Used Maximat Super 11 for sale (14,023)

Condition: good (used), turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW Isdpjyz Dg Refx Agyoih dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Very well maintained Punching force 45 t Incl. various punching dies Isdpfx Agjyg D Nnoyeih

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives Iisdpfey D I I Rox Agysh 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm Ijdpfx Asyh Rnkjgyoih flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 44006 302 01 01, overall weight: 1,400 kg, total length: 1,800 mm, total width: 1,800 mm, total height: 2,000 mm, Profile steel cutting machine Peddinghaus 210 Super 11 Availability: Immediately - by arrangement Can be inspected while powered: Yes Technical data: Voltage: 220/380 V Rated current: 10/6 A Fuse rating: 20/16 A Type of current: 3-phase Frequency: 50 Hz Motor: 8.3/4.8 A Scope of delivery: Accessories as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 1800 x 1800 x 2000 mm Weight approx.: 1400 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. Iiedpfx Ajz Hlhbjgyjh ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Iodpoz N H Enjfx Agyjih Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, mileage: 6,23,000 km, first registration: 05/1971, fuel type: diesel, axle configuration: 2 axles, color: grey, gearing type: mechanical, Year of construction: 1971, Equipment: ABS, electronic stability program (ESP), SCANIA 110 SUPER WITH TURBOCHARGER THREE-WAY TIPPER TRUCK 2 UNITS AVAILABLE --- VEHICLE HISTORY: * ENGINE IS DRY AND DOES NOT LEAK OIL VEHICLE EQUIPMENT: * THREE-WAY TIPPER * MANUAL TRANSMISSION Iodporyrk Rjfx Agysih * ENGINE BRAKE * TURBOCHARGER * PTO (POWER TAKE-OFF) * PERMISSIBLE GROSS WEIGHT: 18,000 KG * CURB WEIGHT: * PAYLOAD: * IMMEDIATELY READY FOR USE --- * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) --- EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES AVAILABLE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU & third countries, a deposit of at least €500 / €1,000 will be charged. Subject to alterations, errors and prior sale! More vehicles available on our website. Sales exclusively according to our General Terms & Conditions – see homepage. Important note: Despite careful verification of all details in our offer, errors may occur. Some may be caused by data transmission errors from various platform providers. Therefore, we point out all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB, but rather serves as information for the initiation of a contract. All information provided is without guarantee and does not constitute warranted characteristics.

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm Iijdov A It Sspfx Agyeh > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Condition: used, mileage: 6,25,000 km, first registration: 05/1971, fuel type: diesel, axle configuration: 2 axles, color: grey, gearing type: mechanical, Year of construction: 1971, Equipment: ABS, electronic stability program (ESP), SCANIA 110 SUPER WITH TURBOCHARGER THREE-WAY TIPPER – 2 UNITS AVAILABLE --- VEHICLE HISTORY: * Engine is dry and does not leak oil VEHICLE EQUIPMENT: * Three-way tipper * Manual transmission * Engine brake * Turbocharger * PTO (power take-off) * Permissible total weight: 18,000 kg * Curb weight: * Payload: * Immediately operational Iiedpfstp Sabsx Agyoh --- * Export sales only with deposit (minimum €500 – €2,000) --- Export declaration/customs EXW possible within 10 minutes (authorized exporter) 5-day, 15-day, 30-day license plates and 15-day Austrian license plates available EURO 1 Technical data sheet (Dati Tecnici) Vehicle reservation requests exclusively via the email function Verbal reservations are not valid For sales to EU and non-EU countries, a deposit of at least €500 / €1,000 will be charged. Subject to change, errors, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our terms and conditions – see homepage. Important Note – Important Information: Despite careful inspection of all details in our offering, errors may occur. These may partially result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes for contract initiation. The specifications provided here are without guarantee and do not constitute warranted characteristics.

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm Iodpfjin Nrgox Agyjih total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: Iodpoz Sngasfx Agyjih * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Iiedsy Ipp Rspfx Agysh Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm Iijdpfx Asz Nwapogyoh - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck.

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Key Features: Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Iisdpfx Agsxv Dpxeyjh Weight: 1.75 kg Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Aspirating heads (stainless steel or disposable) Tripods and stands Calibration adapters USB data cable (for models with digital logging)

Condition: reconditioned (used), functionality: fully functional, working width: 530 mm, overall weight: 46 kg, warranty duration: 12 months, HAKO SUPER 53/1100 SINGLE DISC POLISHER The 530mm cleaning head is equipped with a pad holder and a medium-hard pad, allowing work on any surface. Isdpfx Aeztbb Hsgysih Easy pad pressure adjustment using a knob. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor guarantees uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 530 Rotation speed (rpm/min): 1100 Power consumption (W): 1800 Weight (kg): 46 Cable length (m): 20 INCLUDED: 530mm pad holder with CenterLock mounting bracket 530mm cleaning pad - red 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (530mm) ensures high surface coverage. The control panel is very easy to read and intuitive.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, The RM Super Rain 890 GX 110/550 is a hose reel irrigator (reel system) from the Super Rain / GX series by the Italian manufacturer RM Irrigation. The designation 110/550 refers to a hose with a diameter of 110 mm and a length of 550 m. It is designed for irrigating large agricultural areas. Iiedpexgha Nefx Agyjh

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3, manual adjustment up/down, left/right - spindle 2, manual adjustment left/right - spindle 2, electric adjustment up/down - spindles 2 and 3 are equipped with brakes from above: - 3 feed rollers, pulling, metal toothed - 1 double output roller, pulling, rubber from below: - feed pressure roller - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness Ijdpfx Aozxq I Hogyjih - stepless adjustment of feed speed 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the feed table 1970mm - automatic lubrication system for the table - diameter of the dust extraction outlet 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ADVANTAGES – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition – used planer Net price: 115900 PLN Net price: 26960 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm Iedpfsyatffox Agysih - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: Ijdpfx Ajz S S Elegyeih C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED Iedpfx Agjz Rnwbsyoih

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Tool grinding machine EWAG WS 11 INCLUDED EQUIPMENT: x1 infeed Z-axis : Infeed operation, metric 4 C x1 Cross feed X-axis 4 Q-M x1 grinding stroke 3H : operation of the grinding stroke either by lever or by hand wheel - ref : 111-2-15167 (WS11) x1 grinding spindle Q 36-12, complete 9 JKP x1 workhead spindle with W25 collet reception x1 foot switch 9 M - operation of infeed Z-axis by foot peadal. Infeed stroke steplessly adjustable x1 ISOMA microscope - optic from the front x1 measuring table for microscope x1 ISOMA microscope - optic from the top x1 SIEGFRIED STTV acoustic touch control (grinding wheel to workpiece) in is case x7 grinding wheel flanges Various CBN grinding wheels Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Iisdoz I Tbxopfx Agyoh The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: used, functionality: fully functional, Nitto punching tool with crane. Iijdpfx Agsz Szg Soyeh

Condition: good (used), functionality: fully functional, Super Soco TC Electric Motorbike With increased battery charge time, increased speed and increased range, the TC is a fantastic all-rounder electric motorbike with the looks and practicalities to deliver. Iedpfx Aev U El Njgysih Capable of 28mph with a 45 mile range, the Super Soco TC is well suited to become your daily inter city commute. The battery easily removes to be charged at work or at home over a 6 hour period. With no gearing thanks to the electric motor, this automatic "twist and go" bike is extremely easy to ride. A large display gives excellent visibility of speed, range, battery levels and driving mode at a glance without compromising on retro looks. The 3000W Bosch motor gives smooth acceleration up to 28mph in luxurious silence. Keyless, the TC has been designed to protect against theft. Starting the bike is the push of a button. A lightweight frame makes handling not only easy, but extremely good fun. Powerful front LED lights offer illumination for both you and other road uses. Hydraulic double piston brakes give safety and control in all conditions. Good working condition. Please check out our other listings as well

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST Iedpfx Agjz Eg Dzoyeih

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s Iijdpez Nxwijfx Agyeh • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40