Used Heid S-200 for sale (77,421)

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control Hsdpfjgz Tbdex Aftjfl power supply 400 V / 50 Hz

Condition: used, Year of construction: 2001, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: E-07687, overall weight: 1,300 kg, load capacity: 200 kg, arm reach: 2,643 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: RJ3, teach pendant manufacturer: Fanuc, control cabinet width: 800 mm, type of input current: three-phase, repeat accuracy: 0.3 mm, warranty duration: 6 months, With just under 6000 operating hours, it is almost as good as new. It served us as a training robot and over the past 10 years was used solely for stacking empty beer crates for practice purposes. The condition is very good. The attachments will be dismantled in advance. Delivery of the robot can be arranged at an additional cost if desired. You are welcome to inspect and test it at our premises. Hodpfx Afeynk D Ustefl

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating Cabinet Dimensions (approx.): Width: 1035 mm Hfjdpfx Ajg Hzqbsftol Depth: 800 mm + 210 mm pipe Height: 820

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, grinding length: 350 mm, grinding width: 160 mm, type of input current: three-phase, overall weight: 740 kg, rotational speed (max.): 2,900 rpm, power: 1 kW (1.36 HP), input voltage: 200 V, disc diameter: 250 mm, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-200M Year of manufacture:1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Hsdpfxjwvf Hbo Aftofl Maximum table length movement: 360 mm Maximum table length movement: 200 mm Table movement per handwheel revolution: 3 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electrical power: 2 HP 1 kW 4P 200V 3 phase Weight, approx. 740 kg

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t Hfodpjzy Satjfx Aftel dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit Hedpfex Nkp Iox Aftsfl • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: used, Year of construction: 2002, 200 kg Hedpfx Afszz S I Totefl The robot has not been tested and is being sold as a source of spare parts. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. Hedpfezrd Ruex Aftsfl A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 234S, total length: 2,400 mm, total width: 800 mm, total height: 1,255 mm, overall weight: 330 kg, input voltage: 400 V, type of input current: three-phase, power: 2.5 kW (3.40 HP), year of last overhaul: 2025, input frequency: 50 Hz, conveyor belt width: 200 mm, CRM NEXUS 200/1100 chop cutter for whole loins (section 195 x 200 x 1000 mm) 2011 machine, fully overhauled and refurbished in October 2025 Up to 170 slices per minute Cuts with bone Machine in perfect condition Equipped with a cover over the buttons for cleaning Hfodpfoxwdmyox Aftol

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Hfodpfx Afohnc E Ajtjl Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 50,000 h, Equipment: CE marking, documentation/manual, Trumpf TruBend V200 bending cell + BendMaster 60 Year of manufacture: 2004 Maximum pressing force: 2000 kN Maximum stroke: 365 mm Maximum operating pressure: 340 bar 1 unit B0401A0009 = BendMaster 60 1 unit B0106A0073 = TRB V200-6A 1 unit protective enclosure including lighting Hfsdjzrxfaopfx Aftsl 1 unit BendMaster track, 14 meters in 2-meter segments 1 unit Trumpf system control

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 Hfodpfx Aoxcuyhjftjl - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Hedpfx Afjzy Hhxjtofl Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: excellent (used), For sale: KSB ETABLOC G 32-200/752 centrifugal pump with electric motor. The pump has been inspected and is in fully working condition. It features a robust industrial design from the renowned manufacturer KSB, and is suitable for water, circulation, and various industrial applications. Technical data: Hedozvzvispfx Aftefl Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 No.: 0-118-902 133 Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Condition: used, inspected, and in fully working condition. It has normal signs of use and storage, as visible in the photos. The item for sale is a complete KSB pump with an electric motor, exactly as shown in the photos.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 mm with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500 mm. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Always used for thin sheets, max. 2 mm. A tapping head TU6 is included, but it displays an error message. Hjdszdc Iqopfx Aftjfl

Condition: ready for operation (used), Chip conveyor, chip transporter, Knoll 320 S-1/200, Used Machine Manufacturer: Knoll Type: 320 S-1/200 Overall Dimensions: Hedpfxextwqde Aftsfl Width: 6200 mm Depth: 1300 mm Height: 1610 mm Belt Specifications: 480 x 130 x 60 x 310 mm Belt Speed: 1.8 m/min Year of Manufacture: 2015 Discharge Opening Size: 550 x 530 mm Hopper Opening: 3120 x 410 mm Slat Pitch: 315 mm

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 480 mm, total height: 2,040 mm, total width: 1,750 mm, stroke length: 460 mm, total length: 5,177 mm, column diameter: 90 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 9,500 kg, clamping force: 2,000 kN, power: 18 kW (24.47 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Italpresse IP 200 SC die-casting machine, manufactured in 1997. Type: IP 200 SC Manufacturing number: 2449 Year of manufacture: 11.1997 Wiring diagram no.: 147081052 Operating voltage: 400 V Mains frequency: 50 Hz Auxiliary power supply: 110VAC–24VDC Control voltage inputs: 24 VDC Control voltage outputs: 24 VDC Power consumption: 18 kW Installed power: 23 kW Enclosure protection class: IP55 Hydraulic pump: Vickers 4525V42A17 – 86DD 22R Pressure accumulator TÜV certificate: Last inspection in 2018, next inspection due on 01.08.2028. In recent years, extensive investments have been made in the technology to ensure reliability: 2024: Installation of a new column including nut. 2023: Replacement of various wear parts (column wiper, slide rails/slide shoes including wiper) as well as complete seal kits for the closing cylinder and multiplier. 2021: Installation of new pump inserts for high and low pressure. The machine will be sold including a Gauss VS1 dosing unit with a separate, compact control panel and a gas-operated melting furnace with a 200-liter crucible and a Hindenlang gas burner (type HO-3). Original manual and complete electrical and pneumatic diagrams are available. Hodpfx Afjzlw N Rstofl The machine is currently still in active production. Since it is in operation, the operating hours cannot be read exactly, but an inspection under power is possible at any time by arrangement. The machine will be disconnected at the end of September / beginning of October. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2003, Capacity: up to 25.000 l/h Hfsdpfxoz Abico Aftjl

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings Hfsdew S Dmdopfx Aftel 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Hfodpfoyy Rtzjx Aftel Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Hodpfx Afszzrmpetefl Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Advanced Automation & Control Systems The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Hsdoxvpd Uepfx Aftofl Production Line Integration Capabilities This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: used, Year of construction: 2007, Attachment: Used chamber filter press, membrane filter press Type: Passavant Year of manufacture: 2007 Application area: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Filter cloths: available as an option, tailored to the medium Hjdszk E S Rspfx Aftofl Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are batch-operated pressure filters used for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our factory.

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0381, Offer 25147 Technical Data: - Portable design suitable for CrNi steels - Air flow rate approx. 200 m³/h - Max. negative pressure 19,000 Pa - Filter surface area approx. 0.8 m² - Filter separation efficiency 99.9 % - Extraction connection 60 mm - Extraction hose 5 m - Water-cooled torch package with extraction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan: 230 V / 1.1 kW Hsdpfx Afextatzetjfl - Required space approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Condition: good (used), Year of construction: 2013, VIKING MASEK ST 200 Stickpacker This 2-lane machine has a maximum output of 65 sticks/min and is designed for forming, filling, and sealing stick packs with powder. Bag width: 17 - 40 mm Bag length: 50 - 200 mm Fill volume: 0.2 - 100 ml Max. film roll diameter: 400 mm Max. film width: 400 mm Hfedpfxexvzanj Aftel Manufacturer: Viking Masek Year of manufacture: 2013 Space requirement: 120 x 250 x 260 cm