Used Keller Lufttechnik Dosing Device For Additives for sale (32,382)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans Njdjz Ai Tpepfx Ab Uodb One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Nsdpfeziwpljx Ab Uedb Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz Ndodpfovtz U Rsx Ab Usb

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz Ndodpjvtzzkofx Ab Ueb

Condition: excellent (used), functionality: fully functional, 5 Koch separator feeders from a cleanroom production. Only PP without glass fibers was used! The devices are in like-new condition. One device has an additional vacuum discharge valve. 4 machine hoppers. The original new price was approximately €14,500. Ndjdpfx Abjxdfxwe Uob Total price: €4,900.

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) Nodpozf Adgofx Ab Ujdb - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Remote control Nedpfx Abjzz Syvo Uedb Additional USB hardware key for the Maestro CNC program.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, pressing force: 25 t, overall weight: 1,900 kg, Neff straightening press RPH 25 in very good condition, no oil leaks, runs smoothly. Fine and precise control of the pressing force. Outreach: 250 Distance between cylinder and plate: 500 Working stroke: 300, adjustable Working pressure: adjustable Lowering speed: adjustable Forward and reverse stroke: adjustable. With additional shaft alignment device (removable). Table: 420 x 1000, shaft plate: 400 x 1300 Dimensions: H 2.1m, D 1.28m, W 1.0m - 1.3m Weight: 1900 kg Ndodpfx Aez A Dkteb Uob Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Ndjdpfxsz Aquhj Ab Ueb Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed ? Working width 0°. 2,400 mm ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank ? Water spray ? Support wheels ? Support Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Ndjdpjziudmjfx Ab Usb Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ Nsdpfxjztc Nfo Ab Usdb • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: excellent (used), Year of construction: 2017, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift Select robot Year of manufacture: 03.2017 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,669 h in automatic operation Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by a servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: closing of the pneumatic nozzle and dosing device Arburg Multilift Select 6kg robot, traverse Year of manufacture: 11.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic, Axis B - rotation Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Njdpfxszy I Dno Ab Usdb Price: On request

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Ndodpewrp Emsfx Ab Uob Price for Novapac: €19,000 Equipment visible in the las

Condition: used, mileage: 45,000 km, power: 390 kW (530.25 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, color: grey, gearing type: automatic, Equipment: soot filter, Vehicle number: 1424766004 1st owner, accident-free, full service history, non-smoker ---- Additional Features * We also offer financing, leasing, and rental options! * LA1 & LA2 7146 MOONSTONE GREY METALLIC * LZ2 FULL PAINT FINISH * C1W WHEELBASE 3700 MM * W9Z WEIGHT VARIANT 18.0 T (7.5/11.5) * M3E ENGINE OM471, R6, 12.8 L, 390 KW (530 HP), 2600 NM * M4X ENGINE VERSION EURO VI, E * M8B AIR INTAKE, BEHIND CAB, MOUNTED * M7K RADIATOR BLIND * M7T CONTROLLED WATER PUMP * M5V HIGH PERFORMANCE ENGINE BRAKE * M6M TWO-STAGE, CONSUMPTION-OPTIMIZED AIR COMPRESSOR * G5A SINGLE-PLATE CLUTCH * G2E TRANSMISSION G 281-12/14.93-1.0 * N6Z TRANSMISSION OIL COOLING * G5G MERCEDES POWERSHIFT 3 * G5L POWERSHIFT ADVANCED * G0K DRIVE PROGRAM ECONOMY/POWER * N2E NA MB 131-2C, PUMP * Z5M PTO, SINGLE * Z5S PTO PUMP, BELOW FRAME UPPER EDGE * A1Z FRONT AXLE, CRANKED DESIGN * A1D FRONT AXLE 8.0 T * A2E REAR AXLE, RING GEAR 440, HYPOID, 13.0 T * A3D REAR AXLE WITH ACTIVE LUBRICATION, NON-REGULATED * A5G AXLE RATIO I = 2.412 * A1A FRONT AXLE AIR SUSPENSION * J3Z AXLE LOAD MEASURING SYSTEM * R5E ALUMINIUM RIMS 11.75 X 22.5, FRONT, DURA-BRIGHT, ALCOA * R2Y ALUMINIUM RIMS 9.00 X 22.5, DURA-BRIGHT, ALCOA * R0L CUSTOMER-SPECIFIED TYRES FRONT * R0Z WHEEL NUT COVERS * S1Y TYRE PRESSURE MONITORING * A1 W48KBA 75 2 X 385/65 R 22.5 TL HIGHWAY RR STEERING? K? * A2 F38LCB 75 4 X 315/70 R 22.5 TL HIGHWAY RR DRIVE? L? * CZW STEP PLATE ABOVE FRAME, EXTENDED * C5P BOLTED FRAME * C0G REAR FRAME OVERHANG 1050 MM * C6G STEERING, SERVOTWIN * C6I POWER STEERING PUMP, CONTROLLED * C7T REAR INTEGRAL END * K0T MAIN TANK, LEFT * K1N TANK 570 L, LEFT, 650 X 700 X 1450 MM, ALUMINIUM * K3W ADBLUE TANK 75 L, LEFT Nsdpfxswflwls Ab Uedb * K5M LOCKABLE TANKS * K5S PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM * Z4O NARROW TANK CROSS-SECTION * Z4R HIGH TANK CROSS-SECTION * K8D EXHAUST SYSTEM, OUTLET RIGHT SIDE EXTERNALLY, HORIZONTAL * U2G EXHAUST BOX * C8B REAR AXLE MUDGUARD, 2550 MM VEHICLE WIDTH * C8H 3-PIECE MUDGUARD, WITH EC SPLASH PROTECTION * C8I SPLASH PROTECTION (EC), FRONT * C7F FRONT UNDER-RUN PROTECTION (ECE), ALUMINIUM * C8Y UNDERBODY PANELING, AERODYNAMIC * F7A BUMPER, CORNERS PLASTIC * F7C BUMPER, CENTRE PART WITH TOWING EYELETS * C8Z SIDE SKIRTS, AERODYNAMIC * Q4Z FIFTH WHEEL, LOW MAINTENANCE, GREASED LOCK * Q6J FIFTH WHEEL COMPACT, JOST JSK 40K * Q6G FIFTH WHEEL, WITHOUT MOUNTING PLATE * Q6Z FIFTH WHEEL ANGLE, WITH HOLE GRID * Q4L FIFTH WHEEL HEIGHT, H = 190 MM * H2C FIFTH WHEEL OFFSET +600 MM * Q0W FIFTH WHEEL FROM FACTORY * B2A DISC BRAKE, FRONT AND REAR AXLE * B1B ELECTRONIC BRAKING SYSTEM WITH ABS AND ASR * B1F HEATING, ELECTRONIC AIR SUPPLY UNIT * B1H ELECTRONIC AIR SUPPLY & CONTROL, MEDIUM * B4A CONDENSATE MONITORING FOR AIR SYSTEM * B4L COMPRESSED AIR TANKS, ALUMINIUM, COMPLETE * B5D TRAILER STABILITY ASSIST (TSA) * B5J BRAKE AND ELECTRICAL CONNECTIONS, LOW * B2X PARKING BRAKE, ELECTRONIC * B3K SECONDARY OIL RETARDER * F1J L-CAB GIGASPACE, 2.50 M, FLAT FLOOR * F1R L-CAB * F2A FLOOR VERSION, FLAT FLOOR * F2H CAB WIDTH 2.50 M * F2P CAB, 765 MM MOUNTING HEIGHT * F2X GIGASPACE * F4H CAB REAR WALL, WITHOUT WINDOW * F3C CAB SUSPENSION, COMFORT, AIR SUSPENDED * F3W CAB TILTING DEVICE, MECHANICAL-HYDRAULIC * F6D TINTED WINDSCREEN WITH SUN STRIP * F8V LIGHT SENSOR * F8W RAIN SENSOR * D8M ELECTRIC SLIDING/TILTING SUNROOF, GLASS DESIGN * F4X EXTERNAL STORAGE BOX, LEFT * F4Y EXTERNAL STORAGE BOX,

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Nodpfxszy I Adj Ab Uedb Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm Ndodsz A D H Uopfx Ab Ueb - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: good (used), functionality: fully functional, For sale is a used nailing machine from the manufacturer Bohm & Kruse, designed for the production and assembly of wooden crates. The machine is specifically designed for nailing crate parts and also features a riveting device. For safety reasons, the machine is enclosed and equipped with a two-hand control. Technical data / equipment: Manufacturer: Bohm & Kruse Machine type: Crate nailing machine / Nailing machine For nailing crate parts Riveting device available Multi-nailing head Workpiece support / workbench Adjustable workpiece stops Safety enclosure with protective grille included Two-hand control Emergency stop Robust industrial design Nodpfx Abozym Nio Uodb The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Ndodjtqtppspfx Ab Ujb Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Ndedpfoz A D Irex Ab Ujb Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: excellent (used), Year of construction: 2014, operating hours: 3,000 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, Lightly used preset device. The offer also includes the under-table unit and the label printer. The device is in very good condition, see pictures. The item can be inspected while powered on. Ndedpfx Aezni Rrob Ueb Delivery is possible for an additional charge.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Ndjdpfx Ajz A A Dxjb Uob Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Nsdpfszti Tkex Ab Uodb Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! Nedpjz Ag Anefx Ab Usdb For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: good (used), Year of construction: 2015, operating hours: 20 h, functionality: fully functional, Indexing hand device for grinding and milling machines as well as other applications. Robust cast body on swivel angle and base plate. Interchangeable T-slot nuts 10 mm. Comes with reduction sleeves MK6 - MK5 and MK6-SK50, index plate T24. Additional index plates with other divisions used, unit price € 60.00. Used clamping devices – please inquire. Ndedpfoyxyxkox Ab Uob

Condition: used, Year of construction: 2020, Used extraction system, also suitable for high-alloy metals The system comes from a reputable industrial company and is being sold due to a relocation. Additional accessories, such as extraction arms, etc., are not included; it was connected to a robotic welding cell. The price is for self-dismantling; dismantling can also be offered for an additional charge. Manufacturer: KEMPER Nodpsz Apkzefx Ab Usdb Model series: WeldFil Compact Type: 3440502 / 34 40 502 Year of manufacture: 01/2020 Design: Outdoor Control: Siemens Sinumerik, touchscreen FILTER SYSTEM Filter stages: 1 Dust class: M W3 approval according to EN ISO 15012-1 W3 separation rate: ≥ 99% Suitable for welding fumes from high-alloy metals PERFORMANCE DATA Extraction capacity: 2,750–3,960 m³/h Negative pressure: 2,050–2,700 Pa Motor power: 4 kW CONTROL / EQUIPMENT Demand-controlled extraction capacity Automatic, continuous regulation of fan output Constant extraction capacity at the workstations Siemens Simatic system control External terminal with touchscreen display PIPING / ACCESSORIES SparkTRAP pre-separator NW 355 For almost complete separation of sparks and glowing particles before the filter system With dust collection container Equipment for optional intake/exhaust operation: 2-way distributor Ø 355 mm KEMPER dosing unit for extraction and filter systems System 8000/9000 Automatic dosing of the filter aid depending on operating hours or cleaning cycles via SparkTRAP for protection against sparks and filter fires