Used Dc Inverter for sale (4,808)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Iedpfxog Ailce Adlotl Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 301599, Rampf DC-CNC Working area: 800x400x200 mm Number of components: 3 (see photos) 1 x Isocyanate 2 x Polyol Iedpfx Aozzb Hledlstl Temperature control unit Complete documentation available Details upon request.

Condition: good (used), Year of construction: 2015, Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter Itedjyhmf Uopfx Adlsl -Manufacturer: B&R, power supply module -Type: 80PS080X3.10-01 -Dimensions: 295/250/H70 mm -Weight: 3.5 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 10,000 mm, welding current at 60% duty cycle: 320 A, protection type (IP code): IP23, welding current (min.): 5 A, welding current (max.): 320 A, The uncomprimising entry into the professional world of pulse welding – for an unbeatable price Continuously variable welding inverter for MIG/MAG pusle arc welding Robust 4-roll wire feeder (encoder regulated) Customizable LCD Panel Higher Power with an upper limit of wire feeding speed from 18 to 22m/min Artificial Intelligence (AI) controlled smart pulse process Steel + Stainless Steel Pulse (Aluminium package can be bought afterwards) 380/400 Volt 30-320 AMP 60% 320 AMP Duty-Cycle (P323E) Including: OTC ARXIS P323E Water-cool unit Trolley PRO5000 4 Meter Welding Torch Earth cble 70mm² 5 Meter 10 Meter Interconnection hose 2 Years Warranty Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Isdpfxjzqz A Se Adlstl You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2011, 1 used welding machine Iodpfeh Nvfnjx Adljtl Manufacturer: Merkle Type: MobiARC 280 cel Year of manufacture: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding: Mains voltage: 400 V, Mains frequency: 50/60 Hz, Power consumption: 8.3/5.5 | 9.7/8.3 kW, Current consumption: 12/8 | 14/12 A, Maximum current: 21/16 A, cos φ: 0.98, SMAW welding: Electrode diameter: 1.5-6.0 mm Open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A GTAW welding: Open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, Welding current: 5-280 A, current at 60 %: 250 / 270 A, Insulation class: H, Protection class: IP23, Operating modes: SMAW, GTAW (DC), Cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17.5 kg

Condition: used, machine/vehicle number: M348, Used Automatic filling triblock + cap elevatorTechnical Specifications & Performance DataThis Automatic Triblock Rinser-Filler-Capper with Cap Elevator is a compact 3-in-1 monoblock engineered for high-quality glass bottle packaging in industrial environments. Designed around gravity filling, it preserves alcohol content and aromatic profiles for premium spirits and still wines. The triblock integrates a rotary rinser with 9 grippers, a 10-valve gravity filler, and a single-head AROL capping turret, delivering reliable performance within a small footprint—ideal for industrial packaging, beverage production, and integration into a used bottling line or second hand bottling equipment upgrade.Production speed: up to 1,600 bph (at 0.75L)Container type: glass bottlesBottle formats: currently set up for 0.25L; speed reference at 0.75L, 100ML ( Mignon), 187ML (Single-serve size), 1,5L (Low-profile).Bottle diameter range: 55–110 mmBottle height range: 160–320 mmClosure currently: GPI 28/400 (wooden/plastic screw style)Monoblock configuration: 9-gripper single-treatment rinser; 10-valve gravity filler; 1-head AROL capping turretRotation direction: clockwise (left to right)Electrical supply: 380 V, 50 Hz, 3Ph + N + T; auxiliary 24 V DC; IP55Installed power: 7.0 kWPneumatics: 6 bar operating pressure; 200 Nl/min; 1/4" fittingsRinser water pressure: max 3 barProduct connection: DN25 TriclampFilling valve OD: 14 mm; minimum bottle mouth: 18.5 mmConveyor: acetalic (POM) chain, pitch 38.1 mm, width 82.5 mm; support 100x100 mm closed sectionWorking height: 1,000 mm ± 50 mmMachine dimensions (L x W x H): approx. 4000 x 1500 x 2100 mmMachine weight: approx. 3500 kgMaterial construction: AISI 304 stainless steelEquipped with pivoting timing screws, which allow precise centering on the conveyor even for small-diameter bottles (e.g. 100 ml / miniature)Filler: Height adjustment via an adjustable central column (raising and lowering by means of an internal screw). Filling valves can be adapted or replaced according to the required height range.Rinser: Standard height handling up to approximately 150–180 mm. Capability to process shorter formats using grippers with inverted/reversed jaws.Advanced Automation & Control SystemsThe monoblock features a stainless steel electrical cabinet assembled to EN60439-1, CEI17-13/1, and EN60204-1 standards with fully sealed connectors and flame-retardant cabling. Machine speed is finely adjustable via a front-panel potentiometer. The rinser motor is inverter-controlled (400 V) for smooth operation. Level probes govern an electropneumatic product inlet valve with adjustable opening/closing to prevent hydraulic shock. A PLC-read... Isdpfx Adozrgqqslstl

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Single Motor Module from vertical lathe Scherer VDZ 80 DS -Type: 6SL3120-1TE24-5AA1 -Input: DC 600 V -Output: 3 AC 400 V 45 A -Dimensions: 500/150/H270 mm -Weight: 9.5 kg Itedpfx Adevuxn Reljl

Year of construction: 2017, condition: excellent (used), Pallet Changer. The concept of this is to provide totally hands-free pallet exchange and Premier have made constant improvements to this system over the last 10 years to make it the versatile unit it is today. A great number of Pallet Changers sold to date have been to the pharmaceutical industries and although it is the most expensive machine in Premier's inverter range, it has proved to be ideal in eliminating manual handling. Can handle loads up to 2050mm high, 1500 kgs weight. Floor fixed guards with photobeams at the front. Handles all conventional sized pallets. To totally avoid manual handling, two pallet stackers can be placed to the side of the Pallet Changer. Itsdep Am Shopfx Adlol

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Itsdpoulc Ixsfx Adlel Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display Itedpfxjzdtfls Adlel The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module, active line module -Manufacturer: Siemens, Sinamics Active Line Module from vertical lathe Scherer VDZ 80 DS -Type: 6SL3130-7TE23-6AA1 -Input: 3AC 380-480V - 50/60Hz -Output: DC 600V 60A 36kW -Dimensions: 500/150/H270 mm Itsdevuxp Ispfx Adlsl -Weight: 10.6 kg

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment Itodpfezzz Ivox Adlsl - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1210496, type of input current: three-phase, total height: 1,260 mm, total width: 441 mm, total length: 852 mm, input voltage: 400 V, type of cooling: water, welding power (max.): 35 kVA, Equipment: documentation/manual, We offer this used medium-duty PEI POINT BSP 136 INVERTER rocker arm spot welder FR, year of manufacture 2012. Manufacturer: PEI POINT Model: BSP 136 INVERTER Itsdpey Eyipjfx Adljl Year of manufacture: 2012 Condition: used Category Id: 905 Type Id: 1918 Type: MEDIUM-DUTY ROCKER ARM SPOT WELDER FR If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), functionality: fully functional, A very nice slitting and creasing machine is for sale. Brand: Duplo, model DC 615, with belt suction, 220 volts. Features a USB connector and LCD screen. You are welcome to test this machine at our location. Isdpfezyak Tex Adletl We can arrange transport and packaging for you and load it into a truck or container. Please inquire for a price including transport (within the Netherlands). Best regards, Henk Hoos

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). Iedpfx Aszw Uh Uedljtl -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: like new (used), functionality: fully functional, EWM acticARC Tetrix T352 AC/DC robotic TIG welding machine with cooling unit Very good condition Used very little Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. Iodpfezl Ac Aox Adletl In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping within Germany is possible for €100 gross. Shipping costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify the country, city, and postal code. Freight costs on request – please specify the delivery address.

Condition: used, PDF listing included! Extensive spare parts package – HOMAG / Homatic / Industrial Electronics For sale is a comprehensive collection of industrial and machine spare parts, primarily from the HOMAG / Homatic range, supplemented by components from Josting, Ferrocontrol, Heesemann/Kuhnke, Vero, Lenze, Brandt, Kuper and other manufacturers. The package comprises a total of over 500 individual items, offering an interesting selection of spare parts, modules and electronic components – particularly for the maintenance, repair and spare parts supply of older machines and control systems. Included are, among others: HOMAG / Homatic input and output cards PLC controllers and CPU cards PLC and program memory / EPROMs / flash modules Mini controllers and axis processors Servo and axis processors Frequency inverters / converters Encoder drivers Time and counter cards PC control units Control panels, keyboards and terminals VME bus and interface cards Power supplies and DC/DC converters Adapter and graphics modules various machine spare parts and circuit boards components from the Ferrocontrol / Josting range additional modules for HOMAG, Brandt and Heesemann machines The collection is particularly interesting due to the large number of different modules and the partially multiple availability of spare parts. It also includes many older or currently difficult-to-source components, which may be of interest for the repair and continued operation of the corresponding machines. Some of the included part numbers / modules: HOMAG / Homatic 2-083-01-5403/04 – 16 × 24 V output card 2-083-01-5406 – Homatic 16 × 24 V output card 2-083-01-5407 – 24 V NPN HC020 FET output card 2-083-01-5408 – 16 × 24 V output card Isdpfezw N Sbex Adlstl 2-083-01-5101 – 16E 24 V input card 2-083-01-5105 – 32 × 24 V input card, PNP 2-083-01-5423 – Input/Output card HC010 2-083-01-5004 – CPU transfer RAM / auxiliary memory 2-083-01-6902 – PC control unit 2-083-02-7006 – Axis processor 6809 2-083-02-7010 – Encoder driver 2-083-02-7420 / 7421 – Conversion processors 2-083-02-8000 – Axis processor for 6 axes 2-083-02-8068 – Servo 4-axis 2-083-03-0046 – CPU30 E16-103 2-083-03-0202 – SECO 6×RS232 VME bus and numerous other Homatic modules and control components. Josting / Ferrocontrol Input-80 0990 0741 – Input cards Output-80T 09900762 – Output cards Ferrocontrol ORE-80 circuit boards E² PRGR 0990 0591 EFR 0990690 other control and electronics modules Heesemann / Kuhnke various input and output cards Delay cards CPU cards Power supplies and other machine components Power supplies / power units Vero Monovolt PK60 Vero Trivolt HOMAG / Homatic 5 V / 12 A or 20 A power supplies Schroff Switchpac-Triple power supplies Condition The parts come from an extensive spare parts stock. The condition and functionality may vary depending on the item. A complete technical inspection of all individual parts has not been carried out. The existing list with 513 items can be provided upon request. Due to the large quantity, the collection is preferably offered as a complete package. If you are seriously interested, further information, photos and the complete item list can be provided.

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: Ijdpjzgtyhefx Adlotl 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Itedpfeyc Idbox Adlel Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: like new (used), Year of construction: 2018, functionality: fully functional, A used industrial machine for the production of cotton pads, manufactured by Strema in 2018, is for sale. The machine is in excellent condition, with minimal operating hours (it has been used very little and was only operated occasionally). Ijdpfxozhlv De Adletl

Condition: new, functionality: fully functional, VACON Danfoss AC Drive NXI01405-A0T0CSS-A1AFA50000+FL23+DLDE 75kW 400V Common DC Bus Inverter Unit Core Drive Specifications Iodpfx Ajy Ud Arsdljtl NXI: NX Inverter Unit. Operates on a common DC bus system. 0140: 140 Amps Nominal Current Rating.Heavy Duty (High Overload): 105 A continuous output (75 kW / 100 HP motor rating). Continuous/Low Overload: 140 A continuous output (90 kW / 125 HP motor rating). 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid integration (465 V to 800 V DC bus input). A: Includes the Standard Alpha-numeric Control Keypad. 0: IP00 Enclosure Class. This is an open-chassis module designed strictly for mounting inside a clean, protective industrial control cabinet. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper unit. C: Physical frame generation / module sizing designated as Frame FR8. S: Standard Air-Cooled system. S: Standard/Uncoated Circuit Boards (unlike your previous 'V' variant, this module relies on the external cabinet enclosure for environmental protection). Internal Expansion Board Configuration (A1AFA50000) The slot mapping outlines the factory-installed I/O and communication boards: Slot A (A1): OPT-A1 Basic I/O Board. Standard logic board providing 6 digital inputs, 1 digital output, 2 analog inputs, and 1 analog output. Slot B (AF): OPT-AF Dual Relay Output Board. Adds 2 programmable changeover relay outputs (NO/NC). Slot C (A5): OPT-A5 Encoder Board. A specialized card providing an interface for a digital encoder/pulse generator (typically 5V or 15V), enabling precise closed-loop speed and torque motor control. Slots D & E (0000): Remaining expansion slots are left empty for future modifications. Factory Plus Codes (+FL23+DLDE) These additions dictate specific firmware, testing, or documentation criteria: +FL23: Specifies a customized factory application software loadout or programming setting tailored to a specific automation configuration. +DLDE: German language and documentation pack (typically dictates the physical manuals, labeling, or software default language region). Brand new never used. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 operator panel • Control system: SIEMENS PLC S7-1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic pallet height detection • Clamp for attaching film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting turntable speed from 5 to 15 rpm • Frequency inverter for adjusting film carriage speed • Powerstretch 250% • Film welding with hot pad counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling conveyor at turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer roll diameter: 250 mm Powered roller conveyor for outfeed, with double sprockets, frequency controlled Length: 1470 mm Usable width: 1000 mm Height: 500 mm Roller diameter: 89 mm Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2200 mm with access door, Itodpfx Aewxrh Dedlol dual-channel safety magnetic sensor integrated in safety control

Condition: like new (used), functionality: fully functional, overall weight: 130 kg, USED WELDER INVERTER MULTIPROCESS 520A, MIG/MAG-TIG-MMA, CEBORA KINGSTAR 520 TS. Itsdozxwy Njpfx Adlsl

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 185, turning diameter over cross slide: 800 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning diameter over bed slide: 1,000 mm, turning length: 2,000 mm, faceplate diameter: 900 mm, Potisje lathe PA - 50 - DC. Itodpfxsww Igme Adlsl Excellent condition. Steady and following rests included, along with face plate. Cone attachment on the lathe.

Condition: good (used), Safety relay, safety control unit, undervoltage relay, switching device, servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter, control module, safety controller -Manufacturer: Reis Robotics, Safety Controller -Type: SCR2 -Identification number: 3522448 -Operating voltage: 24 VDC -Number: 2x safety controllers available Price: per piece Itjdpsmch Uxjfx Adlol -Dimensions: 385/210/H80 mm -Weight: 2.1 kg/pc.