Used Leiner Kkd-30 for sale (25,076)

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Manufacturer: WEIMA Maschinenbau GmbH Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Kdjdpfx Aozxrxgjf Hot Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, Aspo Kdjdpfxozy Un Hs Af Hot Load capacity: 30,000 kg Maximum belt width: 2,000 mm Minimum belt width: 400 mm Maximum coil diameter: 1,850 mm Minimum diameter: 900 mm

Condition: used, Year of construction: 2009, wheel diameter 300 mm grinding wheel width 50 mm no. of working stations 2 Stück turning speed range - stepless 1.450 / 2.900 U/min voltage 400 V total power requirement 1,6 / 22 kW weight of the machine ca. 130 kg Kdodezzrc Dspfx Af Hst dimensions of the machine ca. 1,10 x 0,50 x 1,30 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 090303004

Condition: reconditioned (used), Year of construction: 2008, Horizon HT-30 Used trimmer for cutting three sides in a single pass Year 2008 Counter: approximately 1.7 million cuts Standard equipment Inspected, cleaned, and refurbished Kdsdpfx Afezxdhys Het Option to add A6-size trimming capability – please let us know! Excellent condition Available in stock

Condition: good (used), Year of construction: 2013, fuel type: gas, fork length: 2,710 mm, Maximum passing height: 0,218 cm Kdedpfxezntvfs Af Het CE mark: yes Technical condition: good Visual appearance: good Production country: FR Please contact Christian Theißen for more information Manufacturer: Manitou Model: MI 30 G Year of build: 2013 Condition: Used Data: Max. lifting height: 4,59 m Max. Lifting capacity: 3.000 kg Length forks: 1,80 m Drive type: Gas Dimensions LxW (without forks): 2,71 x 1,24 m Stowed height: 2,18 m Empty weight: 4.750 kg Special features: White tires. Side shifter, street lighting, trailer operation possible. Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 1999, LVD PPEB110/30 CAD-CNC 110T Serial number: 26225 Year of manufacture: 1999 Bending length: 3050 mm Servohydraulic bending system Kodpfx Aszzafgjf Hjdt Precise slider positioning using a linear encoder Suitable for precise sheet metal bending.

Condition: used, axle configuration: 2 axles, loading space length: 74,600 mm, loading space width: 22,700 mm, loading space height: 13,800 mm, Year of construction: 2000, Equipment: ABS, = Additional Options and Equipment = - Rear air suspension - Front air suspension = Notes = For vehicle inquiries, please contact Mr. Seidel (by phone). Trailers LTD SDC 30/2 tipping trailer. Additional rear work lights, BPW axles, Wabco ABS, drum brakes, first axle liftable, central lubrication, air suspension, tire tread depth: 1st axle 11-15mm, 2nd axle 9-13mm, cargo area dimensions: length: 7,460mm, width: 2,270mm, height: 1,380mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our website. ... Errors, changes and prior sale excepted!!! Ksdpfx Aszi I Hbjf Hjdt = Further Information = gross vehicle weight: 30,000 kg Please contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Kdodpfx Ajzwhk Njf Hst Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven Kedezp Ip Aepfx Af Hedt - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Kdsdpfsxzuiaox Af Hst

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. Kjdpfx Aozxbnqef Hodt DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute Kdodpfezd Hb Hex Af Het - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: used, axle configuration: 3 axles, first registration: 02/2000, color: other, Year of construction: 2000, Empty weight: 4.680 kg Axle 1: left 6 mm right 6 mm Axle 2: left 12 mm right 12 mm Axle 3: left 8 mm right 8 mm Kdedpfxoxywpas Af Hjt We have the possibility to stack trailers!

Condition: used, Year of construction: 2014, operating hours: 36,909 h, machine/vehicle number: TP125, Used Tetra Pak Cap30flex - year 2014Technical Specifications & Performance DataThe Tetra Pak Cap 30 Flex is a robust, second hand capping machine engineered for industrial packaging and beverage production on carton lines. Configured for HeliCap 26 Pro closures and optimized for the Square 1000 format, it supports reliable, continuous operation at high throughput. This used capping machine brings dependable performance to any modern used bottling line or packaging system requiring precise cap application on 1.0L cartons.Manufacturer: Tetra PakModel: Cap 30 FlexProduction speed: up to 9,000 pieces/hourClosure type: HeliCap 26 ProPackage format: Square 1000 (1.0L carton)Container compatibility: CartonCompliance: CE markedApplication: Cap application/capping for carton packagesAdvanced Automation & Control SystemsDesigned with an industrial-grade automation platform, the Cap 30 Flex ensures precise, repeatable capping quality. The system typically features PLC-based control with HMI for recipe selection and format management. Coordinated drives maintain accurate positioning and torque control, while integrated sensors enable cap presence detection and fault handling. Quick-access guarding and guided diagnostics streamline routine checks, and saved recipe parameters reduce human error during changeovers, supporting maximum uptime in beverage production.Production Line Integration CapabilitiesEngineered for seamless integration with Tetra Pak carton fillers and standard conveyor systems, this capping machine fits inline as part of a complete industrial packaging solution. Mechanical and electrical interfaces synchronize with upstream filling and downstream inspection, case packing, and palletizing equipment. The cap feeder and chute are designed to deliver stable, jam-resistant cap supply at high speeds, making it ideal for second hand packaging machinery configurations and used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently disconnected, indicating it has been removed from active production and prepared for relocation and recommissioning. Its CE conformity and recent manufacturing year support reliable performance following standard installation, alignment, and validation procedures commonly applied during start-up of used bottling equipment.Operational Performance & VersatilityConfigured for HeliCap 26 Pro closures on Square 1000 cartons, the Cap 30 Flex delivers consistent application quality aligned with stringent beverage packaging standards. Its precise cap alignment and secure application protect product integrity throughout logistics. The modular design aids layout flexibility and supports continuous operation typical of high-efficiency industrial packaging lines.Installation Requirements & Site PreparationInstallation requires stable flooring, sufficient clearance for the cap feeder and operator access, and standard utilities used by packaging machinery, including electrical power and compressed air. Correct line-height alignment with the filler and conveyors is essential to ensure smoot... Kdodpjzb Ikljfx Af Hst

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge Kdedpfx Afozycpxs Hot * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm 1.020 x 510 mm WINMAX 12.000 U/min 13,5 kW 24 St. SK 40 | | 20 bar 35/35/30 m/min 5,0 t used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel Kodpfsznnc Tex Af Hedt

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 4.950 kg Axle 1: left 5 mm right 5 mm Kjdpfx Afezkldae Hodt Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: used, Year of construction: 2021, Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible. Kjdpfsz Da R Esx Af Hodt

Condition: used, Year of construction: 2013, fuel type: electric, Mast: articulated arm Kdjdpfszrrxgex Af Het Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information

Condition: good (used), mileage: 9,06,455 km, power: 341 kW (463.63 HP), first registration: 09/2012, fuel type: diesel, tire size: 445 / 65 / R22.5, axle configuration: 8x6, wheelbase: 6,150 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,760 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, power mirror, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 16 gears, Automatic Axle configuration Make axles: Ginaf Brakes: drum brakes Front axle: Tyre size: 445 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 445 / 65 / R22.5; Differential lock; Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 2: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 3: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Weights Empty weight: 15.815 kg Carrying capacity: 27.185 kg GVW: 43.000 kg Functional Kodpfx Ajz Dr Rwjf Hjdt Crane: VDL S-30-6600, year of manufacture 2012, behind the cab Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Armrest - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Power take-off (PTO) - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Kedpfx Ajz Adb Ujf Hjdt

Condition: used, axle configuration: 3 axles, first registration: 04/1998, color: other, Year of construction: 1998, Empty weight: 3.980 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 6 mm right 6 mm Kjdpfx Aeyw S D Aof Hsdt We have the possibility to stack trailers!

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/1990, loading space length: 6,650 mm, loading space width: 2,450 mm, loading space height: 1,970 mm, total length: 9,450 mm, total width: 2,500 mm, total height: 3,280 mm, suspension: steel, tire size: 275/70 R22.5, wheelbase: 4,870 mm, color: other, Year of construction: 1990, Superstructure Volume: 32 m3 = More information = Axle configuration Tyre size: 275/70 R22.5 Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Rear axle 2: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Rear axle 3: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.270 kg Carrying capacity: 19.730 kg GVW: 28.000 kg Functional Tipper: Back Maintenance, history and condition APK (MOT): tested until 05/2027 Technical condition: very good Visual appearance: very good Identification Registration number: WD-16-VG = Dealer information = For more photos see: Kodpfxsy I Ampj Af Hedt Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, machine/vehicle number: 296510, Machine: Bortolin Kemo FOC 23/30 Carton erector FOC 23/30 Kdodpfx Aez An Rmsf Hst

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm Kdsdjxcukaspfx Af Hot range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German