Used Hosokawa Alpine Picoline (Rental Machine) for sale (66,301)

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Ppodpfx Aet Ity Djndow Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. Pjdoy Uiyvopfx Andepw The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Ppjdpfjy Ugtaox Andow Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Pedpoznkkaofx Andopw Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Pedpfxsy Uc Nkj Andopw Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Year of construction: 1965, condition: used, Manufacturer: Alpine Model: 400 Z Year: 1965 Type: Pin mill Rotor diameter: 400 mm Engine power: 22 kW ATEX classification: Ex II2G Ex daIIC T4 Maximum permissible speeds of drive shafts: 2,500 – 7,500 rpm Psdpfozmi Hkox Andjpw Materials : House : Cast iron Rotor / Stator: Stainless steel Door with minor warping taken into account during refurbishment (suitable seal fitted, tightness ensured)

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. Ppsdpfx Ajq Nd U Hondew 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. Pedoq Nx Apepfx Andepw For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: Ppedoq Nxz Dspfx Andew - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Technical data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good condition (refurbished), with newly built control cabinet Pedpfx Ajvn Riajndopw Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC Ppodpfx Aneyahv Sodsw CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Psdszbuhdspfx Andjpw

Condition: ready for operation (used), Year of construction: 1991, Turning lathe, VOEST-ALPINE-STEINEL, Type: DA 180, Year of manufacture: 1991, with 2-axis digital display ELESTA. Center height: 180 mm Ppedpfx Aeziwy Rondjw Distance between centers: 1000 mm Spindle bore: 52 mm Spindle speeds: 44-2000 rpm Chuck diameter: 200 mm, Tool holder: MULTIFIX - B. In ready-to-use condition.

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Pedpoy Ndqrofx Andspw Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Ppodpjzdazbjfx Andjw Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Ppodpfxszdayqj Andow Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Podsv S Dk Sopfx Andepw Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Ppjdpjv S Dihefx Andsw We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Ppsdpev Sa I Tjfx Andew In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: excellent (used), Hosokawa Powderplex APP 400 size reduction and screening mill Drive power: 37 kW Motor speed: 3000 rpm Pressure surge resistant up to 10 bar (g) Pjdpohbq Urefx Andspw Additional screening wheel In very good, operational condition, directly from production!!!

Condition: excellent (used), Year of construction: 1995, Maximum distance between centers: 1,000 mm Diameter over lathe bed: 410 mm Spindle bore: 54 mm Taper for tailstock: MK 4 Machine weight: approx. 2.1 tons Ppodezd S Daepfx Andew Includes: 3-jaw chuck Includes: Multifix quick-change tool holder Includes: Live center

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Ppodpfszlpgnsx Andow

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm Ppjdpfx Aoy Nd Siendow turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Podpsyhdi Rofx Andspw Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 37 W, torque: 1,450 Nm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, Voest Alpine Steinel Lathe WNC 500 S x 1000 Turning diameter: 500 mm Turning length: 1000 mm Control system: Sinumerik 810 T-GA 2 2-speed gearbox i = 4 Power: 37 kW at 100% duty cycle Max. turning torque: 1450 Nm Manual tailstock with clamping and coupling Max. speed: 2500 rpm Electronic handwheel For milling operations: hydraulically swiveling servomotor with 720 Nm and max. 18.5 rpm Podpfx Aeydfy Nsndopw 12-position disc turret with live tooling, max. 3000 rpm at 4 kW Tool holder: VDI 40 Numerous tool holders VDI 40 for internal and external machining as well as live tooling, including some tools – e.g., internal turning tools – otherwise without tools!