Used Hammer - Felder - Austria A 2 - 26 for sale (1,05,374)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Csdpfx Afjuxfu Ns Aehc Pr...

Condition: used, Technical specifications: Max. saw blade diameter: 450 mm Min. saw blade diameter: 350 mm Saw blade spindle diameter: 30 mm Scoring saw diameter: 120 mm Scoring saw spindle diameter: 20 mm Scoring saw with separate motor Electronic height adjustment of the saw blade Chsdpfxezd Egne Af Aec Tilting saw blade, adjustable from 0° to 45° Electronic adjustment of the saw blade tilt angle Carriage length: 3200 mm Carriage lock Work table: 2060x1050 mm Table height: 905 mm Table extensions Dust extraction port diameter: 100/120 mm Manually adjustable fence 2120 mm long fence with 2 stops Eccentric clamping device Guard Safety switch Power supply: 400 V Main motor power: 5.5 kW Scoring saw motor power: 0.75 kW Overall dimensions: Length: 3500 mm Width: 4180 mm Height: 1240 mm

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Cjdpfezkt Itsx Af Ashc Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Chjdezktnyepfx Af Ajc Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986

Condition: used, machine/vehicle number: FDU1308/2161558 001, Gearbox (Servo Motor) Stardrive For Bertolaso Filler/Capper Chodpfoz Ick Aox Af Aec

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand Chodpow Tmd Usfx Af Aoc -Pallet rack: boltless rack, heavy-duty rack with storage shelves 2 bays / rack length 5600 mm -20 levels: compartment height adjustable -Stands: 3 pieces 3780/(1120/120 mm -Cross braces: 40 pieces 2765/60/240 mm -Rungs: 40 pieces 1115/50/100 mm -Shelves: 18 pieces of chipboard 2680/1090/40 mm -Price: complete -Transport dimensions: 3780/1500/H1400 mm -Total weight: 2010 kg

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds Codpfxjzutnno Af Aohc . .

Condition: used, Year of construction: 2011, Scissor lift – JLG 260 MRT-A Manufacturer: JLG Model: 260 MRT-A Year of manufacture: 2008 Technical data Working height: 9.92 m Platform height: 7.92 m Platform length: 2.59 m Platform width: 1.65 m Total weight: 3,390 kg Length: 2.67 m Width: 1.75 m Overhead clearance: 2.36 m Basket load capacity: 570 kg Outriggers: none Cedpfezd Hzgsx Af Aohc Drive: Diesel Special equipment Platform extension: 1.22 m Off-road tires, foam-filled All-wheel drive Driver's license class 3/B Dates/status TÜV (technical inspection): not applicable UVV (accident prevention regulations): valid until: 07/2026 Mileage: not applicable Operating hours: 2,448 hours as of 02/2026 Indicated price plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m. Subject to changes and errors!

Condition: used, Technical specifications: Max. planing width: 230 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom, right, left, top Number of steel feed rollers (top): 3 Number of rubber feed rollers (top): 1 Dust extraction port diameter: 4 x 120 mm Two feed speeds Feed mechanism: cardan shafts Table lubrication pump 1 smooth roller in the table Pressure: 6 atm Manual body lifting Power supply: 400 V Total power: 16.5 kW Overall dimensions: Cedpfx Aozd A Rwef Aehc Length: 3700 mm Width: 1500 mm Height: 1700 mm

Condition: new, functionality: fully functional, This is a brand-new conveyor dishwasher from the manufacturer Hobart, from the latest series, type FLOW Line 2-SN-A-R-DS5, FHP. Please note that the images shown are examples of the machine. Please note the overall length of 6550 mm. This machine is immediately available with a full manufacturer's warranty, at an attractive special price. If you are interested, we will send you all the equipment details by email. You will receive an invoice with VAT shown. The current new price is approximately €75,000 net. Technical data: Direction of travel: Left/Right Type of heating: Electric Plate capacity: 2830/3690 plates/hour Machine filling: Power-Boiler Dimensions: Machine length: 6550 mm Usable passage width: 612 mm Usable passage height: 440 mm Body width: 865 mm Body width including control cabinet: 980 mm Body height: 1960 mm Height including attachments: 2150 mm Infeed area: 740 mm Usable outfeed area: 1100 mm Connection values: Electrical connection: 47.1 kW Exhaust values: Exhaust volume: 350 m3/h Exhaust temperature: ~17°C Exhaust humidity: 90-98% Tank capacity: Tank volume for initial filling: 264 L Fresh water consumption: 145 L/h Regeneration water quantity: 60 L/h Csdoz Hvtuepfx Af Aehc Further details: Model: Multi-tank conveyor dishwasher Type: FLOW Line 2-SN-A-R-DS5, FHP Items to be washed: according to DIN EN 17735 Direction of travel: Left/Right Type of heating: Electric Plate capacity: 2830 plates/hour Plate capacity max.: 3690 plates/hour Passage width/height: 612 mm/440 mm Hygiene performance: according to DIN EN 17735 Infeed component: Infeed 2 (L=110 mm) Pre-wash: Wash and neutral zone SN (L=1400 mm) Wash: Wash zone A (L=900 mm) Rinse: Rinse zone R (L=650 mm) Drying: Drying zone DS (L=1400 mm) Outfeed: Outfeed module 5 (L=1100 mm) Exhaust system: CLIMATE-PRO Condition: Factory new, full manufacturer's warranty, commissioning and transport directly from the manufacturer will be charged separately. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Chedpfx Afezy Egto Asc Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,000.00 net, free on board!

Condition: excellent (used), functionality: fully functional, Four-sided planer Weinig Profimat 26 Fortec + EM11 Working width: 230 mm Working height: 130 mm Number of spindles: 5 Spindle arrangement: Bottom 5.5 kW Left Right 11 kW Top 7.5 kW Bottom 5.5 kW Material feeder: Weinig EM 11 Pneumatic pressure rollers divided into 3 sections Feed speed adjustable via frequency inverter: 5–24 m/min CE certificate Technical documentation Chodpfx Asyn Et Rjf Ajc

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 5 Weights Empty weight: 450 kg Functional Dimensions of cargo space: 150 x 71 x 80 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-12ton Delivery terms: EXW Chedjyym Iuspfx Af Aoc Working pressure: 180 bar Required hydraulic flow: 90 l/min Strike count: 350-700 Production country: KR Additional information Please contact Ö. Inalkac for more information ABH-430M is a HYDRAULIC breaker/hammer for CAT/ Caterpillar Backhoe Loaders. This model is included pins for CAT/ Caterpillar 428D, 424D, 430D, plug and play! We can also supply HYDRAULIC breaker/hammer for Komatsu, Case, Hidromek and Volvo backhoe loaders. AJCE is looking for dealers! contact us for details. хидравличен чук hidraulinis plaktukas Hydraulikhammer marteau hydraulique BRH martillo hidráulico ciocan hidraulic hidraulikus kalapács hidraulični čekić martelo hidráulico hydraulické kladivo υδραυλικό σφυρί

Condition: like new (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. WEISHAUPT WM - G20 (2600 kW) Chodpfx Aszab H Djf Ajc - Output: 350 - 2600 kW - Design: ZM - Year of manufacture: 2015

Condition: excellent (used), MANUFACTURER: ATLASCOPCO MODEL: GA26 P S/N: API320780 YEAR: 2012 POWER (kW): 26 CAPACITY (m3/min): 4.16 PRESSURE (bar): 10 Chodpfx Aeya Dudef Aoc

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Overall height 4340 mm Overall width 3270 mm Overall depth 1680 mm 26 supports for 250 kg payload each in the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm intermediate shelves are available for 0 load units, allowing for a payload of 120 kg per usable level intermediate shelves can be manufactured upon request Storage table at a height of 900 mm above floor level - V2A stainless steel countertop Chjdodnh R Hjpfx Af Asc Color: Grey / Grey Surface cleaned, signs of use and minor deformations possible Motor power, drive: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes, or minor deviations in the illustrations Photos of a similar machine Assembly currently mainly in Germany, Austria, and some neighboring countries

Year of construction: 2023, condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill rods, 4000 mm x 85 mm, 2 7-8" API Reg 02x adapter shank 2 3-8" API Reg Pin x 2 7-8" API Reg Box Cedpfshypv Usx Af Ashc 02x 140mm DTH drill bit 02x 5" DTH hydraulic hammer with DHD350 shank, 2 7-8" API Additional information: Intended use: Construction General condition: very good Technical condition: very good Visual condition: very good

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total width: 5,440 mm, total height: 2,000 mm, total length: 1,700 mm, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Codezzbc Tepfx Af Ashc Voltage: 380 V Current draw: 85 A Fuse rating: 100 A Power: 38 kW Dimensions (L x W x H): 1,700 x 5,440 x 2,000 mm Shipping packages: 1 unit EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2021, Format: 0x0 Speed: 150 pieces per hour Power: 230 V (A.C.), 50/60 Hz Net Weight: 45 kg Measurements: (LxWxH): 50 x 75 x 35cm Equipment: Mechanical speed: 150 pieces/hour pneumatic drive height adjustable table heating plate for preheating glued bindings movable plate heated rounding book block thickness of 8-80 mm Chsdpfsyxqwdsx Af Aoc book block height max. 520 mm

Condition: used, mileage: 7,85,000 km, first registration: 03/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro2, Year of construction: 2000, Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Registration number: BELGIUM = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. Codsz Hc Rtjpfx Af Ashc - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Chsdpfx Afsv Uzr Ej Aec

Condition: used, Technical specifications: Max. planing width: 230 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Chedpfszza Ibox Af Aoc Spindle arrangement: bottom 5.5 kW right + left 11 kW top 7.5 kW Number of steel feed rollers: 4 Number of rubber feed rollers: 1 Diameter of extraction nozzle: 120/140 mm Infinitely variable feed speed adjustment: 6-22 m/min Feed via cardan shafts Lubrication pump for the work table 1 smooth roller in the table Pressure: 6 atm Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1460 mm Height: 1850 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5250x1930x1860 mm Chsdpov A Hrgofx Af Aoc Weight 6650 kg Total power requirement 71,68 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4280x1700x1700 mm Weight 4600 kg Total power requirement 43,6 kw Codjv A Hp Eopfx Af Aehc

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Overall dimensions: Cjdpfx Aezd Evvjf Ajhc Length: 1000 mm Width: 1100 mm Height: 1400 mm