Used Jung Je 525 for sale (2,417)

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm Pedpezbczrofx Airsgu grinding width 200 mm

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Pgjdpfx Aezimhwsirju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 5,807 h, load capacity: 2,000 kg, fuel type: electric, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 546 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, JUNGHEINRICH EJE 220 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V Psdpfxo Afwxvs Airegu Charger: ohne, without Tyres: Polyurethan Mono Service weight: 546 kg Length: 1.700 mm Width: 720 mm Year of manufacture: 2012 Operating hours: 5.807 h Condition: working condition Internal no.: 1309299 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), grinding length: 400 mm, grinding width: 150 mm, Table length 400 mm Pgsdevga Sujpfx Airsu Table width 150 mm Grinding length 400 mm Grinding width 150 mm Design: hydraulic Max. distance from table to spindle center line 350 mm Table speeds: continuously variable from 0.00 m/min up to 0.0 m/min Automatic vertical feed: from 0.000 mm up to 0.013 mm Diameter of grinding wheel 00 mm Width of the grinding wheel 16 mm Grinding wheel speeds: from 800 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor 0.30 HP Machine weight approximately 900 kg Overall dimensions of the machine: Length 1300 mm Width 1000 mm Height 1500 mm

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Pedpfxsyuy Euj Airsgu Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: Podpfx Aiez A D Dgerjgu This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2023, condition: refurbished (used), JUNG HF50 SPM Mechanically and geometrically refurbished According to JUNG new machine specifications Electrical overhaul approx. 2010 / function tested and wear parts replaced (in a new control cabinet) Newly painted - Stepper motor feed - 3-axis digital display Pedpfehcw U Uox Airsgu - Dressing compensation - Holding force control - Used magnetic chuck - Paper band filter optional 12 months warranty on mechanics and geometry and 6 weeks parts warranty on electrical components max. magnet size: 600 x 200 mm (standard 500 x 200 mm) max. grinding area: 600 x 250 mm Delivery time: upon agreement / subject to prior sale We will gladly accept your used JUNG grinding machine as a trade-in.

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E 1991 Pjdpfxjy Iy Uke Airjgu

Condition: used, Year of construction: 1961, Technical details: Podpfx Aju Ngg Uoirjgu grinding length: 600 mm grinding width: 200 mm workpiece height: 270 mm grinding length: mit Magnet: 500 mm Distance Spindlecenter - clamping surface area, min:: 350 mm grinding spindle speed: 1000...4700 U/min table surface area: 720 x 200 mm table load capacity: 60 kp magnetic plate size: 455 x 180 (Gleichstrom) mm magnetic-table: vertical kippen 90° längs Stück total power requirement: 2,0 (2,7 PS) kW weight of the machine ca.: 1600 + 176 kg Gleichrichter kg dimension machine xH: 1,4 x 1,8 x 1,7 m transport measurements machine: 1,4 x 1,8 x 1,6 m dimensions electric cabinet: L: 850 x B: 450 x H: 1.100 mm dimensions of grinding wheel: Ø 225 x 20 x Bohrung Ø 51 mm mm The magnetic plate (24V) is cooled. Grinding spindle: The grinding wheel infeed is electric, vertical 270mm, infeed z-axis 0,002 mm to unlimited inching infeed 0,001 - 0,010mm Peripheral speed max 35 m/sec. allowed equipped with coolant tank, pump and magnetic separator, as well as grinding wheel - size Ø 152 x 14mm plus various accessories (in the cabinet) like some grinding wheels and balancing flange The machine is pre-equipped for an exhaust system. *

Condition: used, Year of construction: 1968, grinding length 500 mm grinding width 200 mm workpiece height 250 mm turning speeds 1000 - 4000 U/min table surface area 600 x 200 mm grinding wheel size 225 x 20 x 51 mm grinding spindle drive 1,5 kW table feed 1 - 20 m/min total power requirement 2,6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6 x 1,6 x 1,8 m Pgjdpswuuwyefx Aireu Automatic feed; 2-axis digital display; stepless speed control; Water-cooled sine angle magnetic clamping plate 400x135mm; 10mm magnetic pitch Sony digital display with scales for transverse and height adjustment Swing-out dresser on the grinding head Table direction reversal with contactless inductive switches LOSMA belt filter coolant system

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m Pgsdpfx Aioz Iphnjrou All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Year of construction: 1968, 450 mm Länge Pedpfsqwpwzex Airegu x-travel 500 mm workpiece height . mm

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Podpfsxbtl Tjx Airsgu Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm Pgsdpfxsxgbb Tj Aireu - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device

Condition: good (used), Jung surface grinding machine X-path: 740 mm Bed: 725 x 170 mm Pgedpfx Aeq H Ap Tsireu Magnetic bed: 460 x 155 mm Dimensions: 162x130x190 cm LxWxH

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touchscreen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Pjdjz Ipi Eepfx Airjgu Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: used, machine/vehicle number: 304, empty load weight: 3,840 kg, maximum load weight: 14,160 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1999, loading space length: 7,800 mm, loading space width: 1,800 mm, suspension: steel, tire size: 235/75 r17,5, wheelbase: 5,900 mm, color: black, Equipment: ABS, Drum brake SAF axles Pgedepiav Sjpfx Airsu Pneumatic load securing pneumatic Lowerable drawbar loading sill height 1,150 mm Errors excepted

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm revolutions of grinding spindle 3000 U/min grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Pgsdpfx Aioxu Nw Eersu Includes extractor 1 additional grinding wheel holder Machine was in occasional use until recently

Condition: excellent (used), Year of construction: 2010, operating hours: 4,50,00,000 h, machine/vehicle number: 1091, PCS-H Off Press Controls Screen Display PDS-E: Print Density Control Ryobimatic Dampening RPC Semi Automatic Plate Change Baldwin IR/TL Dryer Non-stop Delivery Ink. Temperature Control Grafix: Powder Sprayer Podpfx Asfvvdgsirsgu Coating System with Doctor Chamber Blade Automatic Blanket Washing Device Automatic Ink Roller Washing Device Automatic Impression Cylinder Washing Device High Pile Delivery All Units with New Rollers from Böttcher Cleaned & Checked & Ready for Printtest Number of Printing Units : 5 Units Number of Coating Units : 1 Coating Unit Print Output Maximum : 15.000 Sheets / Hour Largest Sheet Size X : 520 mm Largest Sheet Size Y : 375 mm Min. Sheet Size X : 100 mm Min. Sheet Size Y : 105 mm Largest Print Format (X) : 505 mm Largest Print Format (Y) : 350 mm Max. Paper Strength : 0,6 mm Min. Paper Strength : 0,04 mm Printing Plate Size : 510 x 400 mm Blanket Size : 541 x 437 mm Blanket Thickness : 1.90 mm Technical data can vary according to job, consumables, printing stock and, possible, other factors

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 7570, 1 used: JUNG Surface and Profile Grinding Machine • Model: HF 50-R(D) • Machine No.: 7570 • Year of manufacture: approx. 1977, overhauled 06-1998 • Grinding area: 500 x 200 mm • Grinding wheel: max. 250 x 25 x 51 mm EQUIPMENT: Electro-magnetic chuck 450 x 180 mm 1 straight dresser mounted on the side of the spindle head 1 grinding wheel holder with wheel 1 universal paper band filter 1 frequency converter for speed control Leveling feet Pedjw R Tqpjpfx Airegu

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Podpfxsz Ipifj Airegu Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), grinding length 600 mm grinding width 200 mm max. dia. of grinding wheel 220 mm magnetic clamping plate 500 x 200 mm total power requirement 4,2 kW dimensions of the machine ca. 2 x 1,3 x 1,8 m Pgsdsxb Eg Ajpfx Airsu

Condition: good (used), Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: 19,559 mm Number of fields per racking bay: 07 units Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per field: 09 units Number of pallet spaces per bay: 63 units Total number of pallet spaces: 63 units Based on: Load handling equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of supply: 08x Pallet racking uprights, used Material color: green Frame profile: M94 Profile dimensions: 76.2 x 74.7 x 2.3 mm including cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) Height: 2,710 mm Depth: 1,050 mm 28x Pallet racking beams, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Connector: 5 hooks clear width: 2,707 mm max. load per pair of beams 2,400 kg, with evenly distributed load. 56x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 32x Bolt anchors, new Pgodezu Nwropfx Airsu Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and bay loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 200 mm, The machine is currently under construction; delivery will be arranged upon request. Please contact us. Grinding area: 500 x 200 x 400 mm (400 mm between the center of the grinding spindle and the table) New electrical system and control: - Completely new electrical system, wiring, and conversion to a 24V control voltage - 5.5 kW Siemens grinding spindle motor, eliminating the need for a generator cabinet, with stepless speed control - Sensor control of the switching points of the X and Z axes - Cross table control via Siemens frequency converter and PLC - 2-axis digital measuring system - Programmable end-of-travel limit switch for the vertical/Y-axis - Adjustment of the cross table controls to eye level - Machine control at the usual position, with individual switch-off function Condition of the machine: - Geometrically overhauled - Grinding spindle runout within 3 µm - Completely new electrical system, compliant with VDE standards - 5.5 kW grinding spindle drive with new control, no rack required - Professional new paint job in RAL 7035 / 7012 - CE declaration of conformity Equipment: - Magnetic clamping plate - 24V magnetic control with holding force regulation and demagnetization Pjdpeb A D Nlsfx Airsgu - Side dresser - Grinding wheel flange with wheel

Condition: reconditioned (used), Year of construction: 2025, grinding length: 400 mm, grinding width: 200 mm, JUNG JF415 / JF420 rebuilt mechanicaly, geometricaly und electricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel - 12 month warranty delivery time approx. 12 weeks Pgodpfoc S Agvex Airsu max. grinding range: 400 x 200 m