiral binding machine from the German company RENZ: • Controlled by a touchscreen display • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm • Mobile, easy to move • Includes a receiving table • No special operator training required 230V power supply Weight: 550 kg

Year of construction: 2016, condition: used, overall weight: 16,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,200 mm, JUNKER JUPITER 500 – CNC Cylindrical Grinding Machine Plunge-Cut Method Technical Data: Workpiece diameter: 2–220 mm Workpiece length: max. 500 mm Corundum grinding wheel: 610 × 500 × 305 mm CBN grinding wheel: 500 × 500 × 305 mm Bedpfxsz E T Tpo Af Ajln Spindle drive: 37 kW Regulating wheel: 350 × 500 × 203 mm Regulating wheel speed: 1–800 rpm Regulating wheel drive: 11.5 kW Power: 81 kVA Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4500 x 2600 x 2200 mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: good (used), Year of construction: 2022, Keyence VL-500 measuring head, VL-570 control unit, VL-500 device base, VL-550 optical 3D coordinate system scanner. Used, from a business liquidation. First purchased 03/2022. Technical data and information according to the manufacturer: 3D coordinate system control unit VL-500 Device base Keyence VL-550 3D measuring head Keyence 570 Measuring accuracy: ± 10µm according to VDI/VDE 2634 Part 3 Standard measuring mode: 4 million measuring points Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Repeatability: 0.002mm Measuring accuracy: +- 0.01mm Max. workpiece weight: 50kg 3D scanner / laser scanner Bodpfoz H Sa Dsx Af Asln Without Keyence computer with Windows 11 and extensive evaluation software (GD&T) Without dongle Without monitor, keyboard and mouse Without manuals We recommend an inspection to avoid misunderstandings. Information without guarantee Information, details and technical data from the manufacturer. To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders Bodpfx Afey Tyy Do Aeln - steady

Condition: used, Year of construction: 2005, functionality: unexamined, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used slant-bed lathe, manufactured in 2005 by Trens in Slovakia (Type SBL 500 CNC). It features a 12-position turret with 6 driven stations and a Siemens Sinumerik 810D control system. An identical TSL 500, manufactured in 2006, is located at the same site in Düsseldorf. If you are looking for two identical machines for a manufacturing cell, you can acquire both together. TECHNICAL DATA - Year of manufacture: 2005 - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm Bedpfez H Ufvox Af Ajln - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-position, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, stocked - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. Therefore, we are selling it as-is, without any guarantee. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, with drilling and milling operations. LOCATION AND PROCEDURE The machine is located in Düsseldorf. Inspection is possible by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for local freight forwarders. Price on request. Please contact us via the contact form.