Used Hood Shrink Machine Ev for sale (66,576)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, 30 packs/min – Siemens Simatic OP7 Shrink wrapping and bundling machine suitable for cosmetics and small packaged products. The machine forms bundles and wraps them in film, followed by a shrink tunnel for tight packaging. Equipped with upper and lower film reels and a manual film splicing system. The shrink tunnel features a cooling section at the exit and adjustable speed control. The machine accommodates different product and bundle formats and is supplied with documentation. Maximum output: 30 packs/min Hinge chain conveyor width: 80 mm Shrink tunnel conveyor width: 480 mm Control panel: Siemens Simatic OP7 Film system: Upper and lower film reels with manual splicing Shrink tunnel: With cooling section at the exit Speed control: Adjustable Product size (min / max) Nedpfjyt Hiqsx Ab Ujdb Length: 50 – 100 mm Height: 100 – 300 mm Width: 25 – 60 mm Bundle size (min / max) Length: 75 – 330 mm Height: 100 – 300 mm Width: 50 – 100 mm Additional information Overfeed system included Upper and lower film roll holders Documentation available

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Ndjdpevvlyiofx Ab Usb Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: as good as new (ex-display), Year of construction: 2024, THE “GIANT” OF SHRINK PACKS Here is the Dibipack 85130 model, a new addition to the Italdibipack range of EXTRA-LARGE “One-step®” systems, theDibipack BIG, the largest models in the Dibipack range, conceived and designed to offer the best answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels TECHNICAL SPECIFICATIONS TECHNICAL DATA – DIBIPACK 85130 Voltage supply: 400 V - 3 Ph + N Maximum required power: 8 KW Overall dimensions of the machine L x W x H: 2700 x 1500 x 1400 (H) mm Worktop height (on stand): 900 mm Machine weight: 300 kg Sealing area W x L: 850 x 1300 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Nsdpemv Engefx Ab Uedb Maximum roll dimensions DIA x B: 250 x 1200 mm Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging. MORE INFORMATION An excellent result obtained by the Italdibipack Research and Development team, which gathered all the market needs and transformed them into a successful solution. With this new “giant”, the Dibipack 75125 and Dibipack 85150 models are “retired” thanks to the new dimensions of the sealing bars (850 x 1300 mm) that can accommodate a larger range of dimensions of the product. This new model has the same specifications as the shrink wrapping machines of the Dibipack line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better heat circulation. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM). The machine is manufactured in accordance with CE regulations.

Condition: used, Year of construction: 2014, For sale is a semi-automatic packaging line from MINIPACK-TORRE, consisting of a Modular 70 Digit L-sealer and a Tunnel 70 DG shrink tunnel. Ndsdpfx Aszg Ezdob Uob The equipment is used but in good condition. Both machines operate as a single set and are designed for professional packaging of products in heat-shrink film. Ideal for industrial enterprises, logistics centers, warehouses, and packaging of electronics, metal, wood, food, and other products. The set includes: 1. L-sealer Manufacturer: Minipack-Torre (Italy) Model: Modular 70 Digit Year of manufacture: 2014 Voltage: 380 V Frequency: 50 Hz Power: 2.3 kW Features: Semi-automatic operation L-shaped (corner) sealing and cutting of the film Digital control panel Simple parameter adjustment 2. Shrink tunnel Manufacturer: Minipack-Torre (Italy) Model: Tunnel 70 DG Year of manufacture: 2014 Voltage: 380 V Frequency: 50–60 Hz Power: 13.5 kW Features: Hot air circulation Uniform film shrinkage Adjustable conveyor speed Adjustable tunnel temperature Applications Perfect for packaging various products in shrink film: metal products; electronics; wood products; boxes; spare parts; food products; industrial products. Reliable Italian equipment that ensures fast, aesthetically pleasing, and professional packaging. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Ndjdpfxoztwl Is Ab Ueb

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Ndedpfxjkn Rz Hs Ab Ueb Height: 1850 mm

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Ndjdpox D Tbmefx Ab Ueb Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of manufacture: 1973 Njdpsxzy Riefx Ab Uedb Shrink film oven 250°C Heating: fuel oil / gas / electric 3.5 kW 380V Combustion chamber: 2,000 x 1,800 x 2,100 mm (L x W x H) External dimensions: 2,900 x 2,100 x 2,600 mm (L x W x H) Fully functional

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Ndsdpfew E Igvex Ab Usb Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Year of construction: 2002, condition: ready for operation (used), Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. Ndsdpfsh Rykuex Ab Usb

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Nedpfx Aoz Arh Aeb Uodb Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: new, functionality: fully functional, Automatic L-sealer AMTEC SPEED 40L PRO including high speed shrink tunnel AMTEC POF-L HS Nsdsv Hrd Nspfx Ab Uedb PRO-version of vertically working L-bar shrink wrapper. Max. speed of the machine in neutral: 40 cycles/minute; max. product dimensions (mm): L(60-560)xW(60-430)xH(10-180), W+H max. 500mm. Power supply: ~220V, 50Hz; Power consumption: 3kW; Compressed air required: max. 0.6MPa; Compressed air consumption: 0.4m³/min; Dimensions: L3250xW1530xH1550mm. PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Speed: max. 30m/min; product dimensions (mm): W400xH300. Power supply: ~380V, 50Hz; Power consumption: 18kW; Dimensions: L1980xW1300xH1520mm.

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. Ndjdpswth Dqefx Ab Usb - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: new, Year of construction: 2025, Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker). Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.0kW; compressed air not necessary; max. speed of the machine in neutral: 8 cycles/minute; max. product dimensions (mm): L450xW300xH200; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1380xW690xH1065; weight (net/gross): 125/175kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ndedpfx Asv Nly Nob Ueb

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Njdsw Ddb Tspfx Ab Ujdb Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2535, type of input current: three-phase, product height (max.): 150 mm, product length (max.): 450 mm, product width (max.): 280 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, width of welding knife: 480 mm, length of welding knife: 380 mm, overall weight: 750 kg, year of last overhaul: 2018, energy consumption: 8 kWh, Neatly refurbished packaging machine with shrink tunnel. Possibility to test run at our location. Maximum speed of 30 pieces per minute. Maximum single fold film width 600 mm. Transport not included. Ndodpfjwutu Rjx Ab Ueb

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Year of manufacture: 2017 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Electrical connection: 400 V three-phase Rated current: 7.2 A This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Njdpfexl Dp Dox Ab Usdb Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: excellent (used), Year of construction: 2017, Power 13 KW Ndjdsxx A D Hspfx Ab Ujb clamping range 500 mm voltage 400 V

Condition: used, Year of construction: 2002, Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping. Additional title: Five‑step machine Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible Nedpfx Ajy Nm Rueb Uedb Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

Year of construction: 2008, condition: good (used), KARVILLE Tornado 2500 – overhauled in 2020! Nodevxkatopfx Ab Ujdb Year of Manufacture: 2008 _____ Machine Specifications and Equipment: Tornado - Electric Tunnel The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam is not acceptable. The Tornado provides the best solution for:  Shrinking for Difficult Shaped Containers  Shrinking for Water Sensitive Products  Shrinking for Heat Sensitive Containers like PET  Eliminating after-shrink wrinkles  Saving Energy - High Efficiency Design  Saving Space - No Need for Extra Leister Guns and Special Rotation Systems  Minimizing Mechanical Maintenance - Simple Machine Structure  Eliminating the need for Steam Boiler and Infrastructure. This is ideal for blow molders, contract packers and thermoformers. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: used, functionality: fully functional, Kallfass shrink wrapping machine – indestructible and fully operational Nsdpfx Abexz Tryj Usdb

Condition: good (used), Italdibipack Mecpack FS + FornoTouch 5525EV Sealer with Shrink Tunnel Ndsdszur Dhspfx Ab Ujb Made in Italy. This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the shrink tunnel, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 600 x 500 mm Tunnel entry dimensions: 550 x 250 mm Weight: 770 kg Power supply: 380V Installed power: – sealer 2.5 kW, – tunnel 7 kW. Capacity: approx. 2,400 pcs/h Includes a short roller conveyor for product removal.

Condition: good (used), For sale is our Minipack FM76A hooded shrink wrapping machine. Type: FM76 A EVO Year of manufacture: 2018 It features a sealing bar of 540 x 390 mm, achieves a performance of up to 700 units per hour, and is ideal for efficient, space-saving shrink wrapping in commercial and industrial applications. Ndodsz Eiarepfx Ab Usb Technical data: Sealing bar: 540 x 390 mm Max. product size: 500 x 380 x 200 mm (up to 15 kg) Hourly output: 0–700 units/h Power supply: 200–400 V (3 phases) Machine weight: approx. 174 kg

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I Ndodsyilyqjpfx Ab Uob YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Year of construction: 2008, condition: excellent (used), Power 13 KW Nedpexx A Edjfx Ab Uodb clamping range 500 mm voltage 400 V