Used Lasagna Sheet Inserter for sale (10,307)

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN064871, Sound insulation, RFID chips, LiServ 4.0, energy measurement package, ME 5000, barcode scanner. Gsdpfxszzmgke Akasug

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Gujdpfx Akezwt Rboaog

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2-meter swivel bending machine from Schroder Type: MAKV Guodpfxszgtmzj Akajg Capacity: 2050 x 2.0 mm POS 200 control system Year of manufacture: 2007

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Guodpfx Akezy Uvksasg Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Godpfxozl A Ras Akaoug Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. The machine is available for inspection and testing; it is live. Guodev Tnfiopfx Akaog Please contact us with any questions.

Condition: used, including 36 plastic plates and 2 end plates of stainless steel Gsdpez Aiy Asfx Akasug dimension ca. 260x90x160 cm Distance between first plate and spindle approx ca. 120cm

Condition: new, functionality: fully functional, Fiber Laser Cutting Machine for Sheet Metal – Different Sizes & Laser Powers Description Industrial CNC fiber laser cutting machine for high-speed and precise cutting of sheet metal. Suitable for general metal fabrication as well as production of HVAC components, ventilation parts, electrical cabinets, machine enclosures, brackets, roofing and facade elements and other sheet metal products. The machine can be configured individually according to the customer's required working area, material type and cutting thickness. Suitable materials: Carbon / mild steel Stainless steel Galvanized steel Aluminum Brass Copper Gsdpfxeztx Epj Akaoug Standard configuration example Working area: 1500 × 3000 mm Laser power: 1500 W Cutting thickness: approx. 0.5–10 mm, depending on material and cutting conditions Positioning accuracy: up to ±0.01 mm Max. idle speed: 80–110 m/min Acceleration: up to 1G Cooling: water cooling Cutting gases: oxygen / nitrogen / compressed air Power supply: 380 V, 3 Ph, 50/60 Hz File formats: DXF, PLT, AI, NC and others Other working areas and laser powers available Depending on the production task, machines can be supplied with different working areas, including: 1300 × 2500 mm 1500 × 3000 mm 1500 × 4000 mm 1500 × 6000 mm 2000 × 6000 mm 2500 × 6000 mm 2500 × 12000 mm 2500 × 14000 mm Available laser powers include approximately: 1.5 / 2 / 3 / 6 / 8 / 12 / 20 / 30 / 60 kW, depending on machine configuration. The catalogue includes large-format systems up to 2500 × 14000 mm and laser sources up to 60 kW. Higher laser power allows processing of thicker material and/or significantly increases cutting speed on thinner sheet. The required laser power is selected according to steel grade, maximum thickness, required cutting speed and cutting gas. Available configurations Open single working table Exchange table Fully enclosed machine Large-format cutting machine Automatic loading/unloading Dust and fume extraction Automatic lubrication Different laser powers and table dimensions Applications Ideal for sheet metal processing, HVAC and ventilation production, steel fabrication, machinery manufacturing, electrical enclosures, construction components, metal furniture, roofing and facade production. The machine can be integrated with press brakes, guillotines, roll forming machines and other sheet metal processing equipment. SEO Keywords fiber laser cutting machine, CNC laser cutter, sheet metal laser cutting machine, metal laser cutter, steel laser cutting machine, fiber laser 1500W, 3000W laser cutter, 6000W fiber laser, 12000W laser cutting machine, high power fiber laser, large format laser cutting machine, sheet metal cutting machine, CNC metal cutting machine, industrial laser cutter, galvanized steel laser cutting, stainless steel laser cutter, HVAC laser cutting machine, metal fabrication equipment, 1500x3000 laser cutter, 2000x6000 laser machine, 2500x12000 laser cutter.

Condition: used, Plate formats: 400x400 Platefilter features: Manual spindl Details Offered without filterplates. We offer separte filterplates in plastic or stainless steel. Dimension ca. 300x60x100 cm Distance between first plate and spindle approx. 170cm Guedpfjz Ad Dvjx Akaeg

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Gjdpfx Aoylhkyekasug Max stroke: 290 mm Controlled axes: X, Y, R Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution The machine is fully operational and in good overall condition.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Turnover module also available optional. Year of built: 2009 Configuration: Gsdezv Tl Aopfx Akaoug - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - 1x AS2 shuttle feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! Godpfx Aev N N Spskaeug 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. Gusdpfxozix Ats Akajg The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Condition: good (used), functionality: fully functional, We are offering our used sheet piling shear for sale. Gsdezxc I Eepfx Akajug This machine was developed and built by us in the past for cutting sheet piles to size. The machine is in good working condition and is still in use. However, as we currently have very few projects that require this machine, we have decided to sell it. Optionally, the associated racking system for storing the sheet piles can also be included. The suction cup that is currently attached can also be included. However, the suction cup is not currently functioning properly; the problem is likely in the mechanism. Also, the remaining stock of sheet piles can be taken over upon consultation. If you have any questions or would like more information, please send us a message or call us.

Condition: used, Year of construction: 2019, total length: 5,100 mm, total width: 2,300 mm, total height: 2,400 mm, Weight: 10.470 kg With Pneumatic sheet-support - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No Guedpfx Aow E H Sqokaeg - Serial number: 6922191908 - Drive system: CNC - Control system brand: Cybelec - Control system type: D-Touch-7 - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Backgauge depth [mm]: 1000 - Transport dimensions: 5100mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10470kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), HAULICK slitting shear for rolled sheet metal / rotary knife shear -Max. sheet thickness: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Knife diameter: approx. 120 – 150 mm -Table size: approx. 500 x 250 mm -Overhang / feed area: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: belt drive -Straight cuts -Strip cutting -Endless cutting of sheet metal -Steel sheet up to approx. 2.5 mm -Aluminum and non-ferrous metals, correspondingly thicker Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 180 kg Guodpsztctwsfx Akasg Errors and omissions excepted

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm Guedpfx Asygv S Ujkaeg - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet metal width: 3240 mm Sheet metal thickness: 2.5 mm Equipment: - Electric rear gauge, 1500 mm - CNC control for bending angle adjustment - Segment tooling - Foot switch Gujdpfx Aozwt Rzjkaeg

Year of construction: 1988, condition: used, Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Gusdpszwclhofx Akaog Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

Condition: excellent (used), functionality: fully functional, Siemens SIMODRIVE 611 Testing and Repair Station For sale: a professional testing and repair station for Siemens SIMODRIVE 611 LT modules and control units. Suitable for testing, diagnosing, troubleshooting, repairing, and performing functional checks on various Siemens SIMODRIVE 611 components. Suitable for: * 6SN1123 – LT/power modules * 6SN1118 – Control units Ideal for repair shops, CNC service providers, maintenance departments, and industrial electronics. The testing station is suitable for functional testing and diagnosing components before or after repair. Gsdpfxezzlu Hj Akaeug Sold complete as shown in the picture.

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm Gusdpfxsumpq Nj Akaeg - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: like new (used), Year of construction: 2022, functionality: fully functional, hinge drilling and insertion machine Gjdpfx Aszk Tpwokasug

Condition: like new (used), DCE Insert Filter Type: DLM V9/15 k5 Excl. fan (fan specifications are known) Incl. new filter fabrics Filter frame length: 1500 mm Guedpfxexc Enpo Akajg See our other listings VMA Wekerom

Condition: used, functionality: fully functional, plate width: 1,250 mm, Punching force: 30 tons Maximum sheet width: 1,250 mm Gusdozvxlzopfx Akajg Maximum sheet length: 2,000 mm Maximum steel thickness: 6 mm Operating speed: 480 strokes/min

Condition: good (used), total width: 1,000 mm, total length: 1,400 mm, total height: 870 mm, For sale is a solid, cast-iron straightening and marking plate with dimensions of 1400 x 1000 mm. This plate comes from a metal or sheet metal processing workshop and is ideally suited for straightening work, measuring tasks, jig and fixture construction, as well as assembly and testing operations. Technical specifications: Dimensions: 1400 x 1000 mm Material: Cast iron Heavy-duty industrial design Transport openings on the sides Includes 4 adjustable straightening supports Condition: Used Robust workshop design Normal signs of wear and storage Immediately available Application areas: Mechanical engineering Toolmaking Welding technology Sheet metal processing Measuring and testing operations Jig and fixture construction Other Inspection possible by appointment. Please note that the sale of this straightening plate is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. Gusdpfx Akezwuaqsajg • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.