Single Column Press - Hydraulic

WMW Zeulenroda PYE 160 S1

Condition: new, Year of construction: 2026, machine/vehicle number: 06-26-005, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 360 mm, ram plate width: 750 mm, ram plate length: 450 mm, distance table to ram: 800 mm, total length: 2,200 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic single-column press PYE 160 S1/M >completely overhauled / CE marking with  24 months warranty< from the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE conformity Ram stroke: 500 mm Clamping plate, press table: 900 x 580 mm with customer-specific clamping arrangement One-piece C-frame press in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, twist-proof 3-sided protective guard, on the operator side via light curtain, on the side via sliding guard elements SIEMENS control system -new- Conversion to electronic stroke measuring system Remote maintenance ----- Further services, plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touchscreen / visualization SIEMENS • Two-hand control unit with two-channel monitoring of the two-hand synchronous circuit on the press table, (incl. 5m cable) Rjdpfxezf Ht Ss Afhocd • Limit switches for stroke adjustment are replaced by initiators • Monitoring of the initial stroke after completion • Replacement of the existing 60-V DC solenoids on the pilot control valves with 24-V DC solenoids, including the necessary intermediate plates • The press has an electronic stroke measuring system (including teach-in function and display of the current ram position). This eliminates the mechanical cam switching mechanism. Hydraulic system • Hydraulic safety block for monitoring the closing movement on the main cylinder • Position-monitored directional control valve for the up and down movement of the ram • Replacement of the motors of the main and control pump • Replacement of the seals on the main cylinder • Fine filter with contamination indicator • All installation and piping work New documentation including CE declaration of conformity Delivery time / Implementation time: approx. 5 months

Condition: good (used), Year of construction: 2011, Control system: Siemens 840 D pl X-axis 650 mm – Y-axis 600 mm – Z-axis 500 mm A-axis +- 115° - C-axis 360° Redpfxszint Ij Afhocd Spindle 18,000 rpm, power 13 / 10 kW, tool holder HSK-A63 Tool changer 32 tool positions - additional magazine 87 positions NC rotary table ø280 PW160 with pallet clamping system, automatic cabinet doors, hydraulic and pneumatic extension, pallet changer PW 160-400x400 mm, pallet storage system control 3D tool radius correction, A-axis standard version, A-axis position offset Internal coolant supply 80 bar, includes: KNOLL paper band filter, KNOLL chip conveyor, standard coolant system, clean air supply for measuring probes, machine bed flushing, scraper conveyor Air blast through the spindle center, manual cabinet roof, laminated safety glass, rotating clear window, electric thermal compensation, electric manual control module, measuring probe Renishaw incl. BLUM tool breakage/measurement, chip flushing gun 7 pallets 400/STM190 with thread drilling grid Oil mist extraction system LTA, technical documentation (German) Total spindle hours: 18,667 h, new spindle in 2025 at 16,560 h.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Rsdsqy E I Repfx Afhjcd

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Rcodpfx Asw D Awmofhjd dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 Redpjyw Tddefx Afhscd A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Rsdpfxed Anz Ro Afhecd Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm Rodpfx Ajcxxx Rsfhecd weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - Rcjdpfxsy H Irus Afhed - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW Rcjdox Ii Hvepfx Afhjd CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. * Redjw S Efzopfx Afhjcd