Used Hidrobrasil Hydraulic 400 To Column Press for sale (50,525)

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm Nljdpfx Absyfwxtj Ueg - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW Nodpeyfwywefx Ab Ujlg weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation Njdpfxoyz Dr Tj Ab Ujlg - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW Njdpfx Aboyif Nro Uelg weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm Njdpoyz Dtdjfx Ab Ujlg - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Nljdpfezf Ilcex Ab Ueg Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg.

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm Nsdpjlp U Hgsfx Ab Uslg ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Nodpozqzcrofx Ab Uelg

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW Njdpfx Aou Nfvuob Uolg weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm Njdpovnwfbefx Ab Uelg table height 1050 mm tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg Nledpst Hw E Isfx Ab Ujg dimensions of the machine ca. 2000x2400x3650 mm

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m Njdpfx Aexcblwsb Uelg

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m Nedpjfxyirofx Ab Ujlg draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Nlodjdzqptspfx Ab Ujg Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: good (used), Press force: 200 tons Nodpfxjgvz Hxs Ab Uslg Table: 1500x1000 mm Motor: 45 kW Weight: 18,000 kg Frame width: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Condition: used, Year of construction: 1985, pressure 63 t Nlodot Hwxuspfx Ab Ujg passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Nedpfx Aet Hwuijb Uslg

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m Nledpst Hwpyofx Ab Usg

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Njdpfx Aju Nfmajb Uolg Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Year of construction: 1990, condition: used, pressure 100 t throat 275 mm stroke 150 mm table surface area 860x550 mm ram surface 600x400 mm Njdpjlp U Tuefx Ab Uslg table height 810 mm tool hole in ram Ø 50 mm dayligth max. 475 mm weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 2000x2500x3300 mm

Condition: used, Year of construction: 1991, Technical details: Nlodpfju Nfp Iox Ab Uog pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Year of construction: 1994, pressure:100 t Nledpfot Hmk Hjx Ab Uog throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V weight of the machine ca.:4 t

Condition: used, Year of construction: 1992, pressure 300 t passage width 1350 mm stroke 500 mm Nljdjvn U Sropfx Ab Usg column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm total power requirement 45 kW weight of the machine ca. 20 t dimensions of the machine ca. BxTxH 2500x2000x3950 mm

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW Nledpfxefxyh Hj Ab Ujg weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Nlsdpfecmat Usx Ab Ujg the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions