Crane chassis with electric rope winch 3200 kg

Stahl AS 3016-16 2/1

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Hsdpfxsrkgy Us Aa Sjff

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h Hfedpsxabnyjfx Aa Ssf total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: Hjdpfeqfc Egex Aa Sjff - Double-rail trolley with 4-corner rope outlet - Magnet System prepared - Radio remote control - Optionally with magnetic traverse or spreader

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat, or Uraca. Pump type: 250M P20 Operating pressure: 2,000 bar Flow rate: 34 l/min Drive speed: 1,500 rpm Drive power: 132 kW With EMK electric motor, with pressure control valve, Hfedpsxmki Tefx Aa Sjf with safety valve. Dimensions (LxWxH): approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the beginning of December 2023. Documentation available.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Hfjdpfx Aaewg R Rte Sof

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX series are compact water chiller units designed for outdoor installation. Features include: - Shell-and-tube evaporator - Electronic expansion valves - Compressor shut-off valves - System with compressors and hydraulic sound insulation panels - Ambient operating temperature down to -20 °C - Buffer tank and twin P2 pump - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, safety class A1 Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): Variable from 12.5 to 100% Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Maximum power input (kW): 235 Maximum current (A): 385 Starting current per circuit (A): 467 Protection rating: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: ok & tested Used Hjdpewzay Tofx Aa Sjff Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty On request, MTA offers a functional test of the chiller together with the buyer before collection at the Nettetal branch. Used machines may have visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Hjdpfxeuwktne Aa Soff Throat Depth 420 mm CNC Control

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Hodsupxfhspfx Aa Ssff Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Hsdpfx Aajuigzpo Ssff Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm Hjdpfx Aaeuhf Tzj Ssff throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!