bore capacity in steel (diameter): 63 mm
arm length:: 2000
workpiece height max.: 1270 mm
spindle taper MT: MK 5
drill depth: 400 (Hub) mm
quill stroke: 400 mm
feed: 0,05 - 0,32 m/min
revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min
column turnable: 360 °
electrics - voltage/frequency: 380/50 V/Hz
base plate: 1900 x 950 mm
total power requirement: 13 kW
weight of the machine ca.: 7,9 t
space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m
Vqujai
This radial drilling...
bore capacity in steel (diameter) 80 mm
arm length 2000 mm
bore capacity in cast iron 100 mm
spindle turning speed range 25 * 1670 U/min
column diameter 500 mm
feed range 0,08 - 0,7 mm/U
number of feeds 8
bore spindles - Morse Taper 5
distance spindle /table 1740 mm
Benrvttgkh
total power requirement 5 kW
weight of the machine ca. 9 t
dimensions of the machine ca. m
bore capacity in steel (diameter) 55,0 mm
arm length 2000 mm
bore capacity in cast iron 65,0 mm
morse taper 5 MK
turning speeds 30 - 1.200 U/min
threading 40 M
distance spindle/base plate 550 - 1670 mm
spindle stroke - max. 240 mm
engine output 5,5 kW
weight 4.800 kg
range L-W-H 1.120 x 2.990 x 2.750 mm
Furnishing:
- electrical height adjustment from the boom
Brl0kyqwyg
- hydraulic central clamping
- automatic spindle feed
- Thread cutting device
- Run right / left
- T-slot dice table
- machi...
Radiaalboormachine Stanko 2A576Base plate clamping surface:
Width 1250mm
Length 2500mmOverall dimensions
Arm length: 3000mm
Spindle feed: 500mm
Spindle: MK50
Bxefqb7bsq
Drilling capacity: bis zum 100mm
Weight +/- 11000kg
bore capacity in steel diameter / mm
arm length 2500 mm
workpiece height max mm
-----
WORKING RANGE -BORING-
- throat (max) 2500 mm
MILLING SPINDLE / HEAD /
- spindle revolutions (min) 18 /min
- spindle revolutions (max) 1800 /min
- spindle diameter 90 mm
Zc2hkf07
- tool fixture: MK 5
- sleeve stroke 400 mm
DIMENSIONS / WEIGHTS
- space requirements -left/right- 3750 mm
- space requirements -front/back- 1200 mm
- total height 3750 mm
- total weight approx. 12000...
The radial drilling machine CSEPEL RFH 75/2000 was manufactured in 1988 in Hungary by Csepel-Müvek.
Characteristic parameters:
- the largest drilling diameter in solid material, in steel: fi 75 mm
- the largest drilling diameter in solid material, in cast iron: fi 90 mm
- The largest drilling diameter with pre-drilling in steel: fi 125 mm
- The largest drilling diameter with pre-drilling in cast iron: fi 140 mm
- vertical arm displacement over the column: 950 mm
- horizontal displacement of the...
bore capacity in steel (diameter): 100 mm
arm length: 400 - 2100 mm
cantilever adjustment vertical: 100 mm
spindle taper MT: 50
drill depth: 415 mm
spindle stroke: 400 (Skala) mm
Betavpawnn
column turnable: 360 °
column diameter: Ø 500 mm
distance drilling head - clamping area: min./max.: 400 / 1.800 mm
number of spindle speeds: 12,5 ... 1.600 / 15 step U/min
feed: 0,063 ... 2,5 / 15 step mm/U
table clamping surface:: L x B: 2.000 x B: 950 mm
total power requirement: ca. 35 kW
weight of the mach...
bore capacity in steel (diameter) 70 mm
arm length 2200 mm
workpiece height max. 1500 mm
table surface area 1900 x1000 mm
bore spindle diameter /taper MK 6 mm
bore spindle turning speed range 11,2 - 2000 U/min
bore feed range 0,035 - 2,8 mm/U
bore spindle stroke 400 mm
distance spindle/base plate 870 / 1870 mm
spindle movement - horizontal 1600 mm
voltage 380 V / 50 V
spindle drive 5,5 kW
total power requirement 10 kVA
weight of the machine ca. 5,5 t
Beny8822ow
dimensions of the machine ca. 3,3 ...
Radial drilling machine DIAG Kolb
Type UH 2000
year of manufacture 1980
clamping surface 2300 x 1100 mm
drilling spindle 50/90 mm
working range 440 mm - 2000 mm
Bvjbkvtl7o
functional
bore capacity in steel (diameter) 63 mm
boring head horiz. adjustable 1600 mm
throat 2000 mm
tool taper MK 5
feed range 0,04 - 3,2 mm/min
distance spindle center to column 450 - 2050 mm
distance spindle /table 400 - 1600 mm
stroke speed 1 m/min
pivoting angle 260 Grad
spindle turning speed range 20 - 1600 U/min
number of spindle speeds 16
feed range 0,04 - 3,2 mm/U
quill stroke 400 mm
horiz. adjustment of drilling head 1600 mm
total power requirement 5,5 kW
weight of the machine ca. 6 t
dimens...
Radial drilling machine, make Csepel Hungary, type Raboma RFM - 12082, year 1964, drive power 17 kW, clamping range 2.200 x 12.000 mm, max. workpiece mass 60 tons, machining range length/width 10.000/2.300 mm, machining height max. 2.300 mm, machining depth max. 400 mm, drilling DM max. 80 mm,
clamping floor, consisting of 3 segments 4.000 x 1.500 mm,
Pjvzp
plus 4 workshop steel cabinets with various accessories, 2 clamping cubes, dimensions 1,000 x 800 x 630 mm".
table mounting size: 400 x 1500 mm
table movement x: 1130 mm
table movement y: 320 mm
table movement z: 430 mm
spindle taper: ISA 50
spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm
carriages longitudinal and cross: 15 - 600 mm/min
Bwprmyr2ts
carriages vertical: 6 - 240 mm/min
space needed: 2500 x 2200 x 1900 mm
weight: 3000 kg
bore capacity in steel (diameter):90 mm
Ihjzvl2
arm length:2500 mm
workpiece height max.:1600 mm
tool taper:6 MK
weight of the machine ca.:9,5 t
dimensions of the machine ca.:3,6 x 1,55 x 3,6 m
Reference: RAD001
Model CARLTON CINCINNATI 7
Spindle stroke (mm) 450
Table size (mm) 2200x1300
Distance between table-tool (mm) 1900
Spindle Ø (mm) 100
Spindle attachment (MT) 7
Blxdfeuw
Max radius (mm) max 2700
Arm length (mm) 2300
Spindle speeds (Rpm) 34-1200
Main motor power (Hp) 12
Machine equipped with : Hydr. clamping
Dimensions LxWxH (mm) 3800x1400x3800
Weight of the machine (T) 15
Machine number: 30516
Spindle mount: MK 5
Drilling capacity: 63 mm
Bvrr2nz9h3
Clamping surface footprint: 1,130 x 2,370 mm
throat depth min/max: 520 / 2.000 mm
distance clamping surface - spindle max.: 1.900 mm
Speed range: 11.2 to 1,400 rpm
Feed rate: 0.05 to 2.5 mm/rev.
Control: conventional
Cube table: 1,400 x 1,090 x 630 mm mm
Total connection: 7,5 kW
Accessories/equipment: clamping cube
Weight: 8,5 t
Footprint: 3,800 x 1,650 mm
Dimensions: 3,800 x 1,650 x 3,800 mm
Heavy radial drilling machine of the German manufacturer ELHA, Hövelhof with CE Bj. 1998
(not a cheap Asian machine! but really stable and precise)
Max. Drilling capacity in St. 60: 80 mm (500 - 600 N/mm²)
Max. Tapping capacity in steel St. 60: M 80 x 6
Spindle mounting: MK 6
Spindle Ø: 110 mm
Max. Drilling depth: 550 mm
32 Spindle speeds: 16 - 1,250 rpm
18 drilling feeds: 0.06 - 3.0 mm/rev.
Max. feed force feed force: 3200 daN
Column-Ø: ^ 500 mm
Distance spindle centre-column: min. max. 375 - 2...
Radial drilling machine BREDA RB 55 / 2000
Drilling capacity up to 55 mm
Fh8m7hd
throat depth 2000 mm
Clamping table
Power:16 kW
Bsz2kd9dgw
Drilling Capacity: 100 mm
Arm Length: 2100 mm
Arm Travel: 1500 mm
Weight: 13 t
The machine is in very good technical condition, under power.
O977p
HEAVY DUTY RADIAL DRILL
make : CSEPEL.
model : RFM 51.
hydraulic clamps.
X axis : 4000 mm.
Ith390l
arm travel : 3100 mm.
radius: 2460 mm.
drilling capacity in steel : 100 mm.
drilling capacity in cast iron : 120 mm.
weight : 20/21 ton.
:RB 100 | RB 120
bore capacity in steel (diameter):100 | 125 mm
Nk7rn
arm length:3150 | 4000 mm
distance spindle center to floor plate:2500 | 2500 mm
distance spindle center to table:min. 750 mm
spindle stroke:500 | 560 mm
Distance between spindle and column, max.:3150 | 4000 mm
Distance between spindle and column, min.:570 | 600 mm
spindle taper MT:6 MK | Metrisch 80
spindle turning speed range:8-1000 | 6-800 U/min
transmission ratio:22
feed range:0.06-3.2 mm/min
dice table:800x1250 mm
power...
Wall radial drilling machine Fabr. WEBO type BR 50 WH/3200
Masch. # E 857/11 built in 1975
Technical data:
Drilling capacity 50 / 60 mm
Spindle mount Mt 5
Quill stroke 350 mm
KL. / gr. Removing tailstock - Center stand/projection 1150/3300 mm
vertical adjustability 1700 mm
Swivel boom 260°
L3g0xelz
12 spindle speeds 24-1050 RPM.
9 automatic feeds 0.06 1 mm / Rev
4.8 5.7 kW
Size 4000 x 3800 x 3200 mm
with
-hand-operated multi-plate clutch to thread cutting
-electrical clamp for column, cantileve...
Radial drilling machine Weyrauch prod. 1998 with added floor field , floor plates up to 3 m from basic machine plate.
All machine technical date - see photo in enclosure.
We ensure machine montage worldwide.
More details on the request.
8jxfv8pxl
Arm length 1.500 mm
Drill capacity 50 mm
very less used.
Details to be verified.
Eea7gs3so
drilling capacity in steel (diameter): 60 mm
arm length: 2000 mm
Pr07j3
min./max. distance between supporting surface and boring spindle sleeve: 525/1690 mm
spindle sleeve stroke: 310 mm
spindle taper MK: 5
mounting table: 1900 x 1100 mm
rotations: 30 - 1250 rpm
carriages: 0,08 - 1,35 mm
spindle drive: 5,5 kW
weight: 5700 kg
space needed: 2975 x 1100 x 2950 mm
MAS VR6A radial drilling machine
Brand: MAS
Model: VR6A
Year: 1963
Capacity (kW): 11
Voltage: 380
Frequency (Hz): 50
Dimensions Lxwxh (mm): 3200 x 1100 x 3000
Qtkqgfhs8
Ca weight (kg): 6500
Boom: 2000 mm cube table dimensions (mm): 1250 x 800 x 500 spindle: MK5 included machine vise and cooling plant
The machine is in used but good condition
Original documents are available.
DMG NEF 600 C Axis and Live tools
- Make : DMG Germany
- Type : NEF 600
- Age : 0163 0004 A
- Mach. No. : 2009
- Max. turning Ø bed : 600
- Centre height : 300
- Centre distance : 1.190
Nnx9p
- Spindle bore : 90
- Speeds 3 ranges : 3.000
- X travel : 398
- C Axis travel : 360.000
- Turret positions : 12 stations
- Live tool speed : 4500 Rpm
- Feed rate : 30 M/Min
- HeidenHain CNC PILOT 4290
- Chip conveyor
- Coolant system
- Chuck ROTA-S pl...
Radial drilling machine Fabr. MAS type VR 6 A
Masch.# 219 1963 model
Lrssv
Technical data:
Gr. Drilling capacity at 60 / 25 kg resistance 63 / 80 mm
Gr. Boring capacity 300 mm
Gr. Thread cutting performance M 64 x 4 / M 85 x 4
RADIUS 2000 mm
KL. / gr. Distance spindle and base plate 540 / 1865 mm
vertical adjustment of the jib 950 mm
horizontal adjustment of the jib 1613 mm
Boom 0-360 ° swivel option
Spindle mount Mt 5
Spindle stroke 380 mm
16 spindle speeds 11.2-2000 RPM.
16 feed 0.035 2.8 mm ...
GRB 75-2000
Continuous drilling capacity in E335: 75 mm
Bw9wetzq
Continuous drilling capacity in EN-GJL-200: 90 mm
Boring in E335: 130 mm
Thread cutting in E335 / EN-GJL-200: M 60 / M 80
Short spindle: MK 5
Max. Projection: 2000 mm
Spindle stroke: 420 mm
Drive power: 7.5 kW
Speed range: 24-1400 min-¹
Number of revolutions: 16 mm
Feeds: 0.075-1.0 mm / rev
Feed number: 12 pieces
Advantages of our machines:
with central switching and control
electro-hydraulic clamping of drilling slide and boom
...
Arm length 2.000 mm
Drill capacity 110 mm
F9zkowl
very less used.
-Drilling capacity 75 mm
-RADIUS min. / Max 500 / 2000 mm
-Spindle mount Mt 6
-Drilling spindle stroke 450 mm
-Spindle speeds 20 steps 12-1600 rpm
-Right rotation
-Feed, 18 steps 0.056 3.1 mm/U - drive 400 V / 7.5 kW
-Clamp the boom and electromechanical drill unit
-min / max distance machine bed - drilling tailstock sleeve 450 / 1800 mm
-usable machine bed with 4 T-slots 1250 x 2100 mm
X3lb3cjf
-Coolant system
-Cube table - space requirement approx. B 3500 x H 3600 x T 1500 mm - weight 1...
Nr. 3321:
1 gebr. Radialbohrmaschine MK 5
Fabr. HETTNER
Typ HF 50 E / 2500
Bauj. unbekannt
Arb.-Ber.: MK 5 x 2500 mm
Antriebsleistung: 3,7 / 6 kW
Sonstiges:
Spindelaufnahme MK 5
Drehzahlbereich 30 - 1500 min-1
Vorschuebe 0,05 - 0,6 mm / U
Platzbedarf ca. 3,7 x 1 x 3 m
0to0ilyb
Gewicht ca. 5 to (geschaetzt)
Price EXW D-68642 Bürstadt
Radial drilling machine, boring mill Kolb
guy. A-25/00
Bmpvncjpvj
Year of manufacture 1980
Weight : ca.11 t
Eusladung 2500 mm,Hydraulic clamping
Asquith Drill 9 Ft D2
44" Cross / 40" Vertical
Bi0wa03a
9ft Arm
Running no faults
1 used well-preserved high radial drilling machine
Make: WEBO
Model: BR 63 x 2500
Year of construction: 1960
Machine number: 19
Serial No.: E368
Technical data:
Drilling capacity in steel 63 mm
Drilling capacity in cast 80 mm
Spindle mount Mt 5
Throat depth 2500 mm
KL. Distance from the outer pillar of 350 mm of vertical movement of the boom 900 mm
maximum distance spindle / tabletop 1700 mm
Spindle stroke 400 mm
Spindle 115 mm
Spindle speeds 14-710 RPM
Feed range 0.07-2 mm / Rev
Column diam...
Code 111263
Description Radial drilling machine
Make CSEPEL
Model RFH 100 / 3000
Kpzdp
Serial No. 73089
Year of make 1975
Drilling Cap. in St. 60 / cast iron 100 / 120 mm
Spindle taper 6 MK
Spindle radius 3500 mm
Min/max height spindle / top of base plate 440 – 2100 mm
Arm traverse 1260 mm
Spindle traverse 400 mm
Number of speeds 21 steps
Speed range 18 – 1800 rpm
Feed range 18 0,0375 – 2,0 mm/rev.
Working surface bed plate 3160 x 1550 mm
Motor 15 kW – 380 Vo...
Articlenumber : KB-1845
Make : MAS Kosovit
Model : VR6A
Serial no : 257
Capacity (Kw) : 11
Voltage : 380
Frequency (Hz) : 50
H7kdjqtzs
Dimensions LxWxH (mm) : 3200 x 1100 x 3000
Total quantity in stock : 1
Weight (Kg) ca : 6500
Country of origin : Czech republic
Capacity Length (mm) : 2000 ( Ausladung / uitlading)
Table dimensions (mm) : 1250 x 800 x 500 ( tendre Block)
Ø Diameter (mm) : MK5 spindle
Comments : In very good condition, coming directly from 1st owner
GR-820 Infrateria Oradea Radial Drill Boring Mill
Technical data:
Throat approx. 2000 mm
Total output 12,5 kw
Ogoux
spindle motor 7,5 kw
Tool holder MK 6
automatic feed
spindle diameter approx. 105 mm
spindle stroke 400 mm
Weight 8to
Height approx. 3,5 m
Used Radial drilling machines over 2000 mm arm length
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
