Used Haulick Roos Press for sale (13,330)

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! Iedpfeh Rkhnex Anveau 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine Ijdepvlf Sepfx Anvoau strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Iodpfx Asu Nyu Sjnveau Pr12LP Control unit GE VAT20 U20NOK7S Find more items in our shop!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h Iodozaricopfx Anvoau L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication Iedpfx Aozb Du Honvsau with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Iasdpfx Anezdd Rgevou Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm Iasdpjzb Iihsfx Anvju EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1996, We offer this used MAN Roland R-704 3B offset printing press, year of manufacture 1996. With Fuji 120 KVA UPS with Battery. (Unused) Type: R-704 3B Serial number: 26019 B Year of manufacture: 1996 year Country of manufacture: Germany Electrical equipment standard: IEC Iasdpfx Anszcfbwoveu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 31765 B, color channels: 5, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 744 mm, paper height (max.): 592 mm, counter reading (color): 2,50,00,000, Key Technical Features & Benefits Maximum Production Speed: Runs up to 18,000 sheets per hour, ensuring you hit even the tightest deadlines. Substrate Flexibility: Effortlessly handles different gsm materials It’s a true "all-rounder" for paper and thick cardboard. Large Transferters: Double-diameter transfer cylinders and impression cylinders ensure "mark-free" printing and a smoother sheet travel path. Quick Start-Up: Features advanced automation for plate loading and wash-ups, significantly reducing make-ready times and substrate waste. Pecom Control System: Integrated console for precise remote ink and register control, ensuring color consistency across long runs. Ergonomic Design: Low-profile construction for easier access and maintenance compared to taller competitors. Automation: PPL (Power Plate Loading) / Automatic Wash-upInking Units: 16-roller high-performance inking system All units are UV Prepared 1 UNIT UV INTERDECK Iasdpfxoy Ipmve Anvsu PLUS END OF PRESS UV Also has an IR DRYER

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm Isdpfx Ajy U Hmgenvsau 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Isdpfx Anemqi Akevjau

Condition: used, Year of construction: 2008, functionality: fully functional, Goss M600 Iodpfx Asy Nax Ssnvjau 578 Cut-Off Please contact for more details

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Iaodezc Rhvspfx Anveu Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Accessories: ruffler and special press ram

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. Iedjy Uiyvspfx Anvoau The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Ijdpfxey Uc Nkj Anvsau Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Iedpfohga Srsx Anvoau Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: excellent (used), Year of construction: 2024, machine that shapes metal or material under very high pressure Iaedpsy A Hv Dsfx Anvsu

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Iaedpfozdazhjx Anvju Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Iajdjzdazbjpfx Anvju Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Iedpjzdaxyefx Anvsau After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. Iaedpfezdawvox Anvju 230V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Nagel Citoborma 180 Paper Drill Iaedpjzdav Esfx Anvou This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Baier Geba 1/P Hot Stamping Press The machine is in perfect condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Iasdpfx Ajzdaunonvju A stand is included. Description The Baier Geba 1/P hot stamping press is an automatic press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or printing house. The automatic presser starts and operates on a 230V power supply with compressed air. A powerful presser with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: automatic Press force: 8 kN Power consumption: 320 W Plate size: 110 x 70 mm Power supply: 230 V Machine weight: 150 kg

Condition: new, Year of construction: 2026, neu 2026 070223 September 2026, Zwischenv Türkei 20100 € 385.92 € 10 to 1.4 mm 270 mm 370 mm 100 mm 1 - 40 mm 200 1/min 4 35 mm 25 mm 160 mm 180 mm 0.75 kW 1170 mm 1180 mm 1700 mm 590 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads € 132,- Iasdpfx Ajwirqgsnvou bolster plate € 220,- Symbolic photos, picture incl. optional available bolster plate

Condition: new, Year of construction: 2025, neu 2025 070145 prompt, Zwischenverkauf v Türkei 44500 € 849.95 € 1 40 to 4 mm 630 mm 450 mm 160 mm 3 - 75 mm 154 1/min 420 x 275 mm 8 75 mm 40 mm 230 mm 293 mm 4 kW 1174 mm 1540 mm 2200 mm 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Iaedpfexcg D Ssx Anvsu Front light guard Vibration pads User Manual in German with CE Declaration of Conformity