Used Kuhlmeyer Efs 550 for sale (3,050)

Condition: used, machine/vehicle number: H2X393G05053, Year of construction: 2016, operating hours: 15,338 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,650 mm Fork spreader: 550–1,940 mm Fork length: 1,800 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Diesel Next service: in 461 hours UVV certificate valid until: 06/2027 Dimensions (L x W x H): 4,700 x 1,250 x 2,190 mm Operating hours: 15,338 h EQUIPMENT 3rd and 4th valve Full cab Heater Windshield wiper LED work light, front LED work light, rear Comfort seat Fork spreader with side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Nwjdpszz Hr Tjfx Ab Ujl Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 173

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Nodpey Eyy Uofx Ab Uowl Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers

Condition: good (used), Year of construction: 2014, Lifting capacity: 550 kg. Weight: 100 kg. Nwedpfx Aex Dtfreb Uol Condition: good, second-hand

Condition: good (used), 550 m² Stow storage mezzanine Used, good condition, see pictures. Length approx. 27m Width approx. 24m Height, top edge, 1 level approx. 4.3m Height, bottom edge approx. 3.88m Load capacity per m² 500 kg Upright type: Hollow section profile 120/120 Stairs, railings, transfer station, lift and much more available! Negotiable price: €70,-- net per m² Partial sale and CAD planning possible. All plans and structural calculations available. Storage mezzanine already dismantled, loaded by the seller. Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information on request. Nwodpfx Ast Iv H Tsb Uol Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking used & new Description: Are you looking for high-quality storage racks to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel platform mezzanines immediately available • Weekly 30-50 semi-trailer truck shipments for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a comprehensive all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Carrying out auctions on behalf of customers. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you found us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Year of construction: 2004, Grinding wheel diameter: 500 mm Nwjdpfx Ajzvm N Usb Uol Grinding table width in front of the wheel: 240 mm Grinding table tilt downwards/upwards: 45/30° Grinding wheel speed: 1500 rpm Drive motor: 400 V, 4 kW Weight: 280 kg

Condition: new, Year of construction: 2022, Exhibition machine Panel thickness: 8 - 50 mm Edge thickness: 0.3 - 3 mm Solid edges up to 5 mm 7" touchscreen Release agent spraying at the infeed Nwsdpozvapusfx Ab Uol Pre-milling with two diamond milling heads Infrared preheating lamp Top-mounted, interchangeable gluing unit (including a second glue reservoir) Cross-cut saw unit Flush trimming unit R1 Corner rounding unit Nesting scanning rollers Profile trimming unit Glue trimming unit Spraying unit for finishing Smoothing unit New machine, available after exhibition

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. Nwedsy Encwopfx Ab Usl 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Njdpozzvyyjfx Ab Uowl

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 550 mm, total length: 7,500 mm, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, saw blade bore: 32 mm, Emmegi Twin 550 double mitre saw for aluminium and PVC. The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor from 45° (internal) to 22°30’ (external) with a precision of 240 positions per degree. The machine features the following accessories: -Preparation for a label printer, which enables labelling and assignment to the corresponding order -Retractable material support -Support for long profiles (roller conveyor) -Industrial PC with Windows Embedded -Additional tensioner on the roller conveyor -Pro software package -Overlength cut -Cross cut -Shortcut Nwedpezak Iqefx Ab Uel -Automatic cut -Connection to window construction software (orgadata / Unilink / Wictop...etc) possible Well-suited for precise and industrial processing of profiles in window and door manufacturing.

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck Nwedpfxoyxyz Se Ab Uol 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Subject to prior sale.

Condition: used, Heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry/Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Nwodpfez D Szcsx Ab Ujl Main motor 11 kW 3 speeds 2500/3000/4200 rpm Miter stop with length compensation Saw blade up to 550 mm diameter Electrically adjustable lifting and tilting of the saw blade with digital display Machine from retirement sale / first delivery in 2011 Machine has been WORKSHOP-TESTED and is in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch

Condition: used, Year of construction: 2014, operating hours: 7,700 h, Equipment: all wheel drive, JCB 550-80 WM Year of manufacture: 2014 7,700 hours 4x4 ALL-WHEEL DRIVE Lifting capacity: 5 tons Nedpfx Abeytl Ils Uewl Lifting height: 8 m Engine: 93 kW / 127 hp Weight: 11,250 kg German machine Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will gladly take care of your financing or leasing options. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2,000 Our services for you: - Customs registration - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Nwjdpfswv Tm Nex Ab Ujl Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon probe Chip conveyor Spindle cooler IKZ (internal cooling system) 21926ä

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Specifications: Nsdpfjykn T Sjx Ab Uewl Capacity: 550 L Construction Material: Stainless Steel Horsepower: 5 hp Dimensions: 44.8819 x 32.0866 x 39.9606

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Nwjdpfx Ajxq A Hlsb Ujl Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) Nwedpfx Aboz Epnvj Ujl CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) Nwedpfx Abozy R Rkj Uel • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Nodpozimqxofx Ab Uewl

Condition: refurbished (used), Year of construction: 2023, COLD FORMING CARLO SALVI 550/SV Completely Refurbished by HBR srl Possibility of having the version RF (with semitubular group). Machine with quick change system on K.O. cams. Range production: min. and max. wire diam.: 2 - 4,76 mm. Nwedpoqhndmjfx Ab Ujl max. cutoff length: 65 mm. max shank length: 50 mm. max production per min: 500 Motor Power: HP 7,5

Condition: good (used), functionality: fully functional, The Z-conveyor belt from MFP, featuring timed operation, is for sale. Specifications: Width: 1400 mm, with hopper, 150 mm, along the entire length Inclined belt: 1400 mm Discharge belt: 550 mm Nwodpfxjzu Iv Tj Ab Usl Belt speed: 3 m/min With timed operation Mobile New belt with 30 mm high cleats, spaced 330 mm apart.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Formcook mod Combi 650 1.108EFS Teflon belt fryer whit flip on the middle year of construction 2011. Nwodpfx Asxl Tucsb Uel Belt wide 650 mm.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Nodpfxez Ar E Ie Ab Uewl Manufacturer: MAG / FFG Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Nwsdpfjzg Nbhsx Ab Usl Documentation available Sold with protective cover.

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Price negotiable Njdpfoy Tivujx Ab Uswl

Condition: refurbished (used), functionality: fully functional, Lathe Brand: ERNAULT Model: CHOLET 550 Distance between centers: 1000 mm Center height: 250 mm Max. diameter over bed in front of faceplate: 550 mm Max. diameter over bed: 500 mm Max. swing in gap: 710 mm Spindle bore: 52 mm Morse taper: No. 5 Nwjdpfsyapkwjx Ab Uel Max. cross slide travel: 350 mm Power: 11 hp