4-axis CNC drilling and milling machine, overhauled in 2020 with indexing unit as rotary axis, machi

IXION 30 CNC W + HEIDENHAIN TNC 415

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW Nlodpfx Ajxap Eajkfoa weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: used, Year of construction: 2015, operating hours: 10,700 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 48 kVA, controller model: Heidenhain TNC 640, table width: 800 mm, table length: 650 mm, rotary table diameter: 650 mm, overall weight: 11,600 kg, spindle speed (max.): 20,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used DMG MORI DMU 75 monoBLOCK universal machining center, year of manufacture 2015. Machine type: DMU 75 monoBLOCK Serial number: 12430004943 Year of manufacture: 2015 Maximum spindle speed: 20,000 rpm Weight: 11,600 kg Phases: L1, L2, L3, N, PE Connected load: 48 kVA Maximum operating current: 70 A Fuse protection: 80 A Short-circuit current: 0.80 kA Motor voltage: 440 ±10 V Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage AC: 230 V Auxiliary voltage DC: 24 V Internal coolant supply: 40 bar Tool holder: SK40 Operating hours: CNC on: 33,043 h Machine on: 30,184 h Program run: 13,471 h Operating time: 10,700 h Njdpey Dq Hpofx Akfjla If you have any questions or need further information, please do not hesitate to contact us. The machine is located in Osterode/Harz and can be inspected by appointment. This is a used machine and therefore sold with exclusion of any warranty.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. Nlsdpfx Akeymcvmsfea • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes Nsdpfx Aeyrndmjkfjla AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) Nsdpfxjxtp Hwe Akfjla B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools WEIGHT 52T

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Nlsdpfx Ajv N Di Ajkfoa Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Nljdpfx Asyrirrokfea Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Nljdpfxex D Ux Tj Akfea Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Nljdpfowhm S Nox Akfsa Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Year of construction: 2004, condition: ready for operation (used), X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible. Nlsdeylbq Hjpfx Akfsa