Used Baisheng Laser for sale (2,936)

Condition: used, Year of construction: 2017, Sieving machine- 2017 Mobile Concept Laser QM Powder With Siemens PLC Powder Handling Unit - Hedpfx Ahjz N H Ate Ujfn

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) Hjdpfxjzt A H Rs Ah Uofn 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Hfsdpfx Ahez R D Dqe Uon Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Hfjdpfxozz A A Ij Ah Ujn Operating and programming manual Inspection while the system is running is welcome.

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. Hjdpfxezyzzyj Ah Uofn The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty Hsdpfx Ahjyfucve Uofn - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A Hfsdsz Eu Syjpfx Ah Uen ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Hjdpoz R Eiujfx Ah Uefn Designation / ID: FD060 Serial number: 01 Date of manufacture: 07.2022 (Code: 22-07-00) Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE).

Condition: ready for operation (used), Year of construction: 2008, laser power: 1,15,000 W, number of axes: 3, CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details. Laser system • Wavelength: ~10.6 µm • Scanning head: 3-axis galvanometric system • Axes: X/Y via scanning mirrors; Z with dynamic focusing (per optical setup) • Working field: Approx. 200 × 200 to 500 × 500 mm • Processing modes: Cutting, marking, engraving, micro-perforation • Adjustable parameters: Laser power, frequency, processing speedPaper handling • Feeding: Automatic sheet feeder with stack loader • Max stack height: 350 mm • Paper weight range: 120–300 g/m² • Operation: Fully automatic cycle • Transport: Integrated conveyor system • Output: Automatic sheet discharge and collectionControl and software • Control: PC-basedSafety and extraction • Enclosed laser processing area • Interlocked access doors Hjdpfx Ahoz Hbyyj Ujfn • Laser safety shutters • Emergency-stop devices • Fume extraction connections (external unit required)Electrical data • Supply voltage: 230 V AC, single phase with neutral and PE • Frequency: 50/60 Hz • Machine nameplate power: 200 W • Machine nameplate current: 1 A

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Hodpfxsz N Duto Ah Uefn Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: K990424, type of input current: three-phase, type of cooling: air, overall weight: 600 kg, total length: 15,000 mm, total width: 10,000 mm, total height: 2,000 mm, Equipment: CE marking, documentation/manual, emergency stop, Laser Bystronic BTL 4020 – Professional sheet metal cutting equipment Fortza.ro is offering for sale a Bystronic BTL 4020 laser, professional equipment designed for sheet metal cutting, with a cutting capacity of up to 15 mm thickness. The machine also offers the possibility of cutting tubes with a diameter of up to 140 mm, as well as an automatic sheet loading system, to streamline the work process. Condition: Functional Manufacturer: Bystronic Laser AG, CH-3362 Niederönz, Switzerland Hfedpfxoz H Uihe Ah Uen Model: BTL 4020 Year of manufacture: 2018 Order number (Job No.): K990424 Equipment number (Machine No.): 1214 Country of origin: Switzerland Technical specifications Maximum sheet metal cutting thickness: 15 mm Maximum diameter for tube cutting: 140 mm Automatic sheet loading: Yes Power supply: 3 × 400 V, three-phase Frequency: 50 Hz Electrical power: 80 kW Maximum current: 125 A Maximum current of the largest consumer: 63 A Marking: CE – complies with European standards Total weight: 600 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase. Hfsdpfxoz D D N Es Ah Uen

Condition: used, functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-2000-CUT, laser power: 2,000 W, input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: cooling unit, We are offering this used IPG Laser YLS-2000-CUT. Model name: YLS-2000-CUT Serial number: 16126751 Rated voltage: 400-460 V AC 3P/PE Frequency: 50/60 Hz Rated current at full load: 15.2 A Fuses: 20/120 A/kA Drawing number: G25-16-130212-7 Date of manufacture: December 2016 Hfjdpfezhcvnox Ah Uen with the corresponding water chiller: IPG chiller Model LC 71.01-A.4.5/6 Date of manufacture: 2018 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: NRGL614.01025, type of input current: AC, total width: 3,340 mm, input voltage: 400 V, input current: 19 A, SEI NRGL 1612 V300 – 300 W Industrial CO₂ Laser Cutter with Automatic Material Loader – Operational Industrial SEI NRGL 1612 V300 laser cutting system for sale. Manufactured in 2021 and equipped with a 300 W CO₂ laser source and material loading system. The machine is fully operational and available for inspection. Approximately 10,000 operating hours. Key Features: • SEI NRGL 1612 V300 • Year: 2021 • 300 W CO₂ laser • Working area: 1600 × 1200 mm • Automatic material loader included • Approx. 10,000 operating hours • Operational and available for testing • Located in Munich Germany Suitable for industrial processing of acrylic, textiles, technical fabrics, wood, paper, cardboard, and other non-metal materials. Price: €40,000 VB Hsdpfx Ahjzcny As Usfn Additional photos, videos, technical documentation, and inspection appointments available upon request. Transportation not included, can be discussed defined and agreed.

Condition: used, Year of construction: 2018, machine/vehicle number: 1803006, with extraction system, manufactured by LOTUS LASER SYSTEMS, and an additional pre-filter extraction system, type: VACUAIR UML 350, in new condition. Hfsdpsz Nhr Asfx Ah Usn

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data Hedsyfvhgjpfx Ah Ujfn - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Hfedpfxezw Eu So Ah Ujn

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Hsdozyzwnepfx Ah Usfn Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany Hfsdpfxoyimz Ae Ah Ujn XXL Workstation – Custom Construction: - Standing workstation with table height designed for standing operation - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm,

Condition: as good as new (ex-display), Year of construction: 2023, Fiber laser 1500 x 3000 12kW Year of production 2023 DEMO machine The machine has never worked in production Price includes - exchangeable working table 1500 x 3000mm - 12kW MAXPhotonics source - BLT head with autofocus - HYPCUT software - Nesting software - CYPNEST - Warranty 2 years - Chiller (cooling unit) - Voltage stabilizer - Wireless remote control controller Hfodsr A Ellepfx Ah Usn - Automatic high-pressure proportional valve (N2 and O2) - Light curtains - Camera set (3 pcs) with color monitor - CE safety glass - Safety sensors - Safety rear gate - Barell filter set - CE declaration of conformity

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 350 h, overall weight: 2,359 kg, input voltage: 400 V, For sale is a high-quality, professional Just Laser core laser with 400W CO2 laser power. This machine is ideally suited for precise laser cutting and engraving in a wide variety of materials. The system is in very good condition and has seen little use due to its low operating hours (approx. 400 hours). It is ready for immediate use. The system features 2 cutting heads for the most precise results: 1. Standard laser head for cutting wood, MDF, HDF, plywood, solid wood, acrylic, leather, cardboard, many plastics, etc., and engraving wood, glass, leather, textiles, rubber, melamine, cardboard, acrylic, ceramics, and many plastics. 2. Metal cutting head with automatic height adjustment for steel, aluminum, copper, and brass. 3. K-Vision camera option Table size: 2540x1320 The system also includes: * 5 kW frequency-controlled extraction system * Activated carbon and cartridge filters * 5 kW Mark screw compressor Hfedpfeznbzvsx Ah Uen Inspection is possible by appointment. Cutting thickness: up to 24 mm for wood, 3/4 mm for steel sheet. According to the manufacturer, it is the fastest large-area engraving machine on the market, with a speed of 3.8 m/s.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Hfsdpfx Aozg D I Ajh Usn

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Hjdpfxsrq D D Es Ah Uofn Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Year of construction: 1998, condition: used, machine/vehicle number: 9086,

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data Hsdpfxjyctfds Ah Uofn - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1