Used Jumo Tya32-45/50.530 for sale (9,213)

Year of construction: 2022, condition: ready for operation (used), overall weight: 4,500 kg, This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. • Max diameter (steel 450 n/mm²): ∅ 45x4 mm // max diameter (stainless steel 700 n/mm²): ∅ 40x3 mm // max diameter (steel 450 n/mm²): 40x35x2 mm • Tube passage in the collet: ∅ 45 mm • Useful working length with tube passage in the collet: 5100 mm • Bending angle max: 180+10° • Speed y axis: 150 °/sec. // speed x axis: 450 mm/sec. // speed z axis: 360 °/sec. • Precision y axis: +/-0. 1° // precision x axis: +/-0. 1 mm // precision z axis: +/-0. 1° • Bending: clockwise • Total installed power: 15 kw • Voltage and frequency: 400 volt / 50 hzMachine still under powerSquare tube sizes: 12x12, 20x20 • Round tube diameters: 12, 16, 20, 22, 27, 33.7 Pjdoyzg A Uspfx Apbspw • Notes: • Square 12x12 can also be used for round diameter 12 • Square 20x20 can also be used for round diameter 20

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - ShopTurn, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - ShopTurn Turning diam. : 300 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):13 kW Torque (max.):100 Nm Barcapacity:45 mm Workpiececlamping I:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Workpiececlamping II:Collet chuck, SMW Autoblok Gr. 52 Subspindle: Technology:Motorspindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):42 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 140-35 Ejector:Pneumatic Movement in Z:510 mm Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:160/70/510 mm Eilgang in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Ppedpfoznqyujx Apbow Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, UAS SMOG HOG Toolholder:Misc. static and driven toolholder Further Accessory:Misc. used clamping heads and spindle reducers

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Pjdpfx Ajzn Ny Hjpbspw

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Podpfxezn Nwxo Apbjpw

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the highbed approximately 4,140 mm, length of the lowbed approximately 8,600 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 1,600 mm high, 18 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing points, 4 pairs of container locking mechanisms for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, surcharge for aluminum ramps, price: 2,200 €, spare wheel, price: 300 €, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Ppsdpfsznz E Usx Apbjw

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Ppjdpfex It Aujx Apbsw

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Podpfx Apsznuqwsbepw

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 3,332 h, machine/vehicle number: 16348, load capacity: 227 kg, lifting height: 15,940 mm, overall weight: 7,620 kg, empty load weight: 7,620 kg, transport length: 6,850 mm, transport width: 1,800 mm, transport height: 2,000 mm, next inspection (TÜV): 12/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, color: red, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to the continuous and regular maintenance, the machine is in excellent technical condition. The purchase price includes recently prepared inspection reports issued in the customer's name, and we also provide detailed information on the condition of the batteries. Ppjdpfxszp Hl Nj Apbsw You can find the complete and detailed specifications of the machine on our website.

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Ppodpeznimysfx Apbow

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Motor: 11 kW / 15 hp Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Ppedpfx Apoy Tl Exobow Tip Servo Drive Laser-cut seam indicator Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Location: Nattheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 99 h, machine/vehicle number: 256373, load capacity: 227 kg, lifting height: 15,700 mm, empty load weight: 6,810 kg, transport length: 6,040 mm, transport width: 1,550 mm, transport height: 2,010 mm, next inspection (TÜV): 12/2026, fuel type: electric, tire condition: 90 %, drive condition: 100 %, color: yellow, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to its continuous and systematic maintenance, the machine is in excellent technical condition. Ppjdpfjzpvuasx Apbow

Year of construction: 2021, condition: used, Alpha Laval Aldec 45 Centrifuge (Decanter) (Unused 2021) High-performance industrial decanter centrifuge system designed for continuous sludge dewatering in petrochemical wastewater treatment. Engineered for both oily and biological sludge streams, delivering robust phase separation with >15% solids cake Max. density of compact wet cake: 1.3kg/dm3 - max. 4200rpm Bowl Maximum main speed:4200rpm Bowl diameter: 360mm Please note as the goods are packed the pictures shown are representative and not of actual units Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. Psdpfx Apozl U A Uebopw BPDD and EUS forms can be downloaded from the website.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 6,139 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Pedpfxozn Dans Apbopw Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and certified according to FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Turntable, 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, soot filter, full cabin, safety light, interior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 6,963 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Ppodpfx Apezn Dahsbsw Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not buy a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will gladly advise you competently and in detail about our vehicles. Rotating device, 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, soot filter, full cabin, safety light, interior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp, foot clamp holder, mounting bracket -Manufacturer: MiniTec, Mounting bracket: Aluminum -Type: 45 GD -Item No.: 21.1133 Ppsdpfx Apeznvf Nebow -Number: 176x holders available -Price: per piece, minimum order 5 pieces -Dimensions: 42/42/H42 mm -Weight: 0.1 kg/pc.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 7,317 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Psdpfoznpibsx Apbjpw Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and meets FEM4.004 standards. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, soot filter, full cab, safety light, interior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat

Condition: good (used), Year of construction: 1994, Sawblade tiltable 45 ° Length of the rolling table 2800 mm cutting width 1250 mm Motor output 5,5 kW Cutting height 150 mm Psdozfqkujpfx Apbspw weight of the machine ca. 1100 kg

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm Ppedpfxjzniqxe Apbsw -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is an Altendorf F 45 panel saw in a high-quality industrial design. The machine impresses with its precise workmanship, extensive features, and the well-known Altendorf quality standard. Thanks to the electronic control and the motorized height and swivel adjustment, it is ideally suited for professional use in carpentry shops, joineries, and interior design. Technical data Manufacturer: Altendorf Type: F45 Year of manufacture: 2007 Main motor: 5.5 kW Voltage: 380 volts Sliding table length: 2,800 mm Table width to the right of the saw blade: 1,000 mm Max. saw blade diameter: 550 mm Scoring preparation Motorized height adjustment Motorized swivel adjustment Electronic control with display Electronic display for cutting height and swivel angle Features Precision sliding table Digital display on the parallel fence Z-Laser Duplex miter fence INDEX fence system Large extension table with telescopic fence Upper dust extraction hood Robust industrial design Made in Germany The machine is in good used condition with the usual age-related signs of wear. It is excellent for professional use and can be inspected and tested by appointment. Psdpfx Apjzm Hq Hjbepw Transport is possible for an additional charge! The machine will be inspected before sale. Due to the age of the used machine, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: new, Number of motors 2 Stück 0 2650 mm Control manuell Ruchser RU-GLS-ED 45° glazing bead saw ----- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The Machine was designed for cutting glazing beads in pairs with one Cutting angle of 45° developed and has a fixed and a movable saw unit. The manual length adjustment is equipped with an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved be sawn. During the cutting process, the glazing beads are with a pneumatic tensioning device from above and from the front to prevent tipping of the glazing beads. It is operated via a safety Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V Pos. 1: RU-GLS-ED45° double glazing bead saw ----- with manual measurement adjustment, for pairs Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.2 Recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: Pos. 1.5 Operating time switching device for Ppedpfexmk Dqjx Apbew independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: Item 1.6 1 set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, each consisting of 1 piece of saw blade L6444(right) and L6443, (left), with special grinding 43°. Additional price: ----- All prices in euros, net, plus statutory. VAT (technical information according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Pedpfx Aoyudidspbepw

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,358 kg, axle configuration: 3 axles, first registration: 07/2022, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Ppsdpfxey E Hv Ns Apbjw Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4009mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 8 mm Front right - 7 mm Middle left - 8 mm Middle right - 7 mm Rear left - 12 mm Rear right - 13 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 03/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Pedpfx Aszbk Rhepbepw Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 8 mm Middle right - 8 mm Rear left - 6 mm Rear right - 9 mm

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4 Psdpfx Aozmdkqepbepw

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Ppodozmdg Espfx Apbow Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW