Used Faymonville Max100-N-4X-9.30-(Cs) for sale (54,589)

Condition: ready for operation (used), functionality: fully functional, table width: 1,030 mm, total length: 2,400 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 700 kg, C-S Supervariomat with 3 transversely movable arms Adhesive press for solid wood 5 support arms 4 levels Ledpszvmf Nsfx Akmeru Adhesive application depth 103 cm, length approx. 240 cm Installation area 180 x 240 cm READY FOR USE

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design Lrodpfev Sw E Aex Akmju * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space length: 18,000 mm, loading space width: 2,540 mm, loading space height: 1,700 mm, total length: 18,000 mm, total width: 2,540 mm, total height: 1,700 mm, suspension: air, tire size: 435/50-R19.5, Equipment: ABS, - BPW axles - EBS - Lift axle - Air suspension - Disc brakes Available directly from stock: MAX200 with a flat loading ramp, lowered, capable of carrying up to 12,000 kg and vertically positionable, extendable by 4.5 m, equipped with a trailing steering axle and a lift axle: Technical data MAX200-N-3A-13.50-FTR-19.5-2.54 Total weight: 45,000 kg Coupling pressure: 18,000 kg Axle load: 27,000 kg Coupling height (loaded): 950–1050 mm Loading area length: 13,500 mm Extendable by: 4,500 mm Axle distance: 1360/1405 mm Vehicle overall width: 2,540 mm Total weight depends on coupling pressure. Loading area: Loading area in extendable design with pneumatic locking. The loading platform can be lowered hydraulically at the rear by approx. 2100 mm. Load capacity of the rear vehicle in horizontal position: 6 t. Lowered: Can be driven with an axle load of 12 t. 2 pairs of lashing points (LC 5000 daN). 1 pair of lashing points (LC 10000 daN). 6 pairs of lashing points that fold outwards (LC 5000 daN). 2 pairs of lashing points that fold outwards (LC 10000 daN). 1 pair of horizontal lashing points at the rear (LC 5000 daN). Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2000 daN). Tire pressure monitoring system (TPMS) according to ECE R 141. BPW axles with disc brakes. Tires 435/50 R 19.5 Options: • Red and yellow air couplings on the galvanized front connection plate. • 2 wheel chocks with holder. • Galvanized steel partition, approx. 1,600 mm high (approx. 35 kg), EN12642-XL • Loading area made of hardwood. • Hardwood floor on the hydraulic loading table. • 1 pair of aluminum ramps, type: VFR 105, 1,500 x 450 x 120 mm (L x W x H). • Holder for aluminum ramps under the ramp (approx. 88 kg). • 1 spare wheel holder under the loading area on the right. • Movable profile for attaching separate aluminum ramps at the rear of the semi-trailer. • Operating manual and description on a USB stick. • Holder for a rotating beacon at the rear, right and left of the vehicle. • Under the gooseneck and at the rear, on the left and right, a holder for warning signs with socket. • Electro-hydraulic unit (approx. 45 kg). Lredpfez Hci Nox Akmeu • 6 pairs of recesses in the loading area floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container (approx. 90 kg). • 10 pairs of tubes for stanchions (approx. 100 x 50 mm) in the outer frame of the loading area floor (approx. 30 kg). • 3 pairs of stanchion profiles, mounted crosswise in the loading area floor, for stanchions (100 x 50 mm) (approx. 95 kg). • Galvanized widening elements, extendable by approx. 230 mm per side (approx. 262 kg). • Lift axle on the front axle, controlled by TEBS E depending on axle load and loading condition (± 69 kg). • 4 warning signs (width ± 423 x 423 mm), extendable by ± 400 mm, each with one LED position light (± 25 kg). • Rope hooks (8 mm), approx. 500 mm below the edge profile of the gooseneck and the loading area floor (± 2 kg). Axle configuration Tire size: 435/50-R19.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 9000 kg; Steered;...

Condition: new, maximum load weight: 35,060 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. GOOSENECK: Gooseneck designed as a loading platform with a surface made of aluminum tear-plate sheeting. Hydraulic lifting drawbar, adjustable by approximately -280/+250 mm. Two kingpin positions at approximately 2,300 mm and 2,000 mm. For semi-trailer: 4 x 2, 6 x 2, or 6 x 4. - 2-inch kingpin. - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN). - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets. - 24N connection according to ISO-1185. - 24S connection according to ISO-3731. - 15-pin connection according to ISO-12098. - Yellow-red air couplings on the front connection bar. - Lighting for the operation of the gooseneck, suspension, and hydraulic locking, with on/off switch. - Brackets for hanging the supply lines on the front of the gooseneck. - Operation of all work lights in the gooseneck area via on/off switches on the gooseneck (operation of the work lights from the semi-trailer is not possible in this case). Lsdpfx Ajz N Nx Dskmoru LOADING PLATFORM: Loading platform, length approximately 9,500 mm, with angle profiles attached underneath to accommodate the load pallets (distance from kingpin to center of axle unit approximately 8,000 mm). - BPW axle stub, with drum brakes and single-wheel suspension, hydraulic axle equalization with lifting and lowering mechanism. - Lowering lock on the axles in case of suspension air spring failure, designed for a maximum pallet height of 150 mm. - 385/65 R 22.5 (M+S) - Manufacturer of our choice. - Mechanical drop-side supports for approximately 48,000 kg of support load. - Access ladder mounted on the front right with 2 retractable handrails. - Removable full fender on both sides in front of the axle unit. - WABCO Roll Stability Support (RSS). - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN). - Grid flooring support on the longitudinal beams, at the same height between the guide rails of the load securing system. - The first and last axle on the left and right can be manually lifted. - Storage box on the left and right behind the axle unit, protected from splashing water. - Beveled rear end for easier insertion of the load pallet. - Eyelets attached to the rear crossmember for mechanical locking. - Rear door with cross bracing, hinged on the left and hydraulically locked on the right, can be locked horizontally at 90°, 105°, and 270°. - Underrun protection that can be folded upwards for the transport of up to 4 empty standard pallets. - License plate with holder including lighting on the rear door. - One 7-pin socket on the rear crossmember. - Electro-hydraulic unit for operating the hydraulic functions (without installation in the semi-trailer). - TPMS tire pressure monitoring sensors installed in all wheels. - TPMS tire pressure monitoring system according to ECE R 141. - Indicator lights to display the nominal ride height in the vehicle control area. - 1 odometer mounted on the left. - 2 axle load gauges mounted on the left side, including axle load diagram. - 2 rubber buffers in the front of the loading platform as a stop for the load pallet. - Hydraulic preparation including control for the installation of 4 pairs of our hydraulic load securing systems. - 1 spare wheel holder on the right in the direction of travel. - Acoustic warning signal

Condition: new, maximum load weight: 36,040 kg, overall weight: 53,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request. Lodpfxoy Uwu Ij Akmjru Gooseneck: * Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm * Gooseneck hydraulically raisable/lowerable and extendable * For tractor unit: 6 x 4 or 8 x 4 Low-bed: * Low-bed with external beams in an extendable SUPER LOW design, length approx. 8,000 mm * Low-bed with a fixed hardwood floor approx. 40 mm thick and mechanical locking system * The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screw-on RUD rings Rear chassis: * Rear chassis with closed outer frame and diamond plate cover * Chassis with excavator bucket, which is closed in the rear half to accommodate the air tanks * 3 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 1 pair of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally, at the front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires: * Tires 245/70 R 17.5 3PMSF - at the manufacturer's choice. Load index (146/146F) Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paint: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Topcoat with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanized connection strip at the front * Trailer steering, operable from the front and rear via cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) * Preparation for mounting screw-on container positioning for 1 x 20', 1 x 40' or 1 x 45' containers on the outer beams. Without container locking mechanisms * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings * Electro-hydraulic unit * Spiral cable for supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with plug connection (NATO-NATO) * Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the semi-trailer * On the gooseneck and at the rear, left and right, one bracket each for the warning signs, including a socket * Manual and description on a USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pumps * 7 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD VLBG-4 rings * 2nd driving height, approx. 50 mm above the normal driving position, by means of manual operation * On the gooseneck, plug-in aluminum side panels and rear panel, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in frames are removable (length of the superstructure

Condition: used, Mitsubishi NF400-CS Circuit Breaker – 400 A For sale is a used Mitsubishi Electric NF400-CS circuit breaker. Manufacturer: Mitsubishi Electric Type: NF400-CS Lrjdpfxez Euyws Akmeu Rated current: 400 A 3-pole Voltage: 600 V AC Condition: Used Removed from a fully operational machine Fully functional up to removal Sold as pictured Signs of normal wear from use

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Lrjdpfx Akovz Eg Homju Weight 900 kg Total power requirement 3 kw

Condition: new, maximum load weight: 90,700 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area Lsdew Tgp Depfx Akmsru * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: new, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Here is an excerpt of the equipment. Complete equipment details are available upon request. GOOSENECK: Gooseneck with SNT design to optimize the loading area length, approximately 3,700 mm long, with a taper at the rear of approximately 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. Steel front wall, plug-in, approximately 400 mm high. ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. 3 kW electric-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches. Outrigger of the gooseneck with mounting holes for screwable lashing rings. One mounting hole in the rear upper area of the gooseneck outrigger for a screwable lashing ring. 1 pair of screwable lashing rings included (LC 10,000 daN). On the gooseneck, 1 pair of plug-in aluminum side panels, approximately 400 mm high, in an anodized finish. On the gooseneck, one plug-in aluminum rear panel, approximately 400 mm high, in an anodized finish. Approximately 40 mm thick hardwood flooring above the gooseneck. 2-inch kingpin. 1 crossmember pocket rail mounted in the loading bed of the gooseneck in front of the taper, for plug-in crossmembers, approximately 100 x 50 mm. Lrsdpez N Nxwjfx Akmju LOADING AREA: Loading area in an extendable design, approximately 8,800 mm long, with a taper at the rear of approximately 500 mm x 10°. A recess in the loading area that extends into the taper to accommodate the excavator arm, approximately 2,490 x 750 x 210/290 mm (L x W x H). TPMS tire pressure monitoring system according to ECE R 141. BPW axles and suspension, 1st and 2nd axles rigid, 3rd and 4th axles steered. 3rd and 4th axles with electro-magnetic reverse locking via reverse gear and can be activated manually. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Mechanical fifth-wheel supports with 2-speed gearbox and crank. Continuous hardwood flooring approximately 50 mm thick in the loading area, interrupted between the axles (thus increasing the coefficient of friction). 1 intermediate table with a recessed loading area, approximately 300 mm wide, for the extension tube with a large cross-section and sheet metal flooring. 1 pair of lashing rings on the front crossmember (LC 10,000 daN). 6 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN). Additionally, 1 pair of lashing rings on the outside of the front crossmember of the loading area, rotated approximately 90° inwards towards the loading area (LC 10,000 daN). Extensions (galvanized), extendable approximately 230 mm on each side (without wooden planks). 1 pair of fixed wheel arches, open to the extension, approximately 700 x 410 mm (W x D), in the loading area in front of the 1st axle. Between the 2nd and 3rd axles in the loading area, 1 pair of fixed wheel arches, approximately 1,695 x 700 x 410 mm (L x W x D). 1 pair of mechanical rear supports. 245/70 R 17.5 3PMSF twin tires - brand of our choice. HYDRAULIC LOADING RAMPS: DR-15/60-900-4350-HB-HV-M. A pair of two-piece steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm. Hardwood flooring. Hydraulically foldable ramp tips. Ramps can be individually hydraulically moved outwards approximately 235 mm and inwards approximately 215 mm. Hardwood flooring on the taper of the loading area. Ramp with hardwood fl

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) Lsdsxarmaopfx Akmjru * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted... Ljdjy Auh Iepfx Akmeru

Condition: used, operating hours: 1,908 h, functionality: fully functional, machine/vehicle number: 31123, mileage: 34,945 km, power: 220 kW (299.12 HP), first registration: 05/2024, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 4,200 mm, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, Engine OM936, R6, transmission G 211-12/14, 93-1.0, differential lock on rear axle, tank 290 l, AdBlue 60 l, rear underrun protection, ABS, ASR, ESP, Predictive Powertrain Control Air conditioning, cruise control, radio, winter service lighting, hands-free system, liftable roof, sunroof, Truck Data Center 7, pre-installation for toll collection, digital tachograph, comfort driver's air-suspension seat, co-driver's functional seat, multi-function steering wheel Ledpfxszabfye Akmjru Superstructure Aebi Schmidt Street King 660 DUAL, superstructure engine Deutz TD 2.9, disc brushes on the right and left that can be swiveled in, simultaneous sweeping, speed adjustment for the feed roller, rear suction system mounted on the container rear flap, HD washing pump 200 bar/50 L via truck PTO including hose reel and hand lance, HD flushing bar 200 bar behind the suction shaft, HD flushing bar 200 bar front-mounted on truck, manually swiveling, HD flushing bar 200 bar behind the feed roller, HD flushing bar 200 bar behind the disc brushes, HD flushing bar 200 bar for the rear suction system, 3-stage water volume control, spray bar on the right, mounted under the bumper with 2 water nozzles, spray bar in the middle, mounted under the bumper with 4 water nozzles, spray bar on the left, mounted under the bumper with 2 water nozzles, water tank level indicator in the display, additional water tank 1000 L, container hopper made of stainless steel, toolboxes/storage boxes on the side of the container, left and right, exhaust outlet upwards, dirt container with stainless steel leaf screen, dirt container with chain curtain in the container, emergency tilting of the container by means of a hand pump, rear view monitoring (rear camera), 2 cameras for the sweeping unit, overload indicator rear axle, 2 LED flashing beacons and 2 LED rotating beacons on the container corner.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) Lrodpfx Aeu Nuycekmeu suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: used, maximum load weight: 6,500 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 04/2010, Equipment: ABS, WIESE Tandem Trailer, Tarp & Flatbed – Excellent Condition – EBS/ABS – Air Suspension. Well-maintained WIESE tandem trailer with tarp and side rails from a reliable previous owner. The vehicle is in good, immediately operational condition. Vehicle data: First registration: 04/2010 * Permissible total weight: 10,000 kg * Unladen weight: approx. 3,500 kg Lsdpfx Asyn Tuvjkmoru * Payload: approx. 6,500 kg * Axles: 2 * Brakes: WABCO EBS with ABS * Body: Tarp & side rails * Manufacturer: WIESE Fahrzeugbau The trailer impresses with its robust design and is ideal for daily transport in local and long-distance operations. Special features: * Sturdy tandem chassis * Proven WABCO EBS braking system * Tarp and side rails in good condition * Immediately available If you have any questions, please do not hesitate to contact me.

Condition: used, axle configuration: 2 axles, first registration: 10/2026, color: other, Year of construction: 2006 Empty weight: 3.790 kg Axle 1: left 10 mm right 10 mm Lrsdpfx Asz Imuxskmeu Axle 2: left 10mm right 10 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: good (used), total length: 13,350 mm, total width: 2,550 mm, total height: 3,700 mm, Year of manufacture: 2012 Carrying capacity: 27.300 kg GVW: 12.700 kg Technical condition: good Visual appearance: good Production country: BE Please contact Christian Theißen for more information Manufacturer: Euromax GTZ-3AUB Ljdpfxoy H Du Se Akmeru Model: Multimax STN-4UBX Year of build: 2012 Condition: Used Data: First registration: 02/2012 Total dimensions LxWxH: 13,35 x 2,55 x 3,70 m Empty weight: 12.700 kg Total permissible weight: 40.000 kg Payload: 27.300 kg Number of axles: 3 Special features: Extendable by 3m (16.35m), forced-steering trailing axle, hydraulic lifting bed to gooseneck Location: Essen immediately available

Condition: used, axle configuration: 2 axles, first registration: 10/2026, color: other, Year of construction: 2007 Empty weight: 3.790 kg Lsdpfoz Im Tzjx Akmoru Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, empty load weight: 3,800 kg, maximum load weight: 14,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/1999, loading space volume: 31 m³, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, turntable, air-suspended, ABS (anti-lock braking system), U-protection, aluminum side bumpers Body: 2-axle silo trailer for dust and trickle goods with 4x dome cover approx. 31m³ Pressure tank test was renewed in June 2022! Next external inspection in 03/2024! Next internal inspection in 03/2026! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! Lrodevhkitjpfx Akmou - .

Condition: used, axle configuration: 2 axles, first registration: 10/2026, color: other, Year of construction: 2005 Empty weight: 3.790 kg Ledpfx Aksz Imxkjmeru Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: good (used), Manufacturer: MÜLLER MARTINI, year of manufacture: 1994, serial number: 94.00398.01 Lrsdpoy Ez Umofx Akmju

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: green, tire size: 17,5-25, Year of construction: 2010, operating hours: 11,738 h, machine/vehicle number: 384, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, Deutz engine Lsdpoqt Dwfsfx Akmeru Quick change device Total weight 11,000 kg max. load capacity 5,500 kg Max. lifting height 8,600 mm max. outreach 4,600 mm Errors excepted

Condition: used, axle configuration: 2 axles, first registration: 10/2026, color: other, Year of construction: 2006 Empty weight: 3.790 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Lsdpsz Im Tbjfx Akmoru We have the possibility to stack trailers!

Condition: used, axle configuration: 2 axles, first registration: 08/2005, color: other, Year of construction: 2005 Empty weight: 3.790 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm Lsdpfx Aksz Imy Iemjru We have the possibility to stack trailers!

Condition: used, Westtech Woodcracker CS750 Smart Available immediately Features: - Endless rotating tiltator - Cutting diameter: 750 mm - Gripper opening width: 1,280 mm - Own weight (basic/fully equipped): 820/980 kg - Recommended hydraulic flow rate: 65–110 l/min - Recommended operating pressure: 230–280 bar - Carrier vehicle operating weight: 15–30 t - Saw box: actively suspended - Saw chain lubrication: grease - Optional: Power tiltator, endlessly rotatable Lodpfx Asyfqz Uekmoru Multiple units in stock / fits perfectly on Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be supplied in combination with a Magni machine. Also compatible with Merlo. We are official Westtech Woodcracker sales and service partners, Magni telehandler sales and service partners, JCB construction equipment sales and service partners, Mercedes-Benz service partners, Iveco service partners, and with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: excellent (used), mileage: 6,53,829 km, power: 184 kW (250.17 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 7,390 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, Equipment: ABS, AdBlue, central locking, power mirror, spoiler, tail-lift, = Additional options and accessories = - Radio - Roof Spoiler - Side door - Sun visor - Tailgate Lrjdps Act Etsfx Akmeu = More information = General information Number of doors: 2 Year of construction: 2017 Cab: single Registration number: 1AQR481 Technical information Engine capacity: 7.698 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.700 kg Carrying capacity: 4.300 kg GVW: 12.000 kg Functional Tail lift: dhollandia DHLM 20, tail lift, 1500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A