Used Kunzmann Wf 4/3 Tnc 124 for sale (92,695)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights Lsdou Tln Njpfx An Ijhi - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel Lsdpfxow A Af Ie An Ishi - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kunzmann WF 610 MC tool milling machine with Heidenhain TNC 620 control – in SUPER condition, CE compliant! Technical data: >> Year of manufacture 12/2017, machine no. 610759 >> Fixed angular table >> Speed up to 5000 rpm >> Feed rate, continuously adjustable in 3 axes, from 0 to 2000 mm/min >> Travel ranges X/Y/Z: 610/400/450 mm >> Table surface: 800 x 425 mm >> Table load: 300 kg >> Vertical quill stroke: 70 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Space requirement approx.: 1.8 x 1.9 x 2.3 m >> Power: 23 kVA Accessories and equipment: >> Heidenhain TNC 620 control >> Hydraulic clamping, vertical and horizontal >> PC additional keyboard for TNC 620 >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Electronic handwheel HR510 FS Ledpezl D S Sjfx An Ijhi >> Coolant system >> Cabin >> Machine feet About the machine: Offered is a Kunzmann WF600 MC tool milling machine with a Heidenhain TNC 620 control. This universal milling machine is in very good condition. It features a very user-friendly control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal configuration is very easy, thanks to the fold-away vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Tool milling machine Kunzmann WF 600 CNC with Heidenhain iTNC 530 control – CE compliant!! Technical data: >> Year of manufacture 2012, machine no. 610149 >> Fixed angular table >> Speed up to 5000 rpm >> Feed rate, stepless in 3 axes, from 0 to 2000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Table area: 800 x 425 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2200 kg Lodpfxozl D Itj An Iohi >> Space requirement approx.: 2.4 x 2.2 x 2.1 m >> Power 18 kVA Accessories and equipment: >> Heidenhain iTNC 530 control >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Coolant system >> Enclosure >> Machine feet About the machine: Offered for sale is a Kunzmann WF600 CNC tool milling machine with a Heidenhain iTNC 530 control. This universal milling machine is in very good condition. It features a very easy-to-use control system. Furthermore, the machine has a hydraulic chuck for both vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: ready for operation (used), Rexroth MAC071B-0-TS-3-C / 095-A-2 / S001 Permanent Magnet Motor, Model No.: R911241380, Serial No.: MAC071-92272, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpfei D Nfqox An Ijhi

Condition: ready for operation (used), Rexroth / Indramat MAC071C-0-GS-3-C/095-L-0 Permanent Magnet Motor, part number: R911248879, serial number: MAC071-57295, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhsdpsi D Nbijfx An Ioi

Condition: new, Rexroth MAC117B-0-WS-4-C/130-A-1/WI1521LV Permanent Magnet Motor, Part No.: R911245926, Serial No.: MAC117-00854, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Lodpfxsi D Ngno An Ishi

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 400 mm z-travel 400 mm Spindle Speed 4.000 U/min. table surface area 800 x 425 mm tool taper SK 40 feed 2.000 mm/min Lhedpjyv N Hfofx An Iji total power requirement 5 kW machine weight ab. 2.000 kg

Condition: reconditioned (used), Year of construction: 2003, Manufacturer: STAHL CraneSystems Type: SH6063-12 4/1 L3 Year of manufacture: 2003 Load capacity appr.: 25,000 kg Hook path appr.: 10,000 mm Track width appr.: 2,800 mm Drive unit group: FEM/ISO 1Am/M4 Working speeds: Hoist appr.: 0.5/3.1 m/min Cross travel appr.: 1.0/20.0 m/min Certification of the remaining useful life of approx. 80% by an inspection expert. Lsdekn Snrjpfx An Ijhi Equipped with: - with hook block - two lifting speeds - trolley with drive

Condition: used, Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW -Construction: B5 Lhedpoc U Tzxofx An Ioi -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

Condition: used, Power supply unit, DIN rail Lodpfjb N E Hkex An Ishi -Type: TSP 360-124 -Weight: 1.4 kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier Ljdpfx Ajwd N S Den Iohi -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 275-HD-283-112-4 -Manufacturer gear Lenze type: 12 435 28 10 HU Lhodod D Nfkjpfx An Ioi -Manufacturer Motor Bauknecht Type: 112M R 4 / 4-75 -Motor power: 4 KW -Speed range: 7.4-42.3 rpm -Motor: adjustable -Number: 1 piece of motors available -Price: per piece -Hollow shaft: Ø 70 mm -Dimensions: 620/600/H560 mm -Weight: 152 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm Lhodpfx Anjkxhpuj Ioi -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: good (used), Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) Lodpeb A Tffofx An Ijhi -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V

Condition: used, Year of construction: 1983, functionality: fully functional, feed length X-axis: 460 mm, feed length Y-axis: 200 mm, Universal milling machine Kunzmann UF6/3 Lhodpfozmfz Dsx An Ioi Year of manufacture: 1983 The machine is in good condition, and the spindle runs very smoothly. The feed motor has been fitted with new carbon brushes, and the Z-axis spindle has a new telescopic spring. The cam control system in 3 axes is perfect for the production of small series. --- Price net plus VAT (shown on invoice) --- Travel distances, feed/manual - Longitudinal: 450/460mm - Transverse: 190/200mm - Vertical: 400/410mm The milling head can be adjusted by approximately 100mm by hand, which increases the transverse working area. Table clamping surface (surface with 3 T-slots): 860 x 265 mm T-slots: 14mm Spindle speeds, horizontal: 30-1280 RPM Spindle speeds, vertical: 50 - 2150 RPM Feeds: 0-1000 mm/min, stepless Feed, vertical: 0-250mm/min Rapid traverse: 1000 mm/min Vertical milling head with fixed quill Tool holder: SK40 (Ott system) Distance, table - spindle lower edge: 440mm Accessories: - Manual - Counter support for horizontal milling - Cam control system in 3 axes (adjustable cams for switching off the feed) - Chip tray Drive power: 2.6/3.2 kW Connection: 400V three-phase Space requirement: approx. 1250 x 1200 x 1800 mm Weight: approx. 1300 kg Shipping by freight forwarder on request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 4, clear span: 2,700 mm, load capacity: 9,000 kg, pallet spaces: 108 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 34,000 mm, support length: 2,700 mm, 4 rows of pallet racking (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 crossbar levels, load capacity 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws Lodpszk Dtmofx An Iehi - 64 floor anchors (ZZBA1210) - 48 individual crossbars (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire area of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), Siemens 6FM1706-3AA20 Positioning/Counting Module WF706 E-Stand A / 3 SN11458, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhjdpfxei I I D No An Iji

Condition: new, Röhm PKF-150/3 ZA124 KA No.: 33902 3-jaw precision chuck 150-0.75 stroke Id.-No.: 429818 P0103 Operating pressure 2-10 bar, max. 5000 rpm. Serial no.: 586-009150-00, unused in opened original packaging, 100% functional, scope of delivery as per photos. Ledpfx Anex Eub Hs Ijhi

Condition: ready for operation (used), Mikron angle table for WF51D / TNC machine. Length: 100 cm / Depth: 49 cm / Height: 44 cm, used, in good condition, 100% functional. Delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Ljdoy Nryzspfx An Ishi

Condition: ready for operation (used), Heidenhain UV 140 power supply unit Id. 335 009-02 SN:9962124A, the item has been fully overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhsdpfx Anex Etnfj Iji

Condition: ready for operation (used), Heidenhain TE 420 313 038-12 TNC - control panel without rotary switch, used, in good condition, 100% functional, delivery as per photos Lhjdpfxsy Nqt He An Iei

Condition: ready for operation (used), Siemens 6FX1131-5BA01 connection E-version: D SN:124 + 6FX1137-3BA00 interface extension, used, normal signs of use, 100% functional, delivery as per photos Ledpfx Asxagp Aon Iehi

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 12 476 309 A, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Lhjdpox Eruksfx An Iji

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, shelf load 3000 kg. Lhjdszg Am Dopfx An Iei - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single beams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.