Used High-Speed Counter 25/500 Khz for sale (59,592)

Condition: refurbished (used), Repair of speed control board Hsdpfx Agsy Rfzueusn

Condition: excellent (used), Year of construction: 2005, Ref: 11098 . 2005 Muller Martini ‘Corona CC-12’ EVA / PUR High Speed Perfect Binder. Excellent condition! Only 36,800 hours worked! Comprising: 36 x 3695/24” top loading feeders with sequential stop/start + handfeed station ‘ASAC’ copy control system with 3714 downstream shut-off element Jogging unit 3643 and Spiral Raceway element 3641 M.M. automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval, menu-guided set-up and on-the-run adjustment Book transfer section with 25 kW drive motor M.M. ‘Corona CC12-23’ with 22 x 23” Combi-clamps Spine preparation units with cutting/milling/sanding/brushing Interchangeable spine gluing units, comprising; ICS30 EVA hot-melt side glue pre-melt tank 30 ltr. ICS80 EVA hot-melt spine glue pre-melt tank 80 ltr. PUR pre-melt unit PUR spine glue unit EVA hot-melt spine glue unit EVA hot-melt side glue unit Stream cover feeder with nipping Lay-down delivery unit to: Flat conveyor system (details on request) to: NO TRIMMER (trimmer can be found and added) Specification: Hodsy Ib S Repfx Aguon 3695/24" Gatherer - sig. sizes, Max: 500 x 320 mm Min: 140 x 100 mm CC12/24” Binder book sizes, Max: 510 x 305 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 80 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 12,000 cycles/hr.

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm Hjdpfxoyz Dtds Agusn - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: excellent (used), Year of construction: 1983, bore capacity in steel (diameter) 32 mm Hjdpjwvl Irefx Aguon arm length 636 mm workpiece height max. 720 mm spindle turning speed range 38 - 2000 U/min threading 38 - 643 stroke 450 mm spindle stroke - max. 170 mm total power requirement 6 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m Left / right rotation.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Hodox Hgkvjpfx Aguen Quick-change holder with inserts Machine vice

Year of construction: 2019, condition: excellent (used), The Smipack FP6000CS is a high-speed, fully automatic L-bar sealer. Featuring continuous sealing ("CS") and a motorized center seal, it excels at packing a wide variety of items with centered high-quality seals. The "CS" designation signifies the addition of a motorized center seal that adjusts the longitudinal seal to the vertical center of the product Machine Type: Fully automatic L-bar sealer Sealing System: Continuous sealing ("CS") with hot knife / PTFE-coated blade Sealing Bar Dimensions: 640 mm 510 mm Max Pack Height: Up to 200 mm \ 7.8 inches Max Foil Width: Up to 600 mm Production Output: Up to 3,600 packs per hour (depending on product size and film used) Hjdpsy Synfjfx Agujn Conveyor Speed: 10 to 30 m/min, electronically adjustable via inverter Power Supply: 220 - 240 / 380 - 415 V | 3PH + PE / 3PH + N + PE | 50/60 Hz Installed Power: 3,350 W Usable Films: Polyolefin and Polyethylene up to 30 mu

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm Hodpfx Ajvygxnegujn With 14 collets Clamping range 2 - 15 mm

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Hsdpfxevygzio Agujn Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Max. speed 15,000 rpm Hsdpfx Aewz I Tbsguon Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Falch T5H, 500 bar, 30 l/min, 2006, 963 operating hours Hedpsy Dvmusfx Agusn

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Hjdpfew S Hv Iex Aguon Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Hsdpfx Agevmfzheuen Extended machine accessories Tool changing cart

Condition: used, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Hjdjw Hg S Topfx Aguon Dimensions L x W x H: 3.900 x 1.400 x 3.065 Weight of machine approx.: 9 ton

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Standard configuration Hsdpouqc Ngofx Aguon With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Hjdpfxouqdzde Agusn Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: used, Year of construction: 1990, machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Hedpouqc Ezjfx Aguon Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Condition: used, Year of construction: 1980, machine/vehicle number: 130861, Press capacity: 50 ton Hodpfx Ageuqc Hljuen Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Hjdpfxjuqd Abs Agusn Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Hodpfxjuqc I Ae Agujn Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5 Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm 

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Hsdpfxsw Tuqps Agujn Main Motor: 11 kW Extended machine accessories Die lifters with balls for die change IMCO Press force measurement Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm

Condition: used, Year of construction: 1981, machine/vehicle number: 104680, Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hedpfeuqcwdjx Agusn Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Hjdpfxouqc Agj Aguen Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Hsdpfx Agjvmfznjujn Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hodsyxnzaopfx Aguon

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min Hsdjvylh Uepfx Agujn voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm