Used Filtec Varifill32/8 for sale (35,026)

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System Kedjwhzmnspfx Ai Ejlt BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe Klodpfxjtqmnnj Ai Est GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 Ksdpfowhzmzjx Ai Eolt - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: excellent (used), Year of construction: 2008, Used flexo machine NILPETER FA4-8-color Labelpress Ksdpfxsy Sirtj Ai Eslt •⁠ ⁠Age: 2008 •⁠ ⁠Serial No.: F4289 •⁠ ⁠Web Width: 420 mm - 16.5 inches •⁠ ⁠Servo Driven •⁠ ⁠8 x Flexographic Print Units •⁠ ⁠8 x UV Dryers System from GEW •⁠ ⁠Labelshifter •⁠ ⁠Web Control •⁠ ⁠Splicing Table •⁠ ⁠Die Cutting •⁠ ⁠Die Cutting Stations •⁠ ⁠Maximum Rewind Diameter 1000 mm – 40“ •⁠ ⁠Video Monitoring BST •⁠ ⁠Turn Bar •⁠ ⁠Automatic Register •⁠ ⁠Prints Film 25-300 Microns (3 Options: Folie or Paper or Carton) •⁠ ⁠And tools (Magneticcylinder, Printingcylinder, Aniloxcylinder etc.) In production Available immediately

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 159 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/18-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. Klodpfx Aioy Tw Hbj Est TECHNICAL DATA: Model HDS 8/18-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 800 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 159 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, Electric chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1 Fab. No. 1524132 Year of construction 1997 lifting capacity 2000 kg Kjdpfx Aijkwh H As Ejlt hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. load strands 2 Cable length control bottle approx. 0,9 meter rated power 1,6 kW / 0,36 kW Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eye on the top of the crane - emergency stop weight 75 kg good condition

Condition: used, SIEMENS CONNECTION PANEL HT 8 6FC5403-0AA20-0AA0 HT 8 Ksdpfxjy Tbx Ue Ai Eelt Condition New

Condition: used, Year of construction: 2026, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. Ksdoy S U Slepfx Ai Eelt The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg PLEASE NOTE!!! This machine is a return item. 5 units available. No cross-braces, fully functional NO WARRANTY!

Condition: used, Year of construction: 2026, ROLLER FEEDER 1.35 m Aurora LS38-8 Device description Height adjustment range: 670–1125 mm Table dimensions: 1330 x 480 mm For feeding and receiving workpieces Highly durable steel roller bearings Variable height adjustment - fits any machine height Versatile application, e.g. for metal band saws Technical parameters Table dimensions (L x W) 1330 x 480 mm Height adjustment range: 670 - 1125 mm Rollers: 8 rollers Ø38 mm x 400 mm Kljdpfjw Icqyox Ai Eet Max. load capacity 300 kg Weight 21 kg PLEASE NOTE!!! This machine is a return item. Two rollers are missing. NO WARRANTY!

Condition: excellent (used), functionality: fully functional, mileage: 1,15,199 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 06/2022, next inspection (TÜV): 02/2028, fuel tank capacity: 70 l, emission class: euro6, energy efficiency: D, color: grey, number of seats: 8, number of previous owners: 1, machine/vehicle number: HOCW124, Equipment: ABS, additional headlights, air conditioning, airbag, all wheel drive, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, trailer coupling, winter tires, 7831 Graphite Grey Metallic Dark Paint BA3 Active Brake Assist BH1 Hold Function C70 Pedestrian Protection CF0 Standard Chassis CL1 Steering Wheel Adjustable for Tilt and Height CL3 Leather Steering Wheel CL4 Multifunction Steering Wheel with Trip Computer CM2 Bumpers and Attachments Painted in Body Colour CU4 Aerodynamics Package D12 Roof Rails/Luggage Rack E07 Hill Start Assist E1D Digital Radio (DAB) E34 Buffer Battery for Start Process EA4 Audio 40 ED4 Fleece Battery 12 V 92 Ah EL8 Two-Way Front Speakers ET4 Active Distance Assist Distronic EZ5 Parking Package EZ8 PARKTRONIC F61 Interior Rear-View Mirror F68 Heated and Electrically Adjustable Exterior Mirrors FF1 Centre Console with Storage Compartment FK2 Chrome Radiator Grille FKB Estate/Combi FP4 Chrome Interior Package FR8 Reversing Camera G43 9G-Tronic H00 Warm/Cool Air Duct to Passenger Compartment H12 Auxiliary Hot Water Heater H15 Heated Seat for Front Passenger H16 Heated Seat for Driver H20 All-Around Heat-Insulating Glass HH9 Semi-Automatic Climate Control TEMPMATIC HZ0 Electric Auxiliary Heater HZ7 Semi-Automatic Rear Climate Control, TEMPMATIC IL6 Metallic Paint IN2 Wheelbase 3200 mm, Long Overhang J55 Seatbelt Warning for Front Passenger Seat JA1 Warning Lamp for Washer Fluid Level JA7 Blind Spot Assist JF1 Rain Sensor JH3 Communication Module (LTE) for Digital Services JK3 Instrument Cluster with Pixel Matrix Display JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Tank 70 Litres L Left-Hand Drive LA2 Light Assistant LB9 Exit Lighting LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG8 High Beam Assist Plus LP2 Interior and Ambient Lighting Estate/Combi LX5 Europe M5O 174 kW (237 hp) MJ8 ECO Start-Stop Function MK8 Speed Limit 210 km/h MO6 Emissions Standard Euro 6D M/N1 Gr. II MU8 Engine OM654 DE 20 LA Output Level 5 Top Type MX0 BlueEFFICIENCY Package Klodpfx Aisy R S H Do Ejt Q50 Detachable Tow Ball QA4 Towing Capacity 2,500 kg R1Q Light Alloy Wheels 8.0 J x 19, 10-Spoke Design RM4 Comfort Tyres RY2 Wireless Tyre Pressure Monitoring Front and Rear SA6 Passenger Airbag SB1 Comfort Driver’s Seat SB2 Comfort Passenger Seat T14 Active Stopper Sliding Door T19 Sliding Door Left U3V Vis-à-vis Seat Mounting 1st Row Track System U73 Armrests for Passenger Compartment Seating UR1 Quick Release Seat Rail System US4 Comfort 3-Seater Bench 1st Row, Foldable Outer Seat US5 Comfort 3-Seater Bench 2nd Row with Foldable Outer Seat V23 Upgraded Interior Panelling V33 Carpet Flooring in Rear V44 Carpet Flooring Front Cabin VF4 Caluma Black Fabric VH1 Grab Handles in Rear W16 Fixed Window Front Left in Side Wall/Sliding Door W17 Fixed Window Front Right in Side Wall/Sliding Door W50 Twin Rear Doors 180 Degrees Without Window W70 Privacy Glass in Rear, Black Tinted W78 Rear Gate/Twin Doors Window with Washer and Wiper XA8 3,100 kg Weight Variant XC9 COC Documents XM0 Model Update Z42 Passenger Car Registration ZG2 Permanent All-Wheel Drive ZM4 Estate/Combi Vehicle ZQ9 Tourer SELECT

Condition: used, functionality: fully functional, empty load weight: 2,580 kg, Year of construction: 2004, load capacity: 8,000 kg, Heavy-duty trailer Condition: Ready for operation and fully functional Klodpfx Ajy N H D Iji Eet Technical condition: Good Description: Tandem trailer – 2-axle trailer MÜLLER MITTELTAL ETS-TA-B 10.7 – payload 8,000 kg – unladen weight 2,580 kg – permissible total weight 10.7 tons – galvanized low-loader with sturdy (mechanical) access ramp, ramp length approx. 2m – lighting system 12V – internal loading area length 5.50 m – internal width 2 m – total length incl. drawbar 7 m – loading height 60 cm – side walls approx. 35 cm high – good tires

Condition: ready for operation (used), Yaskawa Model: UTOPE-YN encoder REV.8, used, normal signs of use, 100% functional, scope of delivery as per photos Kledpfx Aoy S Nnhji Ejt

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: Kledpfx Asy S Ru Asi Eot The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, empty load weight: 7,300 kg, maximum load weight: 23,700 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, climbing strips on the outside of the ramps and rear slope, one-piece hydraulic ramps, loading height: 880 mm, incl. axle load indicators. Surcharges for: last axle as steering axle: €3,500, warning panels + lighting and rotating beacon: €200, widening to 3 m with wooden inserts: €300, hydraulic ramp shifting: €1,000. Also available with K80 towing eye! -- Errors, mistakes and changes excepted, sample pictures -- More details at: ! Klsdpfx Aijy Slxcj Eot

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display Klsdpfx Aiey S S Aze Eet LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Condition: used, Number of sanding units 4 st. sanding width 1.300 mm Kledpfjxr N I Ejx Ai Eet Sanding height max. ca. 140 mm

Condition: good (used), Year of construction: 2013, lifting height: 5,700 mm, fuel type: electric, Empty weight: 1.420 kg Lifting capacity: 230 kg Working height: 770 cm CE mark: yes Technical condition: good Kedpfjxtcbzjx Ai Eolt Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 1,89x0,76 Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Optimum 8 Year of build: 2013 Condition: Used Data: Max. working height: 7,70 m Platform height: 5,70 m Lifting capacity: max. 230 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 1,68 x 0,71 m Platform lenght pushed out: 2,59 m Total dimensions LxW: 1,89 x 0,76 m Height transport position with railing: 2,00 m Height transport position without railing: 1,14 m Movable up to working height: 7,70 m Ground clearance: 0,06 m Drive type: Batterie Only indoor using: ja Own weight: 1.420 kg Special features: White tires, attachment points for personal protective equipment (PPE) present. Location: 41468 Neuss: immediately available

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Ksdpfx Aiofiryfj Eelt R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Ksdpfx Ajfiqdcei Eelt Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Special Overseas Packaging 8 meter press brake 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000m², the Durmazlar Group and its D

Condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Kodofiqa Rspfx Ai Ejlt Special Overseas Packaging 8 meter press brake 800 tons. With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA Maschi

Condition: new, I sell Lowara 15SV17P150T 8-24m3/h 15Kw pump, New. I have different power of Lowara pumps. Ksdpfx Aisvccyys Eolt We can help arrange a cost-effective shipping company or courier for you.

Condition: new, Sale, Lowara vertical pump/New Kljdpovilhaofx Ai Eet Parameters : - Capacity max: - 8000L/h - 2400L/h. - Lifting height max: -76.5m - 23m - Motor power: 1.5 kW - Rotational speed: 2900 rpm We can help arrange a cost-effective shipping company or courier for you.

Condition: used, functionality: limited functionality, Year of construction: 2008, operating hours: 109 h, load capacity: 350 kg, fuel type: electric, drive type: Elektro, Scissor lift Kjdpfxey T Aphe Ai Ejlt Condition: Ready for use and fully functional Technical condition: poor Battery condition: 0 - 20% Description: Batteries need to be replaced.

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Kedsvv E Hiopfx Ai Eelt Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.

Condition: used, Year of construction: 1999, Used Filling Machine Fimer 1999 Used filling machine for wine in carboy, Fimer, model RT 8/1 VA from 1999. It can reach speeds of 400 carboys/hour for the 5 liter format while for with the 12-liter format it reaches 200 carboys/hour. Klodpjvlnvljfx Ai Eet Its rotation direction is clockwise and it has 8 valves. It applies volumetric filling. It has Standard 20.5 diameter tap. 35 x 18 aluminium screw cap. The filling machine is sold with its accident prevention systems and also all its documentation and user manuals. It has been mothballed. The machine is kept in good condition and used in recent years for filling wine in 12 liter carboys.