Used Celtic 12 for sale (22,410)

Condition: used, Technical details: turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm Fjdpfx Aaju Ixy Djtspl -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Fsdpfx Aajzy U Ruetopl Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8696, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,500 mm Overall height: 3,100 mm MACHINE DETAILS Mast type: Simplex ISO class: 3 (2,500–4,999 kg) Fjdpfx Aszy U Sroatopl Drive type: Internal combustion engine Operating hours: 7,673 h EQUIPMENT Fork positioner Heater Full cabin External reference: SL9839SP

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: SRC12NC0423, controller manufacturer: Siemens, overall weight: 700 kg, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 70 l, operating pressure: 210 bar, number of digital displays: 1, Equipment: emergency stop, Tube Expanding/Reducing Machine PE-TRA SRC-12 NC We offer a used, fully functional PETRA SRC-12 NC machine for hydraulic tube end expanding/reducing. The machine is designed for professional industrial applications. The machine features 12 expanding stations, enabling multi-stage forming processes. The design was developed with demanding industrial applications in mind, including the production of tubular structures, the shipbuilding industry, industrial installations, and the production of exhaust systems. Key features: - Manufacturer: PETRA - Model: SRC-12 NC - Used machine - 12 expanding stations - Hydraulic drive system - Hydraulic system power: 4.5 kW - Maximum hydraulic pressure: 210 bar - Hydraulic tank: 70 l - Control: Siemens PLC + HMI - Operator panel with touchscreen - Simple selection and adjustment of tool stations - Programmable and adjustable expanding sequences - Foot control - Power supply: 380 V / 3 phases / 50 Hz - Robust construction for industrial applications Applications: - Production of tubes and tubular components - Shipbuilding industry Fpjdjzy I H Njpfx Aatsl - Industrial installations - Production of exhaust systems - Forming and expanding tube ends Transportation is the responsibility of the buyer.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, overall weight: 230 kg, Kappel Suction Lifter Model: DSZ2 / 12 V Fjdpfxjzxy T Se Aatspl Year: 2012 Drive: Battery-powered Lifting capacity: 1500 kg Suction plate: 6

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Fjdpezr Uq Sofx Aatopl Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Fpodpfx Aaezl D Ruetol Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,501 h, load capacity: 230 kg, fuel type: electric, battery voltage: 24 V, working height: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 230 kg Working height: 12,000 mm MACHINE DETAILS Fuel type: electric Battery voltage: 24 V Fpsdpfx Aszza A Eoatol External reference: SL16691SLO

Condition: good (used), Year of construction: 2019, operating hours: 1,90,711 h, functionality: fully functional, type of input current: three-phase, total width: 2,500 mm, total length: 3,300 mm, total height: 2,000 mm, compressed air connection: 6 bar, filling weight (min.): 400 g, Equipment: documentation/manual, Filling machine for liquid or semi-viscous products, suitable for filling Doypack pouches. In its current configuration, it has been used for filling 200g containers. The machine is equipped with a lid mounting and sealing unit. Fpsdoza Aimopfx Aatel Further information available upon request.

Condition: used, functionality: fully functional, machine/vehicle number: A600003888, Year of construction: 2022, operating hours: 64 h, load capacity: 227 kg, lifting height: 3,660 mm, fuel type: electric, battery voltage: 24 V, overall weight: 863 kg, Equipment: CE marking, We are offering this used SkyJack SJ 12 scissor lift, manufactured in 2022. Model number: SJ 12 Type group: 3 A Serial number: A600003888 Maximum platform height (indoor): 3.66 m Maximum platform height (outdoor): 3.66 m Capacity (indoor): 227 kg Maximum number of people (indoor): 2 people Fjdpfjzrzy Hox Aatopl Maximum wind speed (indoor): 0.00 m/s Maximum manual force (indoor): 400 N Capacity (outdoor): 227 kg Maximum number of people (outdoor): 1 person Maximum wind speed (outdoor): 12.5 m/s Maximum manual force (outdoor): 200 N Machine weight: 863 kg System pressure: 207 bar Maximum tilt angle (indoor): 3.00 ° Maximum tilt angle (outdoor): 1.50 ° Voltage: 24 V Year of manufacture: 2022 If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Fodpfxjy D Rk Ij Aatepl Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Fpsdpfx Asy R Dqhjatel

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CAB7211522, JAKA ZU 7 collaborative robot (cobot), CAB 12, year of manufacture 2021, complete, serial number CAB7211522. 2 units available: 1 x 950 mm, 1 x 819 mm. Price applies to 1 unit. Year of manufacture: 2021 Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 819/954 mm Scope of delivery: Robot, controller, cables, software Used item – normal signs of wear. Further details, article numbers and pictures available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. Fedpfx Aaozmqt Sjtopl The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of units, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: INV 42, The shears were purchased new from China in 2012. The machine is in fully working condition but has not been used for the past 5-6 years. It has been replaced by laser cutting machines. Metal cutting shears from China Country of origin: China Year of manufacture: 2009 Maximum cutting length: L=3200mm Maximum sheet thickness: 12mm, at a tensile strength of 500N/mm2 Model: Y160L-4 Main motor power: P=15kW Number of strokes during normal operation: n=10/minute Pump pressure: Pp= 31.5 Mega Pascals Pump capacity: V= 40l/min Fpjdpezwvwksfx Aatel Minimum sheet thickness for cutting: 0.5 mm Machine weight: 9,600 kg

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table, and additional automation Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control system: BABYPLAST - Touchscreen Additional equipment: Production line with robot, rotary table, and additional automation Vertical injection molding machine Air valves Injection for mold separation Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor, which is controlled via an inverter – very precise Automatic parts feeding with quality control system Machine work area protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70 x 1.00 x 1.65 m Fpedpfx Aaszy H Rgetel All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 2600-12/1.85 IRC M2004 robot, complete 1 x Serial number 2600-102039 1 x Serial number 2600-102040 Fpjdpfx Aajzm Ikhjtjl Controller: IRC5 M2004 Number of axes: 6 Max. payload: 12kg Max. working range: 1850mm Year of manufacture: 12/2013 Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Price is per robot. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to abroad on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,000 kg, total length: 12,500 mm, total width: 5,600 mm, machine/vehicle number: 0-280-15-2017, We offer a used, automatic, two-chamber loading station from the renowned BARGSTEDT brand, model RTBH22/D/30/12. This unit is ideal for modern woodworking facilities where efficiency and process automation are crucial. Thanks to its two chambers, it ensures continuous operation and significantly improves material handling, minimizing downtime. The robust construction and the reliability of the BARGSTEDT brand guarantee long-lasting, trouble-free operation. Automatic loading from two chambers. Capacity: 8 cycles/minute. Loading with vacuum suction cups. Maximum panel size: 1300*2500. Fsdpjzgcd Ajfx Aatspl Option to purchase the entire line, including a roller conveyor equipped with a conical swivel and a double-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3.

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Fjdpfjywclwsx Aatopl Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Fpsdpfx Aozwgiqjatol

Condition: used, Year of construction: 2006, capacity / hour ca.: 12000 working direction: right-left (CCW) Strom / Volt: 400 Technical data: working direction: right-left, rotative, counter clockwise capacity bph max.: 12000 labels: hot melt labels number of labelling stations: 1 Fsdpfx Aajzzpa Hstspl number of bottle plates: 12 bottle diamater max (mm): 120 bottle diamater min (mm): 60 bottle height max (mm): 350 bottle height min (mm): 200 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, Year of construction: 2005, For wine and sparkling wine bottles Type: WD/ 12 Fpsdpfxszzi Dfe Aatjl capacity / hour ca.: 6000

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw chip conveyor Fpsdpfx Aajxwufaotol - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Fodpfxsz Aalvo Aatjpl Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Fjdpfjy T Iyrox Aatjpl Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: good (used), functionality: fully functional, The hot runner system from PSG is for sale; Type: profiTEMP+12 Power: 22 kW Includes wiring diagram 12-cavity system Fodpfx Aaozu I A Hotspl