Used Electric Wire Rope Hoist 5T, High-Speed for sale (60,447)

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) Kjdpfx Ajyx Ii Doaysdk with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1994, High-speed radial drilling machine Donau Danuflex145 Kdjdjwtq Dyepfx Aayok

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system Kdsdpfsw Hxiwjx Aaysk c/w tooling ----- Clearance Sales -----

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, Kdodpey A H Tpefx Aayek extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: ready for operation (used), Year of construction: 1981, Immediately available from toolmaking in Switzerland: High-speed radial drilling machine HKS Model HKS 40 Kdedpfsy Alqgox Aayjk Year of manufacture: 1981 Morse taper 4 Drilling capacity: 40 mm Arm reach: 1120 mm Mounting height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total drive power: 6.5 kW Hydraulic vice Weight: 2600 kg Price: 2,000 EUR plus VAT ex works

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Ksdpfx Aaey Alkysyodk Price: EUR 2,750 plus VAT, ex-location.

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Kdsdpfjyxnzajx Aayek

Condition: excellent (used), For sale: Professional ABUS electric hoist with a lifting capacity of 3.2 t, including the original ABUS 3.2 t hook block and an automatic Conductix Wampfler cable reel. The set was removed from an operational facility. Complete set for installation on an overhead crane or transport system in a production hall. Hoist Technical Data • Manufacturer: ABUS Kransysteme GmbH • Lifting capacity: 3.2 t (3200 kg) • Model: GM 1032 • Year of production: 1993 • Lifting height: approx. 6 m • Rope diameter: 7.5 mm • Number of falls: 4/1 • Lifting speed: 1 / 5.3 m/min • Power supply: 380–415 V / 50 Hz • Insulation class: F • Protection class: IP54 Hook block • Manufacturer: ABUS • Lifting capacity: 3.2 t • Swivel hook Kdjdpeytymcsfx Aayok • Designed for use with ABUS hoists Cable reel • Manufacturer: Conductix Wampfler (Delachaux Group) • Max. voltage: 400 V • Protection class: IP55 • Max. current: 22 A Condition • Device dismantled from a working installation • Complete set as shown in the photos

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Kedpfx Aasvylh Usysdk Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Kdodpfx Aaeynnu Dsyek as prior sale!

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,696 h, travel distance X-axis: 550 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 21M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis CHIRON FZ 12 S High speed was manufactured in 1996. It features an X-axis travel of 550 mm, Y-axis travel of 330 mm, and Z-axis travel of 425 mm. The machine has a spindle speed of 12,000 rpm and a tool capacity of 12 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 12 S High speed vertical machining centre we have for sale. Contact us for further details. • Installed options: Preparation for 4th and 5th axis (control cabinet ready) Kodpfx Ajywy Sneaysdk • Status: Powered on, fully functional • Machine hours: 5,696 h Additional equipment • Pneumatic vices • Approximately 40 tool holders • Chip tray Technical Specification Taper Size SK 30

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Ksdpfxoyzxzis Aayodk Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: refurbished (used), Year of construction: 2002, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Completely overhauled in 2026 • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle Morse taper 4 • Infinitely variable speed adjustment • Stepless quill feed • Thread cutting device • Two 18 mm T-slots each on the machine base at rear and left • Machine lamp • Central lubrication • Table surface machined all around • Safety guard on drill • Coolant system Dimensions and Travel Tool holder: MT 4 Column diameter: 195 mm Table dimensions: 1200 x 750 mm Number of T-slots: 5 T-slot spacing: 125 mm Quill stroke: 220 mm Column stroke: 450 mm Distance, spindle nose — min. 40 mm to top of table: max. 710 mm Distance, spindle nose — min. 840 mm to base plate: max. 1510 mm Drilling radius: min. 540 mm max. 1590 mm Work table height: 900 mm Machining Data Drilling capacity (solid): St 60 up to Ø 45 mm GG 22 up to Ø 55 mm Kedpoyv A Ucefx Aayjdk Tapping: St 60 up to M36 GG 22 up to M45 Main Spindle Drive AC motor, frequency-controlled Power: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: up to 250 Nm, constant across 15 – 200 rpm Feed Drives Infinitely variable feed: 0.02 – 0.7 mm/rev Feed force: 12,000 N Electrical Data Operating voltage / freq.: 400 V / 50 Hz Control voltage: 24 V Total connected load: 9.3 kVA Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table: 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Year of construction: 1978, condition: good (used), machine/vehicle number: 2252928, load bearing: 500 kg number of burden strings: 1 Kjdpfx Aobpgvwjayodk stroe speed: 10 m/min electrical connection: 380 V, 1/0,25 kW weight: 69 kg

Year of construction: 1969, condition: used, machine/vehicle number: 3527849, Load capacity (two-legged): 600 kg lifting speed: 6 m/min Lifting height: 4 m Kedpeb H Iq Hjfx Aayjdk electr. connection: 380 V, 0,88 kW weight approx.: 40 kg

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Kdjdpfsflrhzjx Aaysk Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min Kjdpfxstlzdqj Aayodk -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist Ksdpfx Aajq Tvpxsyedk -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min Kdsdstnlz Uspfx Aayok -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg

Condition: good (used), Year of construction: 1980, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm Kdjdjvyzinepfx Aaysk -Weight: 142 kg

Condition: good (used), Year of construction: 1969, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: SWF, crane chassis with electric cable winch -Cable pull: Type 50H8d -Load capacity: 10,000 kg -Main stroke: m/min -Drive system: S0.85-4 -Travel speed: m/min -Roller spacing: mm, dimensions see photos -Drum speed: m/min -Quantity: 1 crane trolley available Kjdpfxjyvum Rj Aayjdk -Price: per piece -Transport dimensions: 1250/1960/H820 mm -Weight: 1320 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Kdodpeyuqmijfx Aaysk Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm Kdodpfevuua Nsx Aayek ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min Kedsvut Uxspfx Aaysdk distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: new, Year of construction: 2026, saw blade diameter: 630 mm, cutting height (max.): 200 mm, cutting range round steel at 90°: 200 mm, saw blade speed: 120 rpm, cutting range square steel at 90°: 170 mm, cutting diameter: 200 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 120 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-200 Circular sawing machines are industrial cutting solutions used for the high-precision and fast cutting of pipes, profiles, and solid metal materials. They are widely utilized on serial production lines to achieve quick, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical design and advanced automation system. The PLC-controlled automation system and touch screen operator panel enable easy adjustment of cutting parameters and allow serial cutting operations to be performed with high accuracy. The spheroidal cast iron machine body, powerful gearbox system, and servo-driven feed technology ensure vibration-free operation and extended tool life. CHK Series machines are specifically engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feeding system • PLC-controlled automation system • High cutting precision and stability • Robust construction for industrial use Fields of Application • Steel service centers • Metal processing facilities • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supplier industries Standard Features • Precise cutting and smooth surface finish • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system Kdsdpfxeyq Rk Ho Aayok • Scrap separation system • Diameter control system • Hydraulic motor-driven chip cleaning brush • Air pressure control system • Easy operation via PLC control unit • Torque control system for extended blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-200 Cutting Capacity (Round): Ø60 – 200 mm Cutting Capacity (Square): Max 180 × 180 mm Cutting Capacity (Rectangular): Max 170 × 210 mm Main Motor Power: 22 kW Hydraulic Motor Power: 5 kW Material Feed Motor Power: 3 kW Circular Saw Blade Size: Ø630 × 2.7 × 3.4 mm Blade Speed Range: 30 – 120 rpm Single Feed Length: 770 mm Bundle Feed Length: 3000 mm Scrap Length: 150 mm Machine Weight: 5500 kg