Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 170 kg, total length: 705 mm, total width: 750 mm, total height: 1,800 mm, volume flow: 520 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 78 dB, type of cooling: air, Equipment: type plate available, Little-used compressor (90% used for blowing air) from a model-making business for sale: V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure, increasing performance and ensuring high efficiency. Tank with baked-on internal coating. 15-year warranty* on the tank against rust. Standard equipment includes all fittings: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain valve, and shut-off valve. Standard equipment includes rubber vibration dampers. Electrical connection 400 V/50 Hz (three-phase). Intercooler and aftercooler ensure rapid cooling of the generated compressed air. Prjdpfo Agwf Njx Airoc The low speed reduces vibrations, protects the compressor components, and reduces noise. Large fan impeller for optimum cooling. Easily accessible condensate drain under the tank. Also suitable for easy connection of a condensate drain line (Ecomat). Retrofitting of a refrigerant dryer is possible without any problems. Space-saving solution with a vertical tank. Technical data: Pressure: 10 bar Intake capacity: 660 l/min Speed: 1025 min-1 Tank volume: 270 l Weight: 170 kg Noise: 78 dB(A) Dimensions (W x D x H): 750x705x1800 mm Effective delivery rate: 520 l/min

Condition: repair required (used), Year of construction: 1996, operating hours: 444 h, Atlas Copco GA 7 Rotary Screw Compressor – 7.5 kW – Year of Manufacture: 1996 Sale on behalf of a customer! For sale is a used rotary screw compressor from the renowned manufacturer Atlas Copco, model GA 7, built in 1996. The compressor has been in storage for a very long time. For this reason, it is being sold as defective / for parts. Technical Specifications: • Manufacturer: Atlas Copco • Model: GA 7 • Year of manufacture: 1996 • Motor power: 7.5 kW • Max. pressure: 7.5 bar • Delivery rate: 1,140 l/min • Control system: Elektronikon II Prsdpfx Aie Adu H Usroc • Displayed operating hours: 444 h • Condition: Used Important note regarding operating hours: The original controller was replaced with a different unit. Therefore, the currently displayed 444 operating hours cannot be verified as the actual total runtime of the compressor. The actual total operating hours are unknown.

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 316.2 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Psdpfx Aioz Eqa Tjrsrc Year of manufacture: 2007 Serial number: 3705 Rated power: 25.0 kW Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h

Condition: excellent (used), Year of construction: 2024, Exhibition and demonstration unit New Kaeser Aircenter SM 16 – 10 bar screw compressor with integrated refrigeration dryer and compressed air tank Sigma Control 2 control system Year of manufacture: 2024 Operating hours: few Pressure: 7.5 bar Rated power: 9 kW Delivery rate: 1.61 m³/min Psdpfx Ais Agw Dmsrjrc Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Refrigeration dryer pressure dew point: +3°C Electrically controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 8 (5 to 13 bar) include controller Air Control Basic Year of construction: 2026 Operatin hours: 1 The compressor is new and unused. It has scratches on the outside. Technical specifications Type: Combi XP 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.17 to 1.43 m³/min Podpfx Aie Agv A Ajrerc at 6 bar (g): 0.17 to 1.35 m³/min at 7 bar (g) : 0.17 to 1.25 m³/min at 8 bar (g) : 0.17 to 1.16 m³/min at 9 bar (g) : 0.17 to 1.07 m³/min at 10 bar (g) : 0.17 to 0.98 m³/min at 11 bar (g) : 0.17 to 0.89 m³/min at 12 bar (g) : 0.16 to 0.83 m³/min at 13 bar (g) : 0.16 to 0.75 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/42-230 V / Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 350 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2028752, overall weight: 155 kg, power: 4 kW (5.44 HP), pressure (max.): 10 bar, noise level: 79 dB, Equipment: refrigerant dryer, type plate available, Due to company closure, for sale! SPECIAL PRICE! Pjdpfxoz Rt Tue Airjrc Aircraft 2-piston compressor, 400V, 9.6A, including refrigerant dryer. Fully functional. Self-collection only.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. Psdpez Ah Uxjfx Airjrc For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter Podsz Rmvcepfx Airorc forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW Pjdpfe Agr Ewox Airjrc - Motor speed: 3000 rpm - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial No.: AIF 042705 = Compressor 1 Serial No.: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Maximum air pressure in bar: 10 Both compressors have been serviced by the manufacturer according to the maintenance schedule (reports available). A stage replacement was carried out on both units after approximately 60,000 operating hours. The motor was also replaced on both compressors. The units are in good condition. Price: €4,900 per compressor Prsdpoz Rntiefx Airjc Inspection is possible and welcome. (93499 Zandt)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,275 h, functionality: fully functional, power: 4.7 kW (6.39 HP), fuel type: electric, volume flow: 125 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, Equipment: documentation/manual, type plate available, For sale is a used Kaeser SK 26 screw compressor from our company’s inventory. Manufacturer: Kaeser Type: SK 26 Year of manufacture: 2001 Operating hours: approx. 46,275 h Prjdpfxsz R I Smj Airoc Load hours: approx. 23,142 h Available from: December 2026 The compressor is currently in use at our facility and will be available from December 2026. The unit has been used and maintained regularly and is in used condition, commensurate with its age. The compressor is currently ready for operation. On-site inspection is possible after prior arrangement.

Condition: defective spare-parts repository (used), Year of construction: 2021, operating hours: 1 h, machine/vehicle number: 101780.0, Defective Kaeser Aircenter SX 6 – 11 bar rotary screw compressor with integrated refrigeration dryer with 200-liter air receiver Prjdpfx Aez Sz Tfsirsc with Sigma Control 2 controller with Kaeser F6KE filter incl. ECO-DRAIN with Kaeser F6KA activated carbon filter The compressor is functional, but the screw airend makes loud noises. Therefore, the system is sold as defective / for parts. Year of construction: 11/2021 Operating hours: 981 h Max. pressure: 11 bar Rated power: 4.0 kW Free air delivery (FAD) at 10 bar: 0.49 m³/min Sound level: 61 dB(A) Air outlet: 3/4" Air receiver: 200-liter capacity Pressure dew point (refrigeration dryer): + 3°C Condensate drain: level-controlled ECO-DRAIN Dimensions (L x W x H): 590 x 1090 x 1560 mm Weight: 290 kg Convenient leasing options available for new machines via our house bank. Visit our retail store. We always stock a large selection of new and used compressors!

Condition: excellent (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 1068, overall weight: 270 kg, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: type plate available, Kaeser Airtower 8 Screw Compressor (5.5 kW, 700 l/min) with Refrigeration Dryer /ct2499a/ Kaeser Airtower 8 screw compressor with refrigeration dryer for sale; serviced from new and in excellent condition. Manufacturer: Kaeser Airtower 8 + TU11 refrigeration dryer Serial number: 1068 Year of manufacture: 2000 Operating hours: 47,000 h Power: 5.5 kW Air delivery: 700 l/min (42 m³/h) Pressure: 10 bar Motor speed: 3000 rpm Rated voltage: 400 V, 3-phase, 50 Hz Rated current: 12 A Pipe connection: 3/4 inch Includes Kaeser automatic condensate drain and filter Overall dimensions: Length: 675 mm Width: 625 mm Height: 1285 mm Podpjz Er A Aefx Airorc Weight: 270 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 2,80,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel type: electric, Complete service history from Atlas Copco. Includes tank. Prjdps Afy Uaefx Airjc

Condition: like new (used), Year of construction: 2025, operating hours: 778 h, functionality: fully functional, machine/vehicle number: 4152034870, overall weight: 610 kg, fuel type: electric, pressure (max.): 10 bar, noise level: 73 dB, type of cooling: air, Equipment: documentation/manual, type plate available, | Manufacturer | Schneider Druckluft GmbH | | Model | AMG 37S MEAA | | Type | Screw compressor | | Year of manufacture | 2025 | Predoz Tcl Eopfx Airec | Product number | 4152034870 | | Motor power | 37 kW | | Power supply | 400 V / 50 Hz / 3 phases | | Operating pressure | 10 bar | | Maximum pressure | 10 bar | | Air flow rate* | 5,700 l/min or 5.70 m³/min | | Weight | 610 kg | | Dimensions (W × D × H)* | 1,330 × 830 × 1,555 mm | | Noise level | 73 dB(A) | | Air connection* | 1¼″ | | Maximum ambient temperature | 40 °C |

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ATLAS COPCO XAHS408 STAGE5 mobile compressor with an aftercooler, fully serviced. The machine comes with documentation for registration. Prodpfx Ao Ad E Hxoirsc Technical data: capacity: 24.0 m3/min; working pressure: 12 Bar; year of manufacture: 2020; engine: CUMMINS 187KW; operating hours: 971h; The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 245,000 PLN Gross price: 301,350 PLN The machine is in excellent condition. Links to videos are provided below.

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 120 mm, total width: 800 mm, power: 15 kW (20.39 HP), pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser SK25T screw compressor SIGMA Control 2 compressor control system Equipped with ABT25 refrigerant dryer Operating pressure: 11 bar Prodpfx Aj Afc Dkjiroc A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Podpfozt Sriox Airsrc Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: new, functionality: fully functional, overall weight: 205 kg, color: yellow, fuel type: gasoline, fuel tank capacity: 20 l, motor manufacturer: Honda, power: 15.5 kW (21.07 HP), volume flow: 1 m³/h, operating pressure: 15 bar, pressure (max.): 15 bar, type of cooling: air, mobility: mobile, Year of construction: 2026, Kaeser Mobilair M17 Construction Compressor incl. DLA (A) NEW Psdpfj Ad Iipex Airerc Kaeser Mobilair M17 Construction Compressor incl. DLA (A) – NEW | 1.0 m³/min Free Air Delivery | 15 bar Operating Pressure | Honda GX 630 Petrol Engine Technical Data: Manufacturer: Kaeser Model: Mobilair M17 Condition: NEW Operating Pressure: max. 15 bar Free Air Delivery: 1.0 m³/min Engine: Honda GX 630 petrol engine Engine output: 15.5 kW Tank capacity: 20 liters petrol Compressed air connection: 1 x G 1/2 Operating weight: 205 kg Transport frame: with carry handles Equipment: Compressed air aftercooler DLA (A) & condensate separator incl. connection hoses Starting system: Electric start Highlights & Features: - Compact high-pressure compressor for versatile construction site applications - Honda petrol engine – powerful & reliable - 15 bar operating pressure – ideal for specialized applications - Aftercooler & condensate separator – for dry compressed air - Transport frame with carry handles – easy handling - G 1/2 connection – compatible with standard compressed air systems - Made by Kaeser – proven quality & immediately available Areas of Application: ✓ Operation of high-pressure pneumatic tools ✓ Road and civil engineering ✓ Fiber optic expansion ✓ Municipal operations & maintenance ✓ Construction companies, landscaping & utility services ✓ Infrastructure & renovation projects Location: Depot at D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded More compressors & sizes available! ➡️ Mobile & stationary compressors, pneumatic tools, hoses & accessories Kaeser compressor for sale | Mobilair M 17 NEW | High-pressure compressor 15 bar | Compressor with Honda GX 630 | 1 m³/min free air delivery | Compressed air for construction sites | Kaeser compressed air technology | Compressor with aftercooler & condensate separator Your reliable partner for compressed air & construction equipment: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Contact us now & secure immediately available new equipment! If required, we are happy to offer a virtual inspection of the machine via video call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; engine: KUBOTA; Prodpfx Ajz Rxczsirec compressor in fully working condition. net price: PLN 57,500 gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: used, functionality: fully functional, power: 3 kW (4.08 HP), pressure (max.): 13 bar, Schneider Air Master AM D Plus Air Dryer DK-Smart with Schneider compressed air tank Year of manufacture: 2018, fully functional Inspection possible. Sale to the highest bidder. We also have other used machines available. Please contact us. Pjdpfx Aio Aaz Eiorjrc

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Prjdpfx Asz A Irusirsc Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Condition of the machine: Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Prsdpoz Sqa Uefx Airjc Electrical Connection: 400 V, 50 Hz, 3 Phases Country of Origin: Belgium

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Prodez Iy Nispfx Airec Tank design: hot-dip galvanized Price: €14,500.00 net €17,255.00 gross This is a used item. DESIGN Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, overall weight: 105 kg, power: 3 kW (4.08 HP), pressure (max.): 10 bar, ambient temperature (max.): 40 °C, Equipment: documentation/manual, type plate available, Atlas Copco GX4P EP screw compressor Operating pressure – 10 bar 2200 operating hours Prede Afc Nmjpfx Airjc A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.