Used Hermes Diverse for sale (740)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas Kodpfjzvcknox Af Hjdt • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, functionality: fully functional, Various used conveyor belts in stock Belt widths: between 500 and 1,200 mm Axle lengths: from 2 to 40 m Kodpfx Afewm Nibs Hodt For all types of mineral bulk materials With and without supports, some with undercarriage

Condition: good (used), Year of construction: 2001, Greiner Thermorunner 4 for polypropylene (PP) and polystyrene (PS). Including heating station, forming station and cooling system. Kjdpsn Utzfefx Af Hedt * Punching force: 180000N * Production speed: max. 45 cycl/min * Sheet width min: 150 mm * Sheet width max: 560 mm * Sheet thickness min: 0.3 mm * Sheet thickness max: 2.5 mm This Thermoforming Line is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: used, Year of construction: 2009, machine/vehicle number: 09-0116, Cardboard labeling HERMA DS Ksdpfsz Ablqjx Af Hedt

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,295 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. • Machine Type: Universal Milling Machine Kodpfxezbu I De Af Hodt • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Kdedswp Ac Hepfx Af Hst Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hermle U1130 5-Axis Very good condition! Available immediately! Operating hours: 35,500 h spindle hours total: only 11,000 h Maintenance measures in 2018: machine rebuild, drive, spindle: for €30,000 Travel: X-1130 mm, Y-720 mm, Z-630 mm Kjdozych Uepfx Af Hsdt table size: 1300 x 720 mm max. table load: 700 kg NC rotary table: 800 mm diameter, 20 rpm B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert Kdjdpfx Aopbihvef Hst -Filter elements: air filter 100 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H940 mm -Total weight: 136 kg

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: NETZSCH TDW 4240, For sale is a used NETZSCH TDW 4240 hot box test chamber from our testing center. This system is used to determine the thermal transmittance or thermal transmittance coefficient (U-value) of components and structures under defined temperature conditions. Typical applications: Windows Kdsdpszwf T Iefx Af Hot Doors Facade and wall elements Panels and sandwich structures Other building envelope components Corresponding test openings are available for testing windows and doors. The system is particularly suitable for testing laboratories, research and development facilities, and manufacturers of windows, doors, facades, panels, and other construction products who wish to investigate the thermal properties of their products. Due to a realignment of our testing capacity, the hot box is being sold and can be acquired under very favorable conditions. Dismantling and transport: The system is currently located at our testing center. We would be happy to assist the buyer with dismantling, loading, and organizing the transport, as well as answer any questions regarding re-installation, and we can work together to find a suitable solution. An on-site inspection of the system is possible by appointment. We will gladly provide further technical information, photos, and documents upon request.

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Technical data: - Markierung: Ohne oder MEC - Bore: 40 mm Kdedpezryn Aofx Af Hot - Weight: ~100 kg

Condition: excellent (used), 091 USED Miwe Thermo-Static thermal oil ovens. EQUIPMENT: - 4 thermal oil ovens, 10 levels (height between shelves: 17 cm) - heating boiler - gas burner Kdodpfozx Hd Dox Af Hot - 60x80 cm trolleys - 40 pieces - chimneys - steaming: each oven has its own steaming system Year of production: 2 ovens 2003, 2 ovens 2008 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. Kjdpfx Afsznbp Ts Hedt The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price. Kdedpfew Hxgvjx Af Hot

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Ksdoq Nn Hcepfx Af Hedt Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: good (used), Year of construction: 2014, Various staircases – used: Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Kdjdpfx Afozqz Sao Het Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Condition: good Available: approximately Q4/2026 Location: Hamburg

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). Kdodszlccijpfx Af Hjt The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 26, color channels: CMYK + White + Varnish, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 3,200 mm, paper height (max.): 50 mm, total width: 3,200 mm, counter reading (color): 1,328, year of last overhaul: 2025, type of input current: AC, input current: 15 A, input voltage: 240 V, We offer this used Liyu DSJ3204 UV HYBRID Digital Print Machine, year of construction 2022. Model number: DSJ3204 Year of manufacture: 2022 Serial number: M33DB0012C0E0 Net weight: 2400 kg Voltage: 200-240 V Current: 15 A Power consumption: 3300 W Frequency: 50 Hz Country of origin: China €63,900 including dismantling at our location and setup at the buyer's site by manufacturer Liyu Price is subject to negotiation (Transport to the customer and unloading at the customer's site are to be organized and are the responsibility of the customer/buyer.) Liyu Platinum EQ3 LED Hybrid Flatbed and Roll-to-Roll UV Printer Condition: Lightly used and in excellent condition Flatbed and roll-to-roll printing INCLUDES 3 mm aluminum composite panels 3050 mm x 1500 mm approx. 24 pieces INCLUDES 3 mm foam board 3050 mm x 2030 mm Kdodpfx Aey Nl E Ref Het approx. 160 pieces Includes 26 unopened 1-liter bottles of UV ink Printed output approx. 1328 m² as of May 6, 2026 The Platinum EQ3 hybrid printing press is a state-of-the-art machine that meets the demands of modern printing. This machine boasts a wide range of features that enable users to complete their tasks more efficiently. The convenient dual-sided material feed accelerates the workflow and saves time and effort. Furthermore, the 4-zone vacuum system ensures that the material is securely held in place – resulting in higher print quality and a reduced risk of material shifting. Collision and safety sensors play a crucial role in workplace safety. They detect potential collisions and protect both the operator and the machine. The Platinum EQ3 Hybrid can print on materials up to 50 mm thick, opening up a broad range of application possibilities. This flexibility allows for the processing of a variety of materials for diverse projects. The automatic material height measurement system facilitates the precise adjustment of material parameters for accurate printing results. This feature not only improves print quality but also reduces material waste. Number of printheads: 6 RICOH GEN6, 6pl Printheads can be upgraded by speed up to 16 printheads. Inks: Currently CMYK, White, Vanish Print resolution: 1200 dpi Print speed (maximum): 180 m²/h Flow height: 50 mm Color gamut: CMYK + White + Light + Luminaire + Varnish Ink types: UV LED Drying system: UV LED Accessories: Includes inks (Cyan x 1, Magenta x 3, Yellow x 1, Black x 3, White x 2, Varnish x 3, Cleaning Solution x 3, each in 1-liter containers) and cleaning wipes. Further pictures and videos available upon request. For greater distances, a viewing can also be conducted via live video.

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert -Filter elements: air filter 80 pieces Kjdspbihyjpfx Af Hodt -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H870 mm -Total weight: 123 kg

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert -Filter elements: air filter 120 pieces Kdedpfxepbig Ao Af Hot -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H900 mm -Total weight: 151 kg

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert -Filter elements: air filter 65 pieces -Type: Different types from different manufacturers Kdedjpbihnjpfx Af Het -Price/tax: complete -Transport dimensions: 1200/800/H900 mm -Total weight: 126 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,310 mm, total width: 2,504 mm, table width: 528 mm, table length: 900 mm, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 40, product length (max.): 2,310 mm, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Working hours (from display): Kedpfx Asy H Irbsf Hjdt • Control on: 68,311 h • Machine on: 65,234 h • Program run: 13,572 h • Spindle Speed Range: 20 - 7000 rpm (stepless) • Taper / Tool Holder: SK 40 (similar to DIN 2079 / DIN 69871 / DIN 69872-19) • Tool Clamping: Hydromechanical (Clamping Force: 10 kN) • Spindle Diameter Front Bearing: 55 mm (Horizontal/Vertical 80/55 mm) • Feed Rate (X, Y, Z): 1 - 2000 / 15000 mm/min • Feed Force (80% Duty Cycle): 8000 N • Rapid Traverse (X, Y, Z): 15 m/min • Table dimensions: 900 x 528 mm • Swivel Range Spindle Head: 0 - 90° • Quill Stroke (Manual): 75 mm (Quill Diameter: 100 mm) • T-Slots: 7 slots, Width 14 H7 mm, Pitch 63 mm • Tool Changer: Vertical Tool Changer HTC 16 (16 pockets) • Noise Level: 75 dB (A) • Total Floor Space Requirement: 5.00 m² • Floor Load: ca. 964 kg/m² Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2014, For sale: a professional Nabertherm L40/12 muffle furnace with a working temperature of up to 1200°C. Ideal for ceramics, laboratories, heat treatment of metals, sintering, sample roasting, and many other applications. Model: L 40/12 / B180 Power: 6 kW Power supply: 400 V Max. temperature: 1200 °C Chamber volume: 40 liters Kdodpfxjzb Iv Us Af Hjt Year of manufacture: 2014 Condition: Functional, heats up properly Weight: approx. 70 kg

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: Kdsdpfjzx Rvksx Af Hot - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, mileage: 12,94,249 km, power: 290 kW (394.29 HP), first registration: 01/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, * Multifunction steering wheel * Radio * Air conditioning * Auxiliary heater * 2 sleeping berths * Cruise control * Retarder * Full air suspension * Roof hatch ----Internal vehicle number: 9680-----Subject to prior sale and errors WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us easily via WhatsApp Whatsapp Whatsapp Kodevyx Aljpfx Af Hsdt

Condition: used, Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 157 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H500 mm -Total weight: 162 kg Kdedpfxon Srv Do Af Hjt