Used Knuth A Ahk32125 for sale (67,314)

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages Nsdoz R I U Iopfx Airslh ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: used, Year of construction: 2008, machine/vehicle number: 08063895, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, KNUTH B180 For sale is a robust and reliable miter band saw for metalworking. Technical data: Cutting capacities: * 90° rectangular: 180 × 290 mm * 90° round: 180 mm * 45° rectangular: 100 × 120 mm * 45° round: 100 mm Band speeds: Nsdpfjy R T R Rox Airslh * 22 / 33 / 45 / 65 m/min Drive: * Main drive motor power: 0.75 kW * Supply voltage: 400 V Dimensions & weight: * Blade dimensions: 2360 × 20 × 0.9 mm * Machine dimensions: 1244 × 457 × 1580 mm * Weight: approx. 105 kg Features & advantages: * Precise miter cuts * Robust and stable construction * Multiple adjustable blade speeds * Ideal for steel, stainless steel, and other metals * Suitable for workshops and professional applications Condition: used / fully functional Inspection and test run possible by appointment If interested, please get in touch.

Condition: used, Year of construction: 2007, x-travel 350 mm y-travel 210 mm z-travel . mm digital readout ja table surface area 800x 240 mm turning speeds 115-1750 U/min feed . m/min throat . mm spindle stroke . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nsdpfx Ajzk Rczeirjlh About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Nljdpfx Ajziaggjireh Technical Specification Taper Size BT 50

Condition: used, Knuth UFM 2 Universal Milling Machine Technical Data Travel range X-axis (manual) 800 mm Travel range X-axis 750 mm Travel range Y-axis 300 mm Travel range Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle nose and table 0 - 400 mm Head swivel 45° Horizontal spindle taper SK 50 Drive Main motor power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Coolant pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and Weight Dimensions 1900x1720x1750 mm Weight 2100 kg Nsdpfx Aisnfu Rierelh More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2016, Machining center Nlsdjtiauhepfx Airjh Make KNUTH Type EcoMill 350 CNC

Condition: good (used), Year of construction: 2001, Power: 4.5 kW Drilling capacity: 30 mm End milling: 25 mm Motor power: 0.85/1.5; 2.2 kW Nedpfx Aiozvnldjrjlh

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Nodpfozhh Uvox Airelh Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: used, Year of construction: 2008, machine/vehicle number: 147233, Ref. no. 20312 Technical Data: - Workpiece thickness: 0.8 to 51 mm Nlodpfx Ajylylisirjh - Max. working width: 1370 mm - Max. grinding height: 100 mm - Grinding diameter: 150 mm - Grinding speed: 1720 rpm - Feed rate: 3.7 m/min - Drive: 400 V / 9.7 kW - Working height: 1100 mm - Space requirement approx.: W 1700 x H 1200 x D 1200 mm - Weight approx.: 800 kg - Separate mobile motorised grinding dust extraction unit

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Nsdj Ad Iw Hopfx Airelh Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. Nlsdpfx Aj Adrpaeiroh INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28.

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm tool taper SK40 spindle turning speed range 110 - 1230 U/min table-size 270 x 700 mm total power requirement 3,7 kW weight of the machine ca. 900 kg Nedpozx Hfbjfx Airslh dimensions of the machine ca. 1400 x 1400 x 1700 mm Features: - 3-axis digital display - Milling head swivels ± 45 degrees - Coolant system - User manual

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Strokes/min: 42 Nlsdsw Naghjpfx Airjh Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control • Cutting line illumination • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Lathe KNUTH SH150H/610 R, year of manufacture 1988 Chuck: 200 mm, spindle bore: 36 mm. Power supply: 16A / 380V. Njdpsz Hkn Tsfx Airolh No sales to private individuals.

Condition: good (used), Year of construction: 2002, Drilling and Milling Machine Manufacturer: KNUTH Type: TBF 500 Year: 2002 with coordinate table Spindle taper: MK4 Spindle speeds: 125-2500 rpm Motor power: 1.1 kW Table travel: X 500 mm, Y 160 mm Max. installation height: 300 mm Spindle stroke: 130 mm Table size: 200 mm x 730 mm Machine dimensions: Width 1000 mm, Depth 800 mm, Height 1800 mm, Weight approx. 350 kg In good condition. Nlsdoy Spubjpfx Airoh

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm voltage 400 V total power requirement 4,7 kW weight of the machine ca. 1,1 t Nodpexa Hf Rjfx Airelh dimensions of the machine ca. 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hundegger K1A Used machine, available from a Swiss liquidation, in good condition. Includes infeed and outfeed systems. Nsdo Afhm Ropfx Airjlh Mechanized.

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min quill stroke 60 mm weight of the machine ca. 1,5 t dimensions 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet Nsdpfx Ajw Tdxijirjlh - Counter Bearing - Chip Tray

Condition: used, Year of construction: 1995, machine/vehicle number: UWIIA/3472/95, grinding wheel diameter: 300 mm, grinding length: 400 mm, center height: 150 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Nledpj Aa Aipsfx Airsh Machine type: Universal CNC tool grinding machine Condition: very good Working Area Grinding diameter: max. 300 mm Grinding length: 400 mm Workpiece length: 520 mm Center height: 150 mm Distance between centers: 350 mm Grinding table stroke: 550 mm Grinding Table Table speed: 0.005–5.0 m/min Grinding Spindle Grinding spindle speed: 250 / 3,750 / 5,000 / 7,500 rpm Speed stages: 4 Grinding wheel diameter: max. 250 mm Swivel range of grinding spindle head: 11–60° Drive power of spindle motor: max. 3.0 kW Control and Axes Control: Siemens 810 G3 Axes: 4 Performance Data Total power requirement: 7.7 kW EQUIPMENT Electronic handwheel Spindle lead correction Hydraulic collet chuck FORKARDT OVERZ-BR Coolant system Automatic central lubrication Enclosure with movable viewing window at the operator station Separate control cabinet Safety emergency stop on the control cabinet Machine light Siemens servo drives

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: C107230, We are offering a well-maintained Emmegi PHANTOMATIC T3 A CNC machining center, ideal for processing aluminum and light alloy profiles. Machine Details: Manufacturer: Emmegi S.p.A. (Italy) Model: PHANTOMATIC T3 A Year: 2009 Serial Number: C107230 Power: 7.5 kW Voltage: 400 V / 3-phase Current: 16 A Frequency: 50 Hz Weight: 1950 kg Emmegi T3 A specifications: X 4300 / Y 270 / Z 300 mm, 5.5 kW spindle, 4-tool standard magazine (8 optional), 4 standard clamps and machining length up to 4000 mm Nledpfjy Idm Rex Airjh Description: The PHANTOMATIC T3 A is a versatile CNC machining center designed for milling, drilling, tapping, and cutting operations on aluminum profiles. Known for its reliability and precision, this machine is suitable for window, door, and façade production, as well as general aluminum fabrication.2Emmegi

Condition: used, Year of construction: 2015, operating hours: 16,215 h, functionality: fully functional, machine/vehicle number: Robot: 2600-104749 / Controller: 2600-104749, overall weight: 422 kg, load capacity: 20 kg, arm reach: 1,650 mm, ABB industrial robot with IRB 2600-20/1.65 Type A manipulator and IRC5 M2004 controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. The payload is 20 kg with a reach of 1650 mm. Manufactured in 2015, it has 16,215 operating hours and runs RobotWare software version 5.61.8001.08. It is equipped with a FlexPendant teach pendant, a power cable, and two connection cable sets. Nljdpfxjzamiqo Aireh

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: fully functional, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Nlodpfx Aiszxx Dvorjh

Year of construction: 2017, condition: used, Working width: 2500mm, an on-site inspection is possible, not under power. Nlodpozy Rvyefx Airsh

Year of construction: 1995, condition: good (used), functionality: fully functional, Automatic sheeting machine for joining single-face/corrugated cardboard sheets, complete with delivery system featuring a sheet turner and palletizer. Nsdpjz Ibmiofx Airelh Maximum sheet size: 1400x1600. Machine dimensions: - Length: 16630mm - Width: 4330mm - Height: 3350mm

Condition: good (used), Year of construction: 2002, machine/vehicle number: 025137, Offer 24190 Technical specifications: - Drilling capacity: 25 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 140 mm - 8 spindle speeds: 100 - 2900 rpm - Min./max. distance spindle/table: 110 / 405 mm - Work light - Quick-action drill chuck - Coolant device - Machine vice - Machine base - Drive: 400 V / 0.75 kW Nljdpewyl H Nefx Aireh - Required space (W x H x D): 400 x 1250 x 600 mm - Weight approx.: 200 kg