Used Laminating Installation for sale (9,906)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Berlin
6,575 km
Slitter Rewinder
DCMLeopard LMA
Call
Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm
Minimum parent roll width: 600 mm
Maximum parent roll diameter: 1500 mm
Maximum parent roll weight: 2500 kg
Maximum unwinding tension (Ø1500 mm): 600 N
Pedpfx Aloyx Uy Ajwsrb
Minimum unwinding tension (Ø1000 mm): 40 N
Minimum standard slitting width: 100 mm
Maximum rewinding width: 1400 mm
Maximum rewinding diameter: 1050 mm
Maximum rewinding weight: • Ø76 mm shaft: 600 kg
• Ø152 mm shaft: 1000 kg
Maximum rewinding tension: 600 N
Maximum production speed: 600 m/min
Power supply: 3 x 400V 50Hz
Installed power: 30 kW
Compressed air: 6 bar, dry
Materials to be slit:
• Paper-based / liner-based packaging laminates.
• Board from 80 to 300 g/m².
Unwind section:
A separate between-centers unwinder, type T9, 1500 mm diameter, including:
• Hydraulic cylinder control for lifting parent rolls from the floor.
• Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller.
• Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores.
• Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters).
• Floating edge-correction roller.
• Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line.
• Connecting walkway allowing web threading at floor level while keeping full access to the slitting station.
• All web path rollers are anodized.
• Safety guarding for operator protection.
Slitting section:
A slitting station with individual pneumatic knives and circular counter-knives:
• Shear cut performed against the counter-knives.
• Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic.
• Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation.
• 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm.
• Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length.
Web separation section:
• A separator roller driven by the slitting motor; angle and curvature fully adjustable.
Lay-on roller:
• Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials).
• Pressure is adjustable and synchronized with winding diameter.
• Roller is removable.
Automatic splicing / transverse cutting system:
• Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores.
Trim extraction system:
• Trim suction unit with two width-adjustable nozzles.
• Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included).
Rewinding section:
• Motorized turret (two-position) supporting two rewinding shafts.
• Rewinding shaft drive by an oversized asynchronous motor.
• Hydraulic centering point for the active rewinding roll.
• Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders.
• Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.
Success:
Your message has been sent.
Listing
Oosterhout
7,151 km
Packaging line with Rovema MVP 280/400
ROVEMAMVP 280/400
Call
Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, total height: 3,950 mm, total width: 6,691 mm, The complete packaging line is ready for immediate use. The Rovema MVP 280/400 (2011) was fully overhauled and rebuilt in 2022/2023 by DL Packaging and has seen only limited use since then. Available for type of packaging: Block bottom bag and Pillow bag.
Predpjzi Ebcefx Alwjb
The packaging line consists of:
Product infeed conveyor
Multihead weigher (10–1,000 g, up to 65 weighings/min)
Rovema MVP 280/400 packaging machine (2011)
Markem-Imaje printer
Stand-up pouch device including 1 set of forming parts
Format set for flat bags (250 mm)
Discharge conveyor for finished bags
Frame for stable, vibration-free installation of the multihead weigher: approx. 2800 × 2800 × 2200 (H) mm, made of painted steel, including stairs and handrails
The machine is equipped with a Siemens S7 control system and operator interface and features a sealing system for heat-sealable packaging materials, including PP films as well as laminated films with a thickness of 50 to 100 µm.
A complete packaging solution ready for immediate production use.
Success:
Your message has been sent.
Listing
Sesto Calende
6,884 km
CNC working center with edging
BiesseRover A Edge 1632
Call
Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software
bEdge module for edge management
bSolid surface design
Sophia - IoT Connection
Office control
Working range on X-axis mm 3228
Working range on Y axis mm 1580
Working range on Z axis mm 200 with H74 mm suction cups
Working range on Z axis mm 245 with H29 mm suction cups
No. 8 adjustable ATS panel support bars
Installation of the pneumatic lock divided into two zones in Y
No. 6 Pneumatic Bakelite bars for panel lifting
No. 3 adjustable suction cups for bar
Set-Up Assistant for Suction Cups
No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling
liquid, HSK cone attachment, 20000 RPM
Automatic tool change with 16 positions on the X-axis of the carriage
Drilling tesa BH17 independent spindles arranged as follows:
No. 5 independent spindles for vertical drilling in the "X" direction
No. 5 independent spindles for vertical drilling in the "Y" direction
No. 4 spindles for horizontal drilling in the "X" direction
No. 2 spindles for horizontal drilling in "Y" direction
No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm)
GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes
maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp
edge heating - edge feed system - edge cutting system - possibility of
Introduction of the manual edge
Plastic edge thickness from 0.4 to 3 mm
Wood edge thickness from 0.4 to 2 mm
Laminated edge thickness from 0.4 to 1.2 mm
Maximum edge width 65 mm
Workpiece thickness from 10 to 60 mm
Minimum internal radius workable with 30 mm edging
Maximum external radius for edging, proportionate to the thickness and stiffness of the edge:
Pjdeugpwnepfx Alwerb
* 10 mm with edge up to 1 mm thick
* 20mm with 2mm thick edge
* 30mm with 3mm thick edge
Minimum dimensions of the edging panel 300 x 300 mm
Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel
maximum thickness 18 mm
2-position edge storage unit positioned inside the protective casings for edges with maximum thickness
65 mm
Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a
cleaning cycle
No. 1 aggregate for edge trimming / rounding
No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper
Perimeter protection grids
Chip evacuation system with motorized belt
Liquid cooling system
Automatic lubrication system
No. 1 vacuum pump of 250 m3/h
TECHNICAL DETAILS TO BE CONFIRMED

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Silvi
6,448 km
PVC Line – Welding + Corner Machine
YilmazTK 503
Call
Condition: new, PVC Line – YILMAZ TK 503 Single-Head Welding Machine + YILMAZ CA 601 Corner Cleaning Machine – Year 2023
The line consists of two professional machines designed for welding PVC profiles and subsequently cleaning the welded corners:
YILMAZ TK 503 single-head welding machine
YILMAZ CA 601 corner cleaning machine
Together, these two machines make it possible to complete the PVC profile welding cycle and subsequently remove welding beads and processing residues from the welded corners.
1. YILMAZ TK 503 - Single-Head Welding Machine for PVC
Single-head welding machine designed to join PVC profiles at continuously adjustable angles ranging from 30° to 180°.
The machine allows the operator to select the welding bead thickness between the standard 2.0 mm configuration and the reduced 0.2 mm configuration. The melting and welding times, pressure and temperature can be adjusted according to the profile specifications.
Main features
Continuously adjustable welding angle from 30° to 180°
Standard 2.0 mm or reduced 0.2 mm welding bead
Maximum profile height: 165 mm
Automatic start and completion of the welding cycle
Adjustable temperature from 0 to 300°C
Separate profile clamping by foot pedal
Quick mould-change system
Support arms for long profiles
Quick replacement of the Teflon coating
Mobile machine frame
Included accessories
Profile support arms on both sides
Electric foot pedal
Technical specifications
Installed power: 1.5 kW
Power supply: 230 V AC, single-phase
Frequency: 50/60 Hz
Air consumption: 20 l/min
Operating pressure: 6–8 bar
Dimensions: 600 × 1,915 × 1,400 mm
Net weight: 113 kg
Gross weight: 128 kg
2. YILMAZ CA 601 - Corner Cleaning Machine for PVC
Corner cleaning machine designed for finishing PVC profiles welded at 90°. The machine cleans the upper and lower surfaces and the external corners, accurately removing welding beads and residues generated during the welding process.
The hydropneumatic system, PLC control and vertical and horizontal clamps ensure stability and precision throughout the working cycle.
Main features
Cleaning of PVC profiles welded at 90°
Cleaning of upper and lower surfaces and external corners
PLC control system
Hydropneumatic operation
Maximum profile dimensions: 130 × 180 mm
Minimum profile dimensions: 30 × 30 mm
Pneumatic blade-change system
Profile clamping by vertical and horizontal clamps
Profile centring system
Adjustable cleaning tools for laminated and non-laminated profiles
Single or multiple cleaning cycles
Automatic cycle start and stop
Included accessories
Predpjz D Dhzsfx Alwjb
Compressed-air gun
Support table
Two milling cutters for cleaning white profiles
Technical specifications
Installed power: 1.2 kW
Power supply: 400 V AC, three-phase
Frequency: 50/60 Hz
Maximum cutter diameter: 215 mm
Bore diameter: 32 mm
Air consumption: 36 l/min
Operating pressure: 6–8 bar
Dimensions: 1,375 × 2,405 × 1,255 mm
Net weight: 176 kg
Gross weight: 210 kg
Success:
Your message has been sent.
Listing
Berlin
6,575 km
Servo Driven Pouch Making Machine
MamataVega-Plus-610
Call
Condition: used, Year of construction: 2015, Processing Specifications:
Maximum processing width: 610 mm
Minimum processing width: 210 mm
Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration
Minimum draw length without interruption: 50 mm
Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration
Minimum draw length with interruption: 100 mm
Maximum cycle rate: 210 cycles/min
Maximum line speed: 50 m/min
Unwinder:
Podpfx Ajzqt Dnjlworb
Maximum reel diameter: Ø1,000 mm
Maximum reel weight: 700 kg
Web width with 48-inch unwinder: 410–1,220 mm
Web width with 60-inch unwinder: 410–1,520 mm
Processable Materials:
Polyester laminates: from 40 μm
BOPP laminates: from 40 μm
CPP laminates: from 40 μm
Nylon-based co-extruded films: from 50 μm
EVOH-based co-extruded films: from 50 μm
LD/LLD-based co-extruded films: from 50 μm
BOPP film: from 30 μm
Aluminum foil structures
Coated paper
Tyvek
Maximum sealable film thickness: 150 μm
Pouch Types:
• TSP pouches
• Stand-up pouches
• Supported-film pouches
Electrical Data:
Power supply: AC, 3 Phase
Available voltage: 20 / 240 / 380 / 415 / 480 V ±6%
Frequency: 50/60 Hz
Machine-specific supply: 380 V, 50 Hz, 3 Phase
Machine electrical load: 35 kVA
Pneumatic Requirements:
Air consumption: 1,000 L/min at NTP
Installed configuration air requirement: 3,000 L/min
Minimum operating pressure: 6 kg/cm²
Air supply must be free from moisture and dust
Cooling Water:
Water consumption: 20 L/min
Required water temperature: 15–17 °C
Standard Machine Features:
• Servo-driven film indexing
• Microprocessor-based control
• Operator console for process parameter settings
• Servo tension dancer assemblies with feedback control
• Tail-feed-assisted film draw mechanism
• Servo-driven reciprocating sealing system
• Servo-actuated sealing bars
• Progressive sealing and rapid seal-area cooling
• Three-stage bottom sealing followed by cooling
• Adjustable sliding sealing stations
• PID temperature controllers with auto-tuning
• Photo-registration mark scanner
• Guillotine-type shearing station with servo fine adjustment
• Trimming station with trim removal
• Recipe memory for frequently used jobs
• Adjustable sealing temperature, pressure and dwell time
• Automatic stacking system
Success:
Your message has been sent.
Listing
Berlin
6,575 km
Doctor Rewinder
EuromacCB 500S
Call
Condition: used, Year of construction: 2018, GENERAL TECHNICAL DATA:
Performance
• Maximum speed: up to 400 m/min
• Speed dependent on material properties and slitting conditions
Web & Dimensions
Working width: 40 – 400 mm
Maximum web width: 400 – 450 mm
Roll Specifications
Maximum unwind roll diameter: 520 mm
Maximum rewind roll diameter: 520 mm
Maximum roll weight: 100 kg
Pedpfjyx Dc Tox Alwerb
Core diameters:
• Unwinding: 76 mm (3”), adapter 120 mm
• Rewinding: 76 mm (3”), adapter 120 mm
Materials
• Paper
• Aluminium
• Laminates
• Flexible films
• Material thickness:
- Films: 30 – 100 µm
Electrical Data
Main supply: 3 × 400 V, 50 Hz
Auxiliary voltage: 220 V AC / 24 V DC
Installed power: approx. 8 kW
Pneumatic Requirements
• Air pressure: 6 bar
Machine Features
• Center winding system with contact rollers
• Shaft winding system (expandable mandrels)
• Reversible winding direction
• Edge guiding system (FIFE with SE46C sensor)
• Glue table with 2 independent clamping bars
Cooling System
• Electrical cabinet cooling: Water cooling (HÄWA)
Noise Level
• Sound level: < 75–80 dB
Safety
• Floor scanner
• Side protection fence
Success:
Your message has been sent.
Listing
Leinfelden-Echterdingen
6,843 km
FGT Graphic Machinery - LABELFINISHER
GRAFOTRONICDCL 2, Age: 2018
Call
Year of construction: 2018, condition: like new (used), GRAFOTRONIC DCL2, Age: 2017/2018
Predpfoncfukjx Alweb
Manufacturer : GRAFOTRONIC
Year of Installation : 2017 with Upgrade 2018
Max. width: 350mm
Unwinding diameter: 1000mm
Web edge control
Semi rotary printing unit
GEW Drying UV
Semi-rotative die-cutting / drawn onto sheet metal
Laminating
Cold foil stamping
Labelshifter
Punching length: 609,6mm
Lattice proofing
manual knife box
Automatic Turret
2 x spindle
Success:
Your message has been sent.
Listing
Isselburg
7,039 km
Site caravan
BlyssSTAY COMFORT | SITZGRUPPE | WEISS 370x210X230CM 1300KG BAUWAGEN
Call
Condition: new, *IMMEDIATELY AVAILABLE*
Includes: Sandwich panel construction
Equipment:
- Sink
- Electric heater
- Refrigerator
Net: €9,151.26 / Gross: €10,890.00
Article number: BBC113372123.01
Technical data:
• Brand: Blyss
• Model: Comfort
• Vehicle type: Site trailer
• Vehicle condition: New
• First registration: Not yet registered
• TÜV/MOT: 2 years from first registration
Psdpfezy Dfzjx Alwerb
• Internal dimensions (L x W x H): 370 x 210 x 230 cm
• External dimensions (L x W x H): 542 x 222 x 290 cm
• Permissible total weight: 1,300 kg
• Unladen weight: 830 kg
• Payload: 470 kg
• Chassis: High loader (wheels under the body)
• Tires: 195/55R10C
• Suspension: ALKO rubber spring axle
• Support wheel: Yes
• 100 km/h approval: Optional, can be retrofitted
DESCRIPTION
• Welded frame, hot-dip galvanized
• V-drawbar
• Chassis ALKO
• Braked rubber spring axle
• Ball coupling
• Support wheel
• Electrical system - 13-pin 12V connector
• Downpipe supports with bracket - 4 pcs
• Multiplex wood floor
• Walls - 25mm sandwich panel, smooth laminate, RAL9016 color
• Ventilation grilles - 2 pcs
• Entrance door in the front wall
• Entry step made of tread plate
• Window in the rear wall with shutters
• Socket
• Switch box
• 230V electrical installation
• Double sockets - 3 pcs
• Ceiling light - 1 pc
• Table and benches for 4 people
• Shelf above the window
• Built-in refrigerator
• Sanitary module (1.5-chamber stainless steel sink, faucet, 5 l boiler, 2 x 19 l canisters for clean and dirty water, soap dispenser, paper towel dispenser)
• Clothes rail - 4 hooks
• Curtain rod with fireproof curtain
• Electric heater 2000W
• Towing handles - 2 pcs
_____
Accessories can be retrofitted by our specialist workshop!!
- Please feel free to inquire about specific requests!
_____
- Financing or leasing possible
- Nationwide delivery possible
- All prices include VAT
- Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided.
- Export license plates incl. customs registration possible
Descriptions and images are protected by copyright!!
Anhänger Zentrum BAUMANN GmbH
Dekkers Waide 17
46419 Isselburg
Over 1,200 trailers immediately available for you!
We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years.
- Errors, omissions and prior sale are subject to change -
Success:
Your message has been sent.
Listing
Wassenberg
7,061 km
Fully automatic high-performance laminator
KMK1650HG
Call
Condition: new, Year of construction: 2026, functionality: fully functional, ## Description
The KMK 1650HG flute laminating machine is a fully automatic, high-performance laminating machine for the precise bonding of printed top sheets to corrugated board or cardboard. It was specifically developed for the production of high-quality packaging and impresses with its high production speed, exact sheet positioning, and reliable laminating quality.
Thanks to state-of-the-art servo and PLC control, automatic sheet feeder, and intelligent positioning technology, the KMK 1650HG is ideal for packaging manufacturers who place the highest demands on quality, precision, and productivity.
### Highlights
* Fully automatic flute laminating machine
* High-precision servo positioning system
* Suitable for large sheet formats up to 1,650 × 1,650 mm
* Automatic high-performance feeder for top sheets
* Uniform adhesive application thanks to stainless steel adhesive roller
* Intelligent PLC and touchscreen control
* High production output with maximum precision
* Robust industrial design for continuous operation
* Simple operation and short setup times
### Application Areas
The machine is ideally suited for the production of:
* Corrugated board packaging
Prodozg E Tyspfx Alweb
* Folding cartons
* Food packaging
* Cosmetic packaging
* Pharmaceutical packaging
* Display packaging
* Presentation packaging
* Packaging made of cardboard and corrugated board
### Technical Data
* Maximum sheet format: 1,650 × 1,650 mm
* Minimum sheet format: 380 × 350 mm
* Top sheet: 120–500 g/m²
* Bottom sheet: A, B, C, E, and F flute corrugated board, 4-ply corrugated board, and cardboard from 300 g/m²
* Positioning accuracy: ±1 mm
* Machine power: 25 kW
* Adhesives: White glue or starch glue
* Machine dimensions (L × W × H): 15.5 × 2.6 × 2.4 m
### Standard Equipment
* Automatic high-performance feeder
* Automatic pre-stacking system
* Servo-controlled positioning system
* Stainless steel adhesive roller with uniform adhesive application
* Water cooling of the cleaning roller
* PLC control with touchscreen
* Photoelectric sensors for precise sheet alignment
* CE-compliant electrical control
### Optional Equipment
* Side paper feed for particularly large and heavy bottom sheets
### Included in Delivery
✅ New machine directly from the manufacturer
✅ 2-year warranty
✅ Professional installation and complete assembly by experienced KMK technicians
✅ On-site machine commissioning
✅ Free instruction and training for your operating personnel
✅ Comprehensive after-sales service and technical support even after installation
### Machine Type
Fully automatic flute laminating machine for cardboard and corrugated board
KMK 1650HG Flute Laminating Machine
Success:
Your message has been sent.
Listing
Cantù
6,845 km
Panel cleaner
GNT - ITALYS 1300/2
Call
Condition: good (used), Code: 0026
Brand: GNT - ITALY
Model: S 1300/2
Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc.
Composition:
Steel base
Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material
Independent brush and felt rolls control to get back wearing down
Motorvariator with continuous adjustment for advancement
Motorvariator with continuous adjustment for humidifyng unit
Brushes to clean the finishing felt rollers
Residue collection tanks
Emergency device to check thickness
Technical data
Working width mm 1300
Working height mm 6/80
Feed speed from 5 to 20 mt/min
Working height mm 800
N° 3 dust hoods mm 150
Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17
Predpfjvw Uf Djx Alwjb
Overall dimensions mm 2600 x 2280 x 1360 h
Weight kg 2250
Success:
Your message has been sent.
Listing
Leinfelden-Echterdingen
6,843 km
FGT Graphic Machinery - LABELPRESS
NilpeterF3000
Call
Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter
Model: F3000
Machine No.: F-2002
Year of manufacture: Approx. 1994–1998
Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate.
Printing process: Flexographic printing + Screen printing
Flexographic printing units: 5
Screen-printing units: 2
Prjdeztqrnjpfx Alweb
Availability: By arrangement
_____
TECHNICAL CONFIGURATION
Printing Units
• 5 flexographic printing units
• 2 screen-printing units
• Combination of flexographic and screen printing within one production line
• Suitable for standard as well as specialty label applications
• Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units
_____
Drying System
• 5 UV drying units
• 5 hot-air drying units
• Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements
• Flexible drying configuration for different materials and coating applications
_____
Web Handling
• Unwinding section
• Web transport through the complete production line
• Turnbar system
• Delamination / relamination system
• Suitable for reverse-side printing and multilayer label applications
• Stable web handling throughout the production process
_____
Laminating Section
• Integrated laminating unit
• Suitable for protective lamination
• Suitable for multilayer label structures
• Allows inline finishing without the need for a separate laminating machine
_____
DIE-CUTTING AND CONVERTING
The machine is equipped with an extensive converting section:
• 3 rotary die-cutting stations
• 1 additional die-cutting station for sheet delivery
• Integrated sheet delivery
• Suitable for multiple cutting, perforating, and converting operations
• Flexible configuration for different label and converting applications
_____
SHEET DELIVERY
• Integrated sheet delivery system
• Additional die-cutting station dedicated to sheet production
• Enables the machine to produce both roll-to-roll and roll-to-sheet products
• Additional flexibility for specialty applications
_____
INCLUDED ACCESSORIES
The machine is supplied with a considerable quantity of production tooling and accessories.
Magnetic Cylinders
• 10 magnetic cylinders
Anilox Rollers
• 21 anilox rollers
Printing and Rubber Rollers
• 5 rubber rollers
• 10 printing rollers
Additional Tooling
• Various additional cylinders
• 1 new slitting cylinder
• Further tooling available with the machine
The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation.
_____
Success:
Your message has been sent.
Listing
Meppen
6,985 km
Office container
20DV BÜROCONTAINER Büro Container 20FT
Call
Condition: used, For sale: 20DV office container, available from Meppen.
✅ CONTAINER TYPE: 20DV office container
✅ DELIVERY CONDITION: used, weatherproof and watertight, without equipment.
The container has electrical wiring and heating, and the entrance door is on the short side. Laminate flooring can be installed. Original photos available.
✅ DIMENSIONS L x W x H: 6058 x 2990 x 2800.
✅ TRANSPORT: Please provide your postal code so we can prepare a free and non-binding quote for the container, including delivery and, if necessary, unloading from the truck.
✅ VARIETY: In addition, you will find a wide range of sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, etc.) and for every need. Whether for storage, construction projects, logistics solutions, or sea transport.
Podsz E Iyqjpfx Alwjrb
We look forward to hearing from you!
NAUTEXA GmbH
Success:
Your message has been sent.
Listing
Siedlce
5,967 km
Sliding Table Saw
CORMAKMJ45-KD3 (3200)
Call
Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw
The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation.
Main Advantages of the Machine
High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials.
5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades.
Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels.
Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability.
Prodpfxovuf Iqe Alwjb
Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit.
Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels.
Automatic blade lifting system – improves convenience and safety during setup.
Construction and Technology
The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy.
The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications.
High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes.
Precision and Working Efficiency
The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds.
The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces.
With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications.
Standard Equipment
Main motor 5.5 kW and scoring motor 1.1 kW
Cutting unit with tilt and height adjustment
Sliding table 3200 × 420 mm
Crosscut fence and rip fence with precision adjustment
Tilting upper blade guard
Integrated dust extraction system with Ø100/80 mm outlets
Blade angle and height indicators
Complete technical documentation
Technical Specifications
Parameter Specification
Main saw blade diameter / bore 350 / 30 mm
Saw blade tilt range 0°–45°
Main blade speed 2800 / 4000 / 4800 rpm
Scoring blade diameter / bore 125 / 20 mm
Scoring blade speed 7500 rpm
Work table dimensions 945 × 720 mm
Sliding table dimensions 3200 × 420 mm
Maximum cutting height 100 mm
Cutting width with rip fence 1250 mm
Crosscut capacity with crosscut fence 3200 mm
Dust extraction outlet under table Ø100 mm
Dust extraction outlet on blade guard Ø80 mm
Minimum air velocity 20 m/s
Minimum air flow 565 m³/h
Main motor power S1/S6 5.5 kW / 9 HP
Scoring motor power S1/S6 1.1 kW / 1.8 HP
Weight 850 kg
Success:
Your message has been sent.
Listing
Leinfelden-Echterdingen
6,843 km
FGT Graphic Machinery - Digital label production and finishing
XEIKON+GMCX500+DCV finis.
Call
Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press)
Year of Manufacture: 2018
Print Media Handling
• Roll-to-roll configuration with variable repeat length
• Print width: 508 mm
• Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage
• Media weight: 40 – 350 gsm (27 lb text to 130 lb cover)
Print Engine
• 5-color dry toner technology
• Resolution: 1200 dpi
• Color configuration:
o CMYK
o Single-pass opaque white
o Gamut extension
o Custom spot colors
_____
GM DC5V8-BX Converting & Finishing System
Year of Manufacture: 2011
Web Specifications
• Web width: 200 – 520 mm
• Substrate thickness: 20 – 200 microns
• Machine speed (semi-rotary): up to 55 m/min
Main Units & Features
• Unwind unit (max. diameter: 700 mm)
• BST web guide with splice table
• Servo-controlled flexo printing unit
• UV curing unit
• Laminating unit
• Vetaphone corona treater
• Die-cutting unit
o Plate size: 50.8 mm – 520.7 mm
o Magnetic cylinder: Z200
• Waste rewinder (diameter: 500 mm)
• Slitting unit
• Two rewind stations
• Pre-installed buffer system for Xeikon digital press
• Touch-screen operator control panel
_____
SYSTEM BENEFITS
Prodpfx Ajx Hh A Holweb
When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling:
• High-quality digital printing
• Inline or nearline converting
• Flexo varnish, lamination, die-cutting, slitting, rewinding
• Fast job changeovers
• Efficient production of short, medium, and long runs
Ideal for label converters seeking a compact, flexible, and fully integrated solution.
_____
CONDITION OF THE MACHINES
• Both machines are in good used condition
• Fully operational prior to decommissioning
• Offered as part of a combined setup for optimal productivity
_____
Success:
Your message has been sent.
Listing
Piera
7,475 km
Blister packaging machine
ANCIMOAC-60CL
Call
Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE
Manufacturer: ANCIMO
Model: AC-60 CL
Year of manufacture: 2016
Condition: Excellent. Very few operating hours. Complete documentation available.
GENERAL DESCRIPTION
Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials.
The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package.
The machine is in excellent condition and has complete technical documentation.
TECHNICAL SPECIFICATIONS
• Thermoforming area: 400 x 200 mm
• Heat sealing area: 400 x 200 mm
• Installed power: 21 kW
• Electrical power supply: 380 V III + N
• Approximate dimensions: 7,400 x 963 x 1,900 mm
COMPATIBLE MATERIALS
• PVC
• PVDC
• Polyethylene (PE)
• Aluminum
• Cardboard
• Laminated materials and other thermoformable materials
EQUIPMENT INCLUDED
• Automatic thermoforming unit
• Heat sealing system
• Trimming unit for individual blisters
• Unwinder / film feeder
• Rewinder for collecting trims and waste
• Coil handling trolley
• Coil loading trolley
• Format changeover trolley
DOCUMENTATION
• Original manuals
• CE marking
• Electrical diagrams
• Pneumatic diagrams
ADVANTAGES
Prjdpfszcftgox Alwsb
• European manufacturing
• Year 2016
• Very few operating hours
• Excellent overall condition
• Wide range of compatible materials
• Format changes using a dedicated trolley
• Available for immediate inspection
Success:
Your message has been sent.
Listing
Leinfelden-Echterdingen
6,843 km
FGT Graphic Machinery - Converting
ABG InternationalDIGICON
Call
Year of construction: 2006, condition: good (used), Configuration
• Unwinder
• Register Control System
• Flexo Unit (Ink / Varnish application)
• Laminating / Cold Foil Unit
Podjynkwnjpfx Alwjrb
• Die Cutting Unit
• GEW UV Dryer
• Slitting Unit
• Rewinder
_____
Machine Description
The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production.
The installed flexo unit allows varnish or spot colour application.
The laminating / cold foil module enables added-value embellishment.
The die-cutting and slitting units ensure precise finishing and roll conversion.
The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity.
_____
Success:
Your message has been sent.
Listing
Siedlce
5,967 km
Table Saw
CORMAKTS250C 400V
Call
Condition: used, Year of construction: 2026, CORMAK TS250CL Table Saw
The TS250CL is a high-quality table saw designed for professional users who require reliability, precision, and a compact machine design. The saw combines advanced technical solutions found in higher-class models with an accessible and practical format. It is an excellent choice for small woodworking workshops, furniture production, and craft applications, providing high cutting efficiency and excellent machining quality.
Main Advantages of the Machine
Pedpfxoz E Hm Ae Alwsrb
Maximum blade diameter of 254 mm – enables deep cuts at various angles.
2.2 kW (S1) / 3.1 kW (S6) motor – provides constant power even during intensive operation.
Blade tilt adjustment from 90° to 45° – allows precise bevel and angled cuts.
Compact construction – allows optimal use of limited workshop space.
Stable and extended work table up to 1000 mm in length – ensures accurate material guidance.
Efficient dust extraction system with 100/25 mm outlets – improves cleanliness and operator comfort.
Construction and Technology
The TS250CL table saw is built on a robust welded frame that provides excellent rigidity and resistance to vibration. The main mechanical components are manufactured from high-quality steel and cast iron, ensuring durability and long service life.
The heart of the machine is a powerful induction motor with a continuous operating power of 2.2 kW (S1), supported by an increased power mode of 3.1 kW (S6), allowing efficient cutting of hard wood species and wood-based materials.
The installed 254 mm carbide-tipped saw blade enables effective cutting with a maximum depth of 80 mm at 90° and 65 mm at 45°, meeting the requirements of most woodworking operations. The blade speed of 4000 rpm ensures clean and accurate cutting lines.
Precision and Working Efficiency
The combination of a rigid construction and a precise blade guidance system allows the TS250CL table saw to deliver repeatable and accurate results. Thanks to the possibility of extending the work table to a length of 1000 mm, large workpieces can be guided comfortably and safely.
Applications
The CORMAK TS250CL table saw is an excellent solution for:
Woodworking workshops – for cutting solid wood, MDF boards, plywood, and laminates.
Furniture manufacturers – where dimensional accuracy and high surface quality are essential.
Craft workshops – as a versatile and compact table saw for professional use.
Standard Equipment
Circular saw blade 250 × 30 × 2 mm
Work table extension
Dust extraction outlets 100/25 mm
Stops and guards ensuring safe operation
Optional Equipment
Parallel guide system
Crosscut sliding carriage for repetitive cutting
Dedicated dust extraction system
Technical Specifications
Parameter Specification
Maximum blade diameter / bore 254 × 30 mm
Blade speed 4000 rpm
Blade tilt range 90°–45°
Maximum cutting depth at 45° 65 mm
Maximum cutting depth at 90° 80 mm
Cutting width with table extension 750 mm
Maximum cutting length 1000 mm
Dust extraction outlet 100/25 mm
Work table dimensions 635 × 420 mm
Work table dimensions with extension 635 × 1500 mm
Motor power 2.2 kW (S1) 400V / 3.1 kW (S6)
Weight 110 kg
Dimensions 1450 × 1000 × 1100 mm
Please note!!! This is a display model and shows visible signs of assembly. No warranty and no returns.
Success:
Your message has been sent.
Listing
Schloß Holte-Stukenbrock
6,891 km
Laminating machine
BillhöferFK 102 S
Call
Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker.
The machine is suitable for both wet and thermal lamination.
Minimum format: 250 x 360 mm
Maximum format: 1020 x 1240 mm
Prjdpoz Ai Dnjfx Alweb
Material weight: 100-450 g/m²
Success:
Your message has been sent.
Listing
Leinfelden-Echterdingen
6,843 km
FGT Graphic Machinery - Converting
GMDC5V8-BXE DIGITAL CONVERTING &FINISHING
Call
Condition: good (used), Year of construction: 2013, • Model: GM DC5V8-BXE
• Year of Manufacture: 2013
• Web Width: 200 – 520 mm
• Substrate Thickness: 20 – 200 microns
• Machine Speed (Semi-Rotary): up to 55 m/min
Unwind & Web Control
• Unwind unit with max. 700 mm diameter
• BST web guiding system with splice table
• Touch screen control panel
Printing & Surface Treatment
• Servo-controlled flexographic printing unit
• UV curing unit
Prodpfxex Hab Us Alwsb
• Vetaphone corona treatment unit
Finishing & Converting Modules
• Laminating unit
• Die-cutting unit, die plate size 50.8 – 520.7 mm
• Magnetic cylinder: Z 200
• Semi-rotary die cutting
• Slitting unit
• Waste rewind up to 500 mm diameter
• 2× rewind stations
Integration
• Pre-installed buffer system for Xeikon digital press
(Ideal for inline or near-line workflow)
Success:
Your message has been sent.
Listing
Siedlce
5,967 km
Sliding Table Saw
CORMAKPS12E-1600
Call
Condition: new, Year of construction: 2026, The CORMAK PS12E-1600 panel saw with scoring unit is a solid and precise panel saw designed for working with furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its two-axis cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without tear-out or chipping, which is crucial in the production of furniture and finishing elements.
Main Advantages of the Machine
Dual cutting system: main blade + scoring blade eliminate the risk of laminate delamination.
Stable cast-iron worktable: ensures precision and rigidity even under heavy loads.
Large 1600 mm sliding table: designed for cutting large-format components.
High-performance 3.8 kW (400 V) motor: enables effortless cutting of even hard materials.
Adjustable cutting angle up to 45°: allows angled cuts without compromising accuracy.
Precision side fence: equipped with an accurate scale for repetitive cutting.
Dust extraction: effectively removes dust and keeps the workstation clean.
Complete standard equipment: includes, among other things, a scoring blade, measuring fences, blade guard, and tilt indicator.
Construction and Technology
The construction of the saw is based on a ground cast-iron worktable and a bearing-mounted sliding table with a support, ensuring stability and full control over the material during cutting. High-quality guides enable smooth movement, while the reinforced body construction eliminates vibrations. The control panel, ergonomically positioned at the front of the machine, provides convenient adjustment of the cutting height and cutting angle. The blades are driven by a 3.8 kW motor, which provides a substantial power reserve when processing difficult materials.
Precision and Work Efficiency
The CORMAK PS12E-1600 table saw with scoring unit has been designed with high repeatability and accuracy in mind. The cutting depth and angle are adjusted using lockable adjustment knobs, which increases safety and operating comfort. The high rotational speed of the saw blades (up to 5800 rpm for the scoring blade) enables fast and clean cuts without causing a burning effect on the material.
Standard Equipment
Saw blade
Scoring blade
Crosscut fence
Rip fence
Blade guard
Table extension
Mitre fence
Blade tilt indicator
Eccentric clamp
Polish-language manual
EC Declaration of Conformity
Optional Equipment
Saw blades with different diameters and tooth configurations
Trolleys for large-format materials
Dust extraction systems
Side and rear table extensions
Technical Data:
Sliding table length [mm]
1600
Cutting width on the right-hand side [mm]
1260
Saw blade tilt [°]
45
Cutting height at 45° [mm]
80
Pedpfxovuf Uqj Alwsrb
Cutting height with 315 mm circular saw blade installed at 90° [mm]
100
Cutting height with 300 mm circular saw blade installed at 90° [mm]
95
Maximum saw blade dimensions [mm]
315 x 30
Maximum scoring blade dimensions [mm]
100 x 20
Main saw blade speed [U/min]
4500
Scoring blade speed [U/min]
5800
Motor power [S1/S6]
3.8 kW / 6.1 HP
Power supply
3 phases, 400 V
Weight [kg]
275
Warranty [months]
12
Manual (DTR)
YES
CE Declaration
YES
Success:
Your message has been sent.
Listing
Radom
6,026 km
Automatic Creaser
Morgana Autocreaser PRO 33Automatic Creaser
Call
Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine
Prsdpfx Aljzt H Rmeweb
The machine is fully operational and ready to use.
It is the most efficient creasing system on the market, with a robust construction.
Made in England.
Non-stop vacuum feeding with the ability to add material during operation.
Built-in compressor.
Instruction manual included.
Manufacturer’s description:
The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation.
The 7″ color Smart Screen programmer allows for easy machine programming.
Working width up to 330 mm
Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5)
Paper feeding via a vacuum cylinder
Programmable up to 16 creases in a single pass, unlimited number of programs
Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm)
Option to install additional perforating discs – 20, 28, 56, or 90 notches
Technical parameters:
Maximum format (width/length): 330 x 700 mm
Minimum format: 140 x 210 mm
Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material
Minimum grammage: 0.11 mm
Maximum number of creases in a single pass: 16
Number of programs: alphanumeric, unlimited
Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing)
Min. creasing distance from the front edge: 2.5 mm
Min. creasing distance from the rear edge: 35 mm
Minimum distance between creases: 1 mm
Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm
Net weight: 121 kg
Power supply: 230V, 50 Hz
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Bischofszell
6,837 km
LAMINATOR
NESCHENCOLDLAM 1650
Call
Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 6037409-120, max. 1650 mm working width
wide range of material and high flexibility
maximum speed of 8 m/min for increased production capacity
electrical nip adjustment of 40 mm for precise operation
Pedpfx Aoz D U Tuslworb
heated top roller (70°C) for superb lamination performance
variable roller technology for better processing of soft substrates
flip up infeed table to facilitate easy setup
pull-out trough for easy feeding of single prints up to 10 m
additional control panel at the rear of the machine
roll to roll built in
outboard brakes for a better control of material unwind
robust model range
Safety:
foot switch for hands free operation
self-checking safety eyes for increased operator safety
removable finger guard ledge
CE certified
Success:
Your message has been sent.
Listing
Radom
6,026 km
Laminating machine
Autobond Mini 105 TPH-RU-SAB-VSAutomatic Laminating Machine
Call
Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine
The most efficient machine on the market from a legendary manufacturer.
This advanced machine boasts high performance thanks to an external heating thermostat.
Made in Great Britain.
Technical specifications:
Max sheet size: 1060mm x 1060mm
Min sheet size: 320mm x 285mm
Min grammage: 115 gsm
Max grammage: 650 gsm
Operating temperature: 80-135°C
Psdozz Hfyopfx Alwerb
Max operating speed: 120m/min
Weight: approx. 4500 kg
380V power supply
Additional 8 bar air supply
Large-diameter, chrome-plated steel cylinder, filled with water for greater stability.
Double-sided laminating
Pneumatic clamping, separation, and automatic feeding. Adjustable pressure.
High-stack feeding, Heidelberg Speedmaster feed head.
Expansion roller for film fixing.
Sheet straightening module.
Stacker for sheet removal.
The machine can operate in pallet-to-pallet or pallet-to-roll configurations.
Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.
Success:
Your message has been sent.
Listing
Cazaci
5,558 km
LAMINA CLG 1816 Laminating Machine
Lamina SystemCLG 1816
Call
Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER
1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT
LAMINA CLG 1816 Crash Lock Folder Gluer available for sale.
Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications.
The machine can work with both cold glue and hot-melt adhesive.
MACHINE SPECIFICATIONS
• Manufacturer: LAMINA System AB, Sweden
• Model: CLG 1816
• Machine type: Crash Lock Folder Gluer
• Year of manufacture: 2013
• Serial number: 801213
• Gluing system: NORDSON
• Gluing configurations: 1, 3 or 4 glue points
• Adhesive: Cold Glue and Hot-Melt
• Operating hours: 3,525 hours
• Total boxes glued: 1,595,966
Prodpfx Aljzyu Nqjwjb
• Automatic feeding
• Automatic folding and gluing
LOW USAGE
Although the machine was manufactured in 2013, it was used in production for only approximately one year.
The machine currently shows:
3,525 operating hours
1,595,966 boxes glued
This represents a relatively low level of use for an industrial folder gluer of this type.
Success:
Your message has been sent.
Listing
Leinfelden-Echterdingen
6,843 km
FGT Graphic Machinery - Converting
ABGDIGICON
Call
Year of construction: 2005, condition: good (used), Year of manufacture: 2005
Machine type: Label converting and finishing machine
Condition: Used – good working condition
Location: Germany
Technical Configuration:
• Die-cutting station – 152 teeth
• Semi-rotary operation possible
• Full rotary operation possible
• 1 UV curing unit
• 1 air dryer
• Lamination unit installed
• Cold foil application possible (rollers missing)
• Crush knife slitting system
Equipment:
• 1 anilox roller – 140 lpi / volume 8.5
• 2 printing cylinders
• 4 lacquer cylinders
• 4 ink trays
• 1 extra fountain roller
• Core holders:
– 2 × core 40 mm
– 2 × core 45 mm
– 4 × core 76 mm
Podpfxjyrg Nzs Alwjrb
Application and Advantages:
The ABG Digicon is a renowned converting platform engineered for efficient label finishing. Suitable for:
• Rotary and semi-rotary die cutting
• Varnishing and coating processes
• Lamination
• Slitting and rewinding
With its flexible configuration, the machine enables label converters to efficiently perform post-printing finishing operations, enhancing productivity and reducing handling steps. ABG is globally recognized as a specialist in finishing and converting equipment for the label industry, known for precision engineering, reliability, and long service life.
We make it easier for you to find: "laminating installation"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month







































































































































































































































