Welding machine

Merkle MobiARC 280 cel

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws Blsdpfx Afoxv A I Tohec incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Bljdpsxddamefx Afhoc

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V Bsdpju Nwd Djfx Afhslc TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: new, Year of construction: 2025, operating hours: 1 h, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Bsdpfx Aevz Ih Tefhjlc Working pressure hydraulic system: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Rotation range: 360°, with a rotation speed of 13 rpm kink boom joystick control adjustable chassis Technical data: Manufacturer: HZC Power GmbH Model: DKB991 Engine: Buy diesel engine with 9.5 HP/7 KW Cooling: Hydraulic oil cooler Max. torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: Up to 150 kg Fuel tank capacity: 5.5 litres Electric starter: 12 volts Maximum climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Crawler chassis dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 litres (HLP46) Pump type: gear pump Slewing radius: 360° Slewing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Breaking force on the bucket: approx. 650 kg Hydraulic output: 30 litres per minute Digging depth: 1650 mm Overload height: 2150 mm Reach on the ground: 3000 mm Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lifting capacity: 600 kg Product/shipping weight: 940 kg Special features: Excavator arm with articulation (120°), hydraulically adjustable chassis from 90 cm - 110 cm, additional hydraulic connection on the excavator arm for hydraulic accessories

Condition: used, roll diameter / mm throat / mm workpiece height / mm Table dimensions: 615x615mm Bedsuddmropfx Afhelc

Condition: good (used), 1 x Drilling - tapping machine Wörner BG 16 with pneumatic feed (drilling by hand also possible) Coolant device Technical data: spindle speeds : 95 - 3.500 rpm (24 steps via pulley 2 via motor) mounting: MK 2 Drilling capacity in steel: 16 mm Threading in steel: M 8 The machine can be inspected under power. Bjdpfxjipyiwe Afhjlc

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm * Bodsvz Abhopfx Afholc

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS Bljdpfx Ajmxkdpsfhsc MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: used, Year of construction: 2013, operating hours: 8,500 h, power: 110 kW (149.56 HP), front tire size: 480/70R30, rear tire size: 580/70R42, Equipment: compressed air brake, front power take-off, 1551 AutoPow r 40 km/h,stepless & / 2058 ComfortView cab with cab suspension / / 2123 Comfort seat with / low-frequency air suspension, automatic / 2511 2 telescopic exterior mirrors, mechanical / extendable / 2567 with air conditioning and lifting roof Blodpfxou A Igce Afhec

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder Bljdpfx Ajgv Dinefhoc -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg