Used Haffner Router for sale (425)

Condition: good (used), Code: 0309 Chjdpfx Aoylpp Dsf Asc Brand: COSMEC Model: KV 1000/C Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Chsdpfx Aoz Icmkef Ajc

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated Cedpfjz Df Txjx Af Aehc stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Cedpfxjy H Dzfj Af Aohc Total number of tool changer positions: 34

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 22 Total number of tool changer positions: 36 Csdsy Edpmjpfx Af Aohc

Condition: used, A Klein & Söhne rigid table router or rigid router for profiling and routing timber, fitted with an Aigner integral stop. Technical data: Cjdpfszryqdjx Af Ajhc - Spindle diameter: 30 - Clamping length: approx. 120 mm - Speed (milling cutter): 3,000/4,500/6,000/9,000 rpm - Direction of rotation: anti-clockwise and clockwise

Condition: used, Rotary milling cutter with 3-roller feed mechanism. Chodpezd Tgvsfx Af Aoc Location: Nattheim.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Cedpfxszy Stas Af Aehc Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Cobtjzmn N Reiaf Smorg Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg We can ship the machine to your address.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP Csdpfszc E A Iox Af Aohc • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Cjdpfjw Idgvox Af Ajhc Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Chodev Im Swopfx Af Asc Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Year of construction: 1978, condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Chodpfx Afod Nzfcj Aoc

Condition: used, Spindle with carriage of 150 cm and feed by 2 rollers Chodoz Ahc Aopfx Af Aoc Note: Saw not working, the support bed is missing (see photo)

Condition: excellent (used), Saw Machine Haffner KL-176 Chjdpefk I U Rsfx Af Asc

Condition: used, Technical specifications: Cjdjzhub Nepfx Af Aehc Max. distance from the table to the spindle: 180 mm Vertical spindle travel: 100 mm Spindle adjustable pneumatically and hydraulically Interchangeable spindle Adjustable table (up and down) Spindle speed: 1000/2000 rpm Motor power: 4 kW Power supply: 380 V

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: workshop-inspected Column extension: 750 mm Spindle stroke: 100 mm Cedpsw I U Udefx Af Ashc Max. clearance between table and spindle: 310 mm Spindle speed: 10,000/20,000 rpm Motor power: 2.2/3.3 kW Tool clamping: collet chuck With air blast device via compressed air connection External dimensions: 905 x 1380 x 1600 mm Weight: 533 kg Availability: by arrangement Location: Hochheim

Condition: excellent (used), Angle adjustment Speed control Central spindle lubrication Chodpfx Afswtl N Ds Aec 5 kW motor Spindle diameter 30 mm Table length 240 cm Table width 35 cm Support extendable up to 80 cm Request more information

Condition: excellent (used), functionality: fully functional, COPY SHAPER and SANDER machine , automatic , model BALESTRINI CP 90 - 4 second hand machine working condition : Excellent CE mark : YES with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 4,5 / 6 ( 2 speeds ) max. working width mm.500 max. workinh heigth mm.180 Cedpfjx A Hatjx Af Aehc max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:18 m/min. hydraulic carriage return speed: 75 m/min. volt. 380/50

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Chedpfx Asxlzg Hef Ajc Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: used, machine/vehicle number: 008473, X axis working area: 5000 mm Y axis working area: 1640 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Csdpfx Aoywaf Isf Ajhc Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008471, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Chodpoywaf Uefx Af Aec Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer a refurbished table-mounted milling machine, type FZ0, from the manufacturer F. Zimmermann. Here are the technical specifications of the machine: Table size: 430 x 240 mm T-slots: 12 mm / 3 pieces Travel in X-axis: 240 mm Travel in Y-axis: 160 mm Rotational movement: 360° Swivel: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with locknut, Ø 8 mm - CE marking - Support/cross table - Milling guard made of Plexiglas - original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 180 kg The machine has been painted in RAL 7035 light gray, the drives have been cleaned, inspected, and fitted with a new belt. You will receive a set of milling tools with the machine. VAT will be shown separately on the invoice. Shipping is possible for an additional charge. If you have any questions, please do not hesitate to contact us! Chedpfozliahex Af Aec

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports Chodpszugvrefx Af Ajc • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Year of construction: 1977, condition: good (used), swivel head, top-down adjustment of the table top, two types of speeds: 18,000 and 24,000, overall dimensions: height 1570mm, width 1170mm, length 1150mm, Chodpfxoicld Te Af Ajc

Condition: used, Year of construction: 1980, Used machine Chjdpfx Afez Dyd So Aoc Year of manufacture: 1980 Table size 1100 x 760 mm Motor 4.7/5.7 kW, pole-changing with right/left rotation Milling arbor MK 5 / 30 mm Height and swivel adjustment via handwheel Spindle speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor -5 to +45° Milling stop with Panhans cast iron stop jaws mounted on a round insert plate and thus rotatable by 360° with Haffner 4-roller feed device Weight approx. 850 kg Availability: short notice Location: Flörsheim