Used Crane Rope Ø 22 Mm 53 M for sale (1,16,384)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane Nsdpfxeyvr Huj Akmodc – Type: double-girder – Capacity: 2 x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition – Disassembled: yes, available immediately – Excluding rotating carousel

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor Ndodpfx Aozpw Dpskmec 12 tool holders, including 4 powered tool holders (2/2)

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Njdpfx Asy D Ngzskmsdc Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: good (used), Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm Ndsdsv Hmncjpfx Akmjc -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 280 mm -Weight: 83 kg/piece

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher ENGV-132SB-04M 5.0 kW 1440 rpm Ex protected -Volume flow rate: m³/h Nedpfx Akez Ru Uyjmodc -Connection: Inlet Ø 500 mm -Connection: Outlet Ø 500 mm -Fan wheel: Ø 510 x 220 mm -Dimensions: 1000/750/H1630 mm -Weight: 156 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Heating tape: Heating sleeve -Type: Ø 46 x 22 mm -Heating power: 220 W -Voltage: 230 V -Number: 9x heating tape available -Price: per piece Nodjlvykbspfx Akmedc -Dimensions: 180/130/H25 mm -Weight: 0.2 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, total height: 320 mm, total length: 8,775 mm, total width: 2,100 mm, load capacity: 2,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder Ndjdpfx Ajz N T Najkmoc – Capacity: 2,000 kg – Lifting height: 6 m – Year of manufacture: 1986 – Hoist type: wire rope hoist – FEM/ISO hoist: 3m Dimensions – Span: 8,775 mm centre-to-centre – Installation height: 320 mm – Width of wheel set excluding bumpers: 2,100 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm Speeds – Hoisting: 5/0.8 m/min (2 speeds) Features – Control: wired push-button control box – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but operational – Dismantled: yes, available immediately

Condition: used, Tool holder, milling holder, milling tool, adapter, clamping unit -Milling tool: Milling adapter ring set -Various sizes: see photos, more pictures can be sent -Dimension box .: 280/180 / H80 mm Ndodpjhcgi Defx Akmec -Weight: 3.3 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK50 cutter head chuck, 2 pieces -Type: various designs, see photos Ndsdpfx Aksvaxk Aemsc -Hole: Ø 22 mm -Price/Sale: complete -Dimensions each: Ø 97 x 175 mm -Weight: 11.6 kg

Condition: new, functionality: fully functional, Year of construction: 2025, 4 double-girder overhead cranes, in new condition rated load: 2 x 6.3 tons span: 16,560 mm lifting height: 6 m lifting speed: 5 and 0.8 m/min trolley travel speed: 2 - 20 m/min crane travel speed: 3.2 - 32 m/min radio-controlled remote control (tandem operation between the cranes) Ndedpfoz Hmgljx Akmec year of manufacture: 2025 voltage: 400V

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 95 mm / 16 teeth -Tooth width: mm -Shaft: Ø 60 mm -Dimensions: see photos Ndodexf Dqbspfx Akmsc -Number: 14x gear shaft available -Price: per piece -Dimensions total: Ø 95 x 243 mm -Weight: 6.4 kg/piece

Condition: used, chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate -Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate -Type: 55021/22-6 Ø 220 mm -Bolt circle: Ø 134 mm -Hole: Short taper 6, cone Ø 103 - 106 mm Ndedpstigxqsfx Akmec -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg

Condition: good (used), Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder Nedsb A Sx Hspfx Akmodc -Inner diameter: 55 mm -Outer diameter: Ø 110 mm -Width: 22 mm Price: per piece -Number: 12 available -Weight: 0.7 kg

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press Ndsdpfx Akopwnf Nomoc -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro Ndjdpfxsmn Ipue Akmoc 230 mm high 20 Euro 275 mm high 22 Euro 320 mm high 25 Euro

Condition: good (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft, 2 pieces -Gear: Diameter Ø 48 mm / 22 teeth -Tooth width: 10 mm -Shaft mount: Ø 18/16 mm / Ø 19/16 mm -Dimensions: see photo Ndodpfowq U Uksx Akmec -Shipping/Price: complete -Transport dimensions: 92/48/H70 mm -Total weight: 0.8 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder Njdpfxjxdk Abj Akmjdc -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm blade Ø: 350 mm Nodpfxsg Iihps Akmedc

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm blade Ø: 350 mm Nsdpfx Ajg Iih Njkmedc

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Ndodpfx Aksz Hd Eremjc Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!

Year of construction: 2000, condition: excellent (used), functionality: fully functional, 2 x 50 m³ aluminium silos with long support ring, ø 3,000 mm (plastic granulate silo) Capacity: approx. 50,000 litres Manufacturer: Eichholz Year of manufacture: 2000 Quantity: 2 Diameter: approx. 3,000 mm Cylindrical height: approx. 10,000 mm Total height: approx. 11,250 mm Weight: approx. 1,400 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: Ndodpfoxvtvzsx Akmjc On the top deck: 1 x roof edge guard rail (ø 3,000 x 1,250 mm) 2 x crane eyes 1 x manhole DN 600 with vent nozzle 1 x flange DN 100 (filling) 1 x flange for level indicator 1 x threaded socket 1 1/2" (full indicator) On the shell: 1 x filling line with pipe supports 1 x access door (approx. 850 x 1,850 mm) 1 x cable protection conduit 1 x threaded socket (1 1/2") for empty indicator Silo ends in a 60° cone with emergency shut-off slide valve. Otherwise as per photos

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 530 mm, overall weight: 46 kg, warranty duration: 12 months, HAKO CLEANSERV PE 53/1100 SINGLE DISC POLISHER Manufactured in 2019 The 530mm cleaning head is equipped with a pad holder and a medium-hard pad, allowing work on any surface. Easy pad pressure adjustment using a knob. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. A centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 530 Rotation speed (rpm/min): 1100 Power consumption (W): 1800 Weight (kg): 46 Cable length (m): 20 INCLUDED: 530mm pad holder with CenterLock mounting bracket 530mm cleaning pad - red 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. Ndsdpfx Aksztarksmec The large working width (530mm) ensures high surface coverage. The control panel is very easy to read and intuitive.

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8315-C -Recording: SK50 Nsdsu Ridxepfx Akmedc -Dimensions: Ø 330 x 260 mm -Weight: 36 kg

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine Nsdpfx Ajzq Tz Tekmsdc * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Aluminum storage silo with a long base ring, ø 3,000 Technical data / Dimensions Available quantity: 2 Volume: approx. 35,000 liters Container type: Silo Condition: used Food-grade: no Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,060 mm Cylindrical height: approx. 7,525 mm Overall height: approx. 8,785 mm Weight: approx. 1,800 kg Specific gravity of the medium: 0.60 t/m³ Operating pressure: Non-pressurized Wall thickness, bottom: approx. 4.0 mm Wall thickness, top: approx. 5.0 mm Ndjdpozy D Iijfx Akmjc Wall thickness, shell/cylinder: approx. 4 mm Operating temperature: 50°C Material / Properties Material, inner shell: Aluminum Material designation: AlMg3 Equipment Base design: Foot ring / base ring Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 60 degrees Top: 1 x Roof edge railing (height: approx. 1,200 mm) 1 x Self-closing door 2 x Crane eyes 1 x Manhole DN 600 with cover, ventilation slots and fall protection 1 x Flange DN 100 (level measurement) 1 x Flange DN 100 (filling) 1 x Threaded socket 1 1/2" (low-level indicator) 1 x Flange DN 250 Shell: 1 x Access door (approx. 1,400 x 850 mm) 1 x Filling line DN 100, terminating in a Storz coupling at the bottom 4 x Pipe supports for filling line 1 x Cable protection tube DN 50 1 x Threaded socket 1 1/2" for low-level indicator Bottom: 1 x Outlet DN 200 1 x Suction fitting The silo has a 60° cone. Notes: One of the silos has a single-rung access ladder with back protection (additional cost: €1,250) The currently connected or existing measuring and control technology will be included free of charge. However, no guarantee is given for its proper functioning. Documentation Drawing Container statics