Used blow molding machines for sale (34)

Condition: ready for operation (used), Year of construction: 2008, screw diameter: 90 mm, overall weight: 13,000 kg, clamping force: 120 kN, Blow moulding machine manufactured in 2008. This AUTOMA APEX AT500D features a screw diameter of 90 mm and a clamping force of 120 kN. It has a plasticizing capacity of 200–130 kg/h and a horizontal stroke of 500 mm. If you are looking to get high-quality blow moulding capabilities, consider the AUTOMA APEX AT500D machine we have for sale. Contact us for further details. • Extruder: E904-WT AC • Screw speed: 69 rpm • Extruder motor power: 65 kW • Heating power: 24 kW Pedpfx Alez Hdlrowsrb • PE/PP plasticizing capacity: 200–130 kg/h • Horizontal stroke: 500 mm • Dry cycle time: 2.4 s • Air pressure: 6–8 bar • Pump motor power: 22 kW • Total installed power: 77–115 kW • Minimum water pressure: 3 kg/cm² • Maximum cycles: 14/min • Number of cavities: 3 + 3 • Distance between axes: 100–135 mm • Maximum container length: 85–120 mm • Maximum container height: 350 mm • Capacity: 1 L • Maximum mould width: 495 mm • Maximum mould height: 460 mm • Mould thickness: 170 + 170 mm • Opening: 265 mm • Condition: Operational

Condition: used, Year of construction: 2012, operating hours: 17,600 h, machine/vehicle number: SO140, Used KOSME blower unit 6 cavity - 12000 BPHTechnical Specifications & Performance DataThis rotary blow molding machine by KOSME delivers reliable PET bottle production with a proven 6-cavity configuration. Optimized for beverage production and industrial packaging, it achieves a maximum output of 12,000 bottles per hour on the 0.5L format. An energy-saving ceramic oven and an additional air recovery system support efficient operation, reducing both power and compressed air consumption. The machine comes customized for 28 mm neck finishes, aligning with common beverage closures used in water and CSD packaging.Manufacturer: KOSMEYear: 2012Architecture: RotaryNo. of cavities: 6Maximum output: 12,000 bottles/hour (0.5L)Container type: PET bottlesNeck finish: 28 mm customizationHeating system: Energy-saving ceramic ovenAir system: Additional air recoveryElectrical: 400 V, 50 Hz, 27 kWOperating hours: 17,600 hoursAdvanced Automation & Control SystemsThe machine features a robust control panel for process set-up and monitoring, supporting stable heating profiles across the ceramic oven zones and precise blow parameters for consistent bottle quality. Recipe-based settings streamline format optimization while minimizing operator intervention. Safety guarding and interlocks protect operators during production and changeovers, and the system supports efficient warm-up and standby modes to reduce energy use during short stops.Production Line Integration CapabilitiesDesigned for seamless integration in a used bottling line or as a standalone stretch-blow module, this unit interfaces easily with standard preform handling systems and downstream PET filling, labeling, and secondary packaging machinery. It supports beverage production workflows where high efficiency and quick synchronization with conveyors and accumulation systems are required.Inline or standalone operationCompatible with standard preform handling equipment (elevator, tipper, unscrambler)Interfaces with PET fillers, labeling machines, shrink wrappers, and palletizersFormat noted: 0.5L; additional sizes can be configured with appropriate toolingMachine Condition & Maintenance HistoryThe machine is currently in production and reported in very good condition. It has approximately 17,600 operating hours and has recently undergone its scheduled 18,000-hour maintenance. Documentation is available to support commissioning, operation, and maintenance activities, ensuring a smooth start-up in a second hand or upgraded industrial packaging environment.Currently in productionVery good conditionRecent 18,000-hour maintenanceManuals availableOperational Performance & VersatilityWith a 6-cavity rotary platform and energy-saving ceramic oven, the machine offers stable production at 12,000 bph on 0.5L PET bottles. The additional air recovery system enhances efficiency by redu... Podpfsz E Dh Rsx Alwerb

Condition: used, Year of construction: 2018, functionality: fully functional, If you have any questions or need more information, feel free to send us a message or give us a call. Prodpfxjz D T Auo Alwsb

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, performed by Davies-Standard LTD Net price: 45,000 EUR Psdpfxozfxwis Alwsrb

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Prsdpfxjvddkvj Alwsb Very good condition

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke Pjdpez Euubefx Alwerb • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: used, Year of construction: 2008, machine/vehicle number: SO145, Used PLASTIBLOW PB1H-D blow molding machine - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold) Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz electrical supply. Its double-carriage arrangement supports alternating mold movements during the blow molding cycle, helping organize bottle production around the molding process. The single-head layout is intended for a two-bottle 1.0L production configuration.For a used bottling line or dedicated plastic packaging installation, the machine should be integrated with suitable electrical protection, process controls and operator-access safeguards appropriate to the final production environment.Production Line Integration CapabilitiesThis Plastiblow blow molding machine can serve as the bottle-production stage of a PET or plastic container packaging system, depending on the material and tooling installed. It can be positioned upstream of downstream bottling equipment such as rinsing, filling, capping, labeling and secondary packaging machinery.The double-carriage configuration is suited to installations requiring a compact bottle manufacturing process before beverage production or other industrial packaging operations. Mold selection, neck finish, bottle geometry and resin compatibility should be matched to the required container specification and the downstream filling line.Machine Condition & Maintenance HistoryThis 2008 Plastiblow PB1H/D blow molding machine is presented as ready for operation. The available identification data confirms the machine model, electrical supply and CE marking. Before commissioning, routine inspection of the extrusion system, molds, cooling circuits, pneumatic equipment, safety devices and electrical components is recommended as part of normal installation and startup procedures for second hand machinery.Operational Performance & VersatilityThe PB1H/D is configured to make two 1.0L bottles at the same time using a single extrusion head and double carriage. This arrangement supports repeatable production of matched bottle formats where a two-cavity mold configuration is required.Blow molding equipment of this type forms hollow plastic containers for use across industrial packaging applications. Final production capability depends on the installed mold set, extrusion tooling, resin, process settings and au... Psdpfoz E Dfpjx Alwerb

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Prsdpfoz E Dfisx Alwob

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Prodpfxezw D Haj Alwsb Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, For sale: Complete PET bottle blowing line TES BluLine4 HiTech MultiFlex (2017) We offer for sale a complete PET bottle production line from the renowned manufacturer TES Sp. z o.o., model BluLine4 HiTech MultiFlex, manufactured in 2017. The machine is in very good technical condition, regularly used, and ready for further operation. Technical data Manufacturer: TES Sp. z o.o. Model: BluLine4 HiTech MultiFlex Year of manufacture: 2017 Bottle capacity range: 0.5 l – 4 l Number of cavities: 2-4 The line includes: Predpfx Alozd Sb Sjweb ✅ Preform feeder ✅ PET bottle blowing machine ✅ Bottle packer for trays Advantages of the equipment Complete and ready-to-use production line Universal range of produced capacities Solid construction and proven TES technology Very good technical condition Ideal for manufacturers of beverages, water, household chemicals, and other products packaged in PET bottles Price: negotiable. If you have any questions or would like to obtain additional information, please contact us by phone or private message. We will gladly provide detailed information and send additional photos of the equipment.

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Psdpfx Asthk Rzolwerb

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Podeztwmfjpfx Alworb

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Model: MGL2D This blow molding machine is fully functional. It is still in production and can be inspected by appointment. Videos can be provided upon request. Prsdoxxp Tbjpfx Alwsb PRICE REDUCTION!!! From 21,000 to 19,000 EUR!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 271/1, overall weight: 700 kg, Semi-automatic PET bottle blowing machine for producing 5-gallon PET bottles. Predpfszd Tdusx Alwjb Includes heating and blowing unit. Supplied with 2 sets of 5-gallon blowing molds. Capacity: 60 bottles/hour.

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Predpoquuvrofx Alwjb Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. Receiver tank - Low pressure - MAX 16Bar 4. Receiver tank - High pressure - MAX 45Bar

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: Podpfx Asv Iflpelworb • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Pedeutni Rspfx Alworb Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine – ZENTRONIK ZR-7 1. Heating oven for PET preform heating 2. Semi-automatic PET bottle production machine Mould: double-cavity for 5.0L bottles (48 mm cap) Output: approx. 800 bottles/hour Prodpfxownzdao Alwjb Technical condition: used, operational

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Pedpfx Alswa Rhrowjrb Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. The extruded material is formed into a parison, which is then molded into the final product. Pjdjx R R Igepfx Alworb

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1 unit of used blow molding machine Prjdpfoynutmox Alwsb Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of manufacture: 1999 Clamping force: 120 tons Extruder type: 120/24 WT Accumulator head: BFKS25, equivalent to approx. 17.75 kg The machine can produce containers up to a size of 200 liters. A tool for a 120-liter container with a press-ring closure is available for the machine. Video available!

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Podpfx Aloyhbt Howjrb Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams Prodpfsg Ailcjx Alweb 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used Molding Machine MRT 3503 R for big container in HDPETechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing (1.000/2.000/5.000L Tanks). The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integrated into a broader production line with downstream trimming and quality checks. The generous envelope (3500 mm spherical diameter) and multiple carriages support high throughput configurations and flexible tooling strategies. I... Prjdpsziyy Hjfx Alwsb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. Prodet Akgwjpfx Alwsb The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000