Used Huber 6Kw -20°C Pilot One 460V (1) for sale (1,09,568)

Condition: used, Year of construction: 1997, Centerless grinding machine BOCCA MALANDRONE R 120/500 CNC GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x508 mm Ljdjhzvkwspfx Akmohn Regulating Wheel Dimensions: Ø355xØ152,4x508 mm

Condition: new, maximum load weight: 37,495 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis A 100.121 Double T-longitudinal members welded to cross members, front construction height: approx. 147 mm (incl. fifth wheel plate) A 100.260 Chassis version 'Compact rear' A 100.026 Interchangeable 2 kingpins, 1 position: front overhang: approx. 570 mm A 100.164 Fixed rear impact protection, externally, in steel design A 100.390 Container supports as rectangular tubes, approx. 200 x 120 x 8 mm thick, reinforcements on the approach angle A 100.004 Rear underrun protection device according to EC Directive A 100.072 Lateral protection device according to EC Directive A 100.378 Lateral protection device approx. 460 mm high A 420.001 Quick-Lock complete equipment - Locks at every possible position - Locks are theft-proof A 038.001 Container locks for accommodating the following containers: 1 x 20' container, flush with the rear A 046.000 Length from kingpin to rear edge of vehicle: approx. 6,620 mm Support device B 028.001 Two mechanical support winches, 2 x 12 t, semi-circular with base plate, manufacturer: Jost B 001.000 Operation of the support winches on one side, on the right side Axles/Aggregate C 000.004 3 axles, each with a load-carrying capacity of 9,000 kg C 100.020 Wheelbase: approx. 1,410 / 1,310 mm C 075.600 KRONE axles with air suspension and disc brake, ET 120 C 143.028 Aggregate distance = approx. 4,625 mm Ledpfoz Sh Idjx Akmehn C 075.950 Brake disc with approx. 430 mm diameter C 142.010 Load-dependent, fully automatic, electronic lift axle control for the 1st axle C 148.010 Manual function on the control panel for forced lifting (= driving assistance acc. to Directive 97/27/EC) and forced lowering via a rotary button C 148.030 Preparation of the lift/trailing axle(s) for operation from the towing vehicle (without installation in the towing vehicle), according to the selected connector(s) for light, for control via: *Contact 6 of the 7-pole auxiliary connector - ISO 3731 and/or *Contact 12 of the 15-pole connector - ISO 12098 and/or *Contact 8 A of the VBG connector C 043.110 With lifting and lowering device, incl. automatic ride height adjustment Tires (rims) D 400.000 6-fold, 385/65 R 22.5 - manufacturer according to manufacturer's choice D 185.100 Without spare wheel D 130.076 Profile: M+S (Mud + Snow) D 500.130 KRONE Smart Tyre Monitoring acc. to ECE R141 Determination of tire pressure and temperature D 500.121 KRONE TPMS control unit D 500.128 Without connect function in the TPMS control unit Mudguards F 002.010 Plastic wheel cover F 010.001 Splash guard according to EC Directive Brake G 000.103 Braking system according to ECE Regulation 13 (incl. vehicle stabilization function) G 082.000 Spring brake parking brake G 102.010 Diagnosis via ISO7638 connector (EBS supply cable) G 079.002 Brake line connections below the top edge of the beam G 066.101 prepared for KRONE Telematics Dry G 040.000 2 chocks with holder G 071.000 Standard air connections ISO 1728 (Palm) G 064.000 Aluminum air tank G 088.550 Braking system: Wabco Premium G 088.500 Caution: The trailer may only be towed by tractor units which ensure the effectiveness of the ABS! G 085.100 EBS system, 2S/2M, 2 sensors on one axle Light H 000.001 Lighting and light signaling device acc. to UN ECE Reg. No. 48 H 070.005 2 outline lights with rubber arm, LED version H 071.011 LED side marker

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Lodpfx Aou Sqmdekmohn

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment. Lsdpfxju Itk Rs Akmjhn

Condition: used, axle configuration: 2 axles, first registration: 06/1974, color: other, Year of construction: 1974 Empty weight: 3.200 kg Ledpfxjyf Elue Akmjhn Axle 1: left 12 12 mm right 12 12 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, maximum load weight: 23,720 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 11/2016, next inspection (TÜV): 03/2027, total length: 8,694 mm, total width: 2,480 mm, Year of construction: 2016, Equipment: ABS, VEHICLE HISTORY ? INTERNAL NUMBER: ECC KRONE ? 1ST OWNER ? GERMAN TRAILER ? VALID INSPECTION UNTIL 03/2027 Lsdpfx Aksz H Eilemshn ? VIDEO AVAILABLE UPON REQUEST ? VEHICLE IMMEDIATELY AVAILABLE VEHICLE EQUIPMENT ? 3-AXLE BDF SWAP BODY TRAILER ? BPW AXLES ? LIFT AXLE ? ALCOA ALUMINUM RIMS ? AIR SUSPENSION ? DISC BRAKE ? WABCO TRAILER EBS-E ? EBS ? ABS BODY ? BDF SWAP BODY FRAME ? DB SWAP BODY ? KRONE FRAME ? 3-AXLE VERSION VEHICLE DATA ? MANUFACTURER: KRONE ? TYPE: AD ? FIRST REGISTRATION: 25.11.2016 ? YEAR OF MANUFACTURE: 2016 ? VEHICLE TYPE: TRAILER > 10 T ? PERMISSIBLE TOTAL WEIGHT: 27,000 KG ? UNLADEN WEIGHT: 3,280 KG ? PAYLOAD: 23,720 KG ? AXLES: 3 ? AXLE LOADS: 9,000 / 9,000 / 9,000 KG ? VIN: WKEAD00000741503 AXLES / CHASSIS ? 3 X BPW AXLES ? LIFT AXLE ? AIR SUSPENSION ? DISC BRAKE ? EBS ? ABS ? AXLE LOAD: 9,000 KG PER AXLE ? TIRE SIZE: 385/65 R22.5 160J ? ALCOA ALUMINUM RIMS DIMENSIONS ? TOTAL LENGTH: 8,694 MM ? TOTAL WIDTH: 2,480 MM INSPECTION / CONDITION ? VALID INSPECTION UNTIL 03/2027 ? LAST INSPECTION: 28.03.2026 ? RESULT: NO DEFECTS FOUND ? INSPECTION STICKER AFFIXED EXPORT / REGISTRATION ? EXPORT SALES ONLY WITH DEPOSIT MIN. ¤ 500 ? EXPORT SALES ONLY WITH DEPOSIT MIN. ¤ 500 - ¤ 2,000 EXPORT DECLARATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) ? 5-DAY LICENSE PLATE ? 15-DAY LICENSE PLATE ? 30-DAY LICENSE PLATE ? 15-DAY AUSTRIAN LICENSE PLATE ? EURO 1 ? TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. FOR SALES TO THE EU & THIRD COUNTRIES, A DEPOSIT/GUARANTEE OF AT LEAST ¤ 500.00 / ¤ 1,000.00 WILL BE CHARGED. FOR SALES TO THE EU AND THIRD COUNTRIES, A DEPOSIT/GUARANTEE OF AT LEAST ¤ 500.00 / ¤ 1,000.00 WILL BE CHARGED. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE! YOU CAN FIND MORE VEHICLES ON OUR WEBSITE: SALE IS EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS - SEE WEBSITE. IMAGE NOTE: INDIVIDUAL VEHICLE IMAGES MAY HAVE BEEN DIGITALLY PROCESSED. DESCRIPTIONS, LOGOS, OR LICENSE PLATES MAY HAVE BEEN REMOVED OR MADE UNRECOGNIZABLE. IMPORTANT NOTE: DESPITE CAREFUL REVIEW OF ALL DETAILS IN OUR OFFER, ERRORS MAY OCCUR. SOME OF THESE ARE CAUSED BY TRANSMISSION ERRORS IN THE SYSTEMS OF THE VARIOUS PLATFORM PROVIDERS. THEREFORE, WE WOULD LIKE TO POINT OUT THAT ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE AND DOES NOT CONSTITUTE A LEGAL CLAIM. LEGAL: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). RATHER, IT IS INFORMATION FOR THE PURPOSE OF CONCLUDING A CONTRACT. THE INFORMATION PROVIDED HERE IS WITHOUT GUARANTEE AND DOES NOT THEREFORE CONSTITUTE GUARANTEED CHARACTERISTICS.

Condition: used, axle configuration: 2 axles, first registration: 04/1973, color: other, Year of construction: 1973 Empty weight: 3.200 kg Lhedpfjyf Evmox Akmon Axle 1: left 12 12 mm right 12 12 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, Bottling line for rinsing, filling, capping bottles + labeling. 1. Filling unit: Manufacturer: VIR MAURI (ITALY) Type: 9/24/1 Filler capacity: 3,000 - 4,000 bottles per hour (bph) Year of manufacture: 1992 / major overhaul: 2005 Current format: PET bottle, diameter 57 mm, height: 170 mm, cap 28 mm / PCO 1881 Capping machine: AROL - BETA PF1 2. Labeling machine: Ledpfx Aozymzfjkmehn Manufacturer: KRONES Model: CANMATIC Paper labels with hot-melt adhesive Two gluing stations – one applies adhesive to the bottle, the other to the label Capacity: max. 12,000 bph Year of manufacture: 1985 / major overhaul: 2005 (by STM) Machines are regularly serviced and were in working order at the time of dismantling. Requires inspection before starting production. Includes conveyor belts as shown in the pictures.

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Lhsdstp H Erspfx Akmon Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,325 h, load capacity: 15,000 kg, lifting height: 3,530 mm, fuel type: diesel, mast type: simplex, construction height: 3,450 mm, fork carriage width: 2,540 mm, fork length: 2,200 mm, empty load weight: 23,300 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,540 mm, Diesel Forklift Load Center: 1200 mm Fork Width: 350 mm Fork Thickness: 70 mm Mast Type: Standard Lhjdpfx Aksz Ewatemen Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 12.00-20 Rear Tyres Type: Pneumatic Rear Tyres Size: 12.00-20 Description: In addition to this Konecranes model, we also stock approximately 200 heavy-duty forklifts, compact forklifts, counterbalance trucks & sideloaders at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase & financing on favourable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this SMV15-1200C. P.S.: Our master forklift workshop specialises in repair, refurbishment, overhaul and custom builds for forklifts from 8 tonnes upwards. We are also happy to sell your vehicle on consignment at our premises. Sideshift, fork positioner Fork positioner opening range 810 / 2500 mm Heater, full cab,

Condition: like new (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, power: 5.1 kW (6.93 HP), main lifting speed: 4,800 mm/min, fine lifting speed: 580 mm/s, working height: 6,000 mm, Equipment: documentation/manual, 2x Konecranes CXT single-rail trolley for single-girder bridge crane, wire rope hoist, tandem set incl. radio control & control cabinet (year of manufacture 2018) Original new price: approx. 40,000 Euro/NET For sale is a high-quality, complete tandem electric wire rope hoist set from the premium manufacturer Konecranes, model CXT30410020A35FALOS (ALMOST NEW). The system was used in an industrial environment and was professionally dismantled in the summer of 2022 as part of the closure of the Ettlinger weaving mill (as can be seen from the documentation). Since, according to the enclosed factory certificate, the wire rope was renewed shortly before the dismantling on June 22, 2022, the installed ropes are practically new. All documents, test books and circuit diagrams are available in the original Konecranes folder. Technical data (per hoist / trolley): Manufacturer: Konecranes Model: CXT30410020A35FALOS Type: Single-rail trolley / under-flange running trolley (single-girder bridge crane / monorail) Flange width of girder: 180 mm Year of manufacture: 01/2018 Load capacity: 2x 2,000 kg (2.0t) Lifting height: 6.0 m Duty class: M5 (FEM 2m) – very robust industrial design Lifting speed: 4.80 / 0.58 m/min (main and fine lift) Trolley speed: 20.0 m/min Ledpfx Asz D I Hhjkmehn Operating voltage: 400 V / 3~ / 50 Hz (control voltage 48 V) Lifting motor: 2.25 kW (S3-60% ED) | Travel motor: 0.3 kW Protection class: IP55 Extensive accessories & equipment: HBC-radiomatic radio remote control: Yellow handheld transmitter with selector switch for tandem operation (crane I / I+II / II) incl. HBC receiver. Batteries are fully charged. SICK photoelectric light barrier (WL280-2R4331): Integrated collision protection for the safe parallel operation of both trolleys. Complete electrical system: Including central crane control cabinet (Siemens components) and AKAPP cable festoon connections. Like-new load ropes: Renewed on June 22, 2022 (as can be seen from the documentation) and hardly used due to subsequent decommissioning. Complete documentation: Original folder with test books, operating manual for lifting gear/travel drive/radio, spare parts catalog, circuit diagrams and software CD. Special features & highlights: Tandem operation (HBC radio): Control of trolley I, trolley II or both synchronously via a transmitter switch on a main girder – ideal for long goods without transverse movement. Collision protection: SICK photoelectric light barriers prevent unwanted collisions. Fine lift & soft start: 2-stage lifting motor (4.8 / 0.58 m/min) for millimeter-precise positioning. Minimal hook drift: Due to a special drum geometry, the hook travels almost exactly vertically – with almost no lateral offset when lifting/lowering. Long service life: CXT design for maximum hook height; industrial class FEM 2m / ISO M5. Including original Konecranes weather & impact protection: Sturdy protective plates to protect the trolleys. Note on load capacities & documents: * Unit 1 is rated at 2.0 tons (2,000 kg) according to the main test certificate. * Unit 2 is rated at 1.6 tons (1,600 kg) according to the test book. * Hook: Both hoists are equipped with identical Konecranes standard hooks for 2.0t ex works. Condition & safety note: The units operated flawlessly until their dismantling in 2022 and are secured on pallets. Acceptance testing prior to recommissioning is the responsibility of the buyer. Collection & transport: Self-collection is preferred (forklift for loading ava

Condition: ready for operation (used), * Brand: Siebtechnik * Type: 20/35-1 Lhsdpjywmxbofx Akmon * Surface : 3500 x 2000mm - 1 decks * Driving: 11 kW E-motor.

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Lhjdpfxjm Twnlj Akmon Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 1,825 h, lifting height: 11,950 mm, empty load weight: 6,550 kg, Telescopic articulated boom lift MANITOU 120 AETJC Year of manufacture: 2009 According to the meter reading: 1,825 operating hours 11.95 meters working height 9.95 meters platform height 7 meters lateral reach 200 kg payload 6,650 kg weight - Telescopic arm - Articulated arm - White tires - Integrated charger - 48V - Ready for immediate use - Well-maintained machine Lhsdpoz Dvdhjfx Akmsn - On request: new Austrian inspection certificate provided before delivery! Selling price: €7,700 net Affordable delivery also possible!

Condition: ready for operation (used), Year of construction: 2007, pressing force: 122 t, Press brake manufactured in 2007. This Gade PS-C 3120 features a pressing force of 120 tons and a bending length of 3,000 mm. If you are looking to get high-quality bending capabilities, consider the Gade PS-C 3120 machine we have for sale. Contact us for further details. Technical Specification Bending Length 3000 mm Lodpfx Akezzmydemshn

Condition: used, empty load weight: 5,787 kg, maximum load weight: 14,213 kg, overall weight: 20,000 kg, axle configuration: 1 axle, first registration: 05/2025, next inspection (TÜV): 05/2027, suspension: air, tire size: 235/72R17,5, Equipment: ABS, truck registration, | Krone City Liner Profi/1-axle curtain-sided semi-trailer, forced steering | Toolbox | Spare wheel holder, Edscha convertible top | SAF axles with disc brakes | Tare weight: 5,787 kg, payload: 14,213 kg | Tires: 275/70R22.5 | 2000kg tail lift | Loading area length: 11.25m | Subject to errors, input errors, and prior sale. Lhodpjzv U R Hofx Akmen

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Lhodjh Eii Tjpfx Akmsn Technical data and description: see pictures

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Lhedpfxjxqcrzj Akmjn Max opening : 730 g \+ robot TECHNOMATIC

Condition: used, empty load weight: 6,890 kg, maximum load weight: 5,110 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/2005, loading space length: 7,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 40 m³, suspension: air, color: white, Year of construction: 2005, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, * German trailer * First owner * Condition: see photos * 2-axle Schmitz tandem trailer, type ZK018 * Body: Refrigerated box with CARRIER underfloor refrigeration unit, type SUPRA 950U * Deep-freeze unit with a cooling capacity from 0°C to -20°C * Standby and on-the-road cooling via diesel and electric drive * Loading area dimensions: Length 7,500 mm x Width 2,450 mm x Height 2,200 mm * Front roller shutter door for drive-through loading Lhsdezrnpzjpfx Akmen * Multiple anchor rails on the right, left, and top * Rear roller shutter door * Loading platform BÄR, type BC 1500S * Load capacity 1,500 kg * 3 support legs * Schmitz axles * Air suspension * ABS + EBS * Storage compartments * Gross vehicle weight (GVW) 12,000 kg * Unladen weight 6,890 kg * Payload 5,110 kg * Load volume 40 m³ If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety report), or a new UVV (accident prevention regulations) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after making an appointment. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 Ledpfxjuzv Tzj Akmehn guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Lhjdov D Uhfjpfx Akmsn Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: used, functionality: unexamined, Ferwood Code: RU0011869 - Manufacturer Code: SP075S-MF2-20-1C1-2S - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 4KG 36X26X21 Lhsdpfxjymd Iws Akmjn

Condition: used, Year of construction: 2003, Filter area: 50 m² Ljdozb N T Uepfx Akmjhn Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg 91 kW Lhjdpsyltr Asfx Akmjn Top condition

Condition: used, empty load weight: 6,572 kg, maximum load weight: 29,428 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Krone SDP27 Profiliner | 1st and 3rd axles can be lifted | EDSCHA canvas cover | Krone axles with disc brakes | Spare wheel holder | Toolbox | Pallet box | Tires: 385/65 R22.5 | Subject to errors, typos and prior sale. Lhjdpfxoz S Il Ie Akmon